If I used VPN on all devices than no, I wouldn't need most of this but I don't run VPN on all devices so I chose to use DoT and DNSSEC on all devices including those on VPN (in this way I also get Diversion working) , so unbound is fine as long as I don't have issues (which I guess most of them because of turning on Local Cache) .
Installing and configuring authoritative, recursive, and DoT/DNSSEC DNS server with Unbound
- Thread starter rgnldo
- Start date
rgnldo
Very Senior Member
To use Unbound you must enable local caching.
rgnldo
Very Senior Member
Update tips
For some reason, integration with the Diversion + Unbound solution is working. I disabled Merlin's native NTP server and installed AMTM's NTPMerlin. I also checked the option on WAN: Forward local domain queries to upstream DNS. Funcional Unbound with Diversion + Skynet. Enjoy
For some reason, integration with the Diversion + Unbound solution is working. I disabled Merlin's native NTP server and installed AMTM's NTPMerlin. I also checked the option on WAN: Forward local domain queries to upstream DNS. Funcional Unbound with Diversion + Skynet. Enjoy
Marin
Very Senior Member
How to start unbound from Entware (I assume default prefix /opt is used). I still forward queries from dnsmasq (well it is a query forwarder) to unbound, listening to port 5453. The Unbound will cache services, and authoritative dns recursion.
Credits contributions [B][COLOR=#b30000]@SomeWhereOverTheRainBow[/COLOR][/B] @Swistheater (for Stubby.yml)
Contributions to this post are well received
Install NTPMerlin script AMTM
Install unbound
Run unbound-control-setup for Unbound monitoring
Create /opt/var/lib/unbound directory
Change directory ownership to nobody, in case you want to drop daemon privileges from root to nobody
Edit /opt/etc/unbound/unbound.conf
Add unbound-anchor to unbound without stubby
Add FORWARD-ZONE to mate stubby-melimCode:# DNSSEC validation module-config: "validator iterator" auto-trust-anchor-file: "/opt/var/lib/unbound/root.key"
Get root DNS server:Code:forward-zone: #Local Stubby name: "." forward-addr: 127.0.1.1@53
Code:curl -o /opt/var/lib/unbound/root.hints https://www.internic.net/domain/named.cache
Edit and start unbound daemon
Code:#!/bin/sh if [ "$1" = "start" ] || [ "$1" = "restart" ]; then # Wait for NTP before starting logger -st "S61unbound" "Waiting for NTP to sync before starting..." ntptimer=0 while [ "$(nvram get ntp_ready)" = "0" ] && [ "$ntptimer" -lt "300" ]; do ntptimer=$((ntptimer+1)) sleep 1 done if [ "$ntptimer" -ge "300" ]; then logger -st "S61unbound" "NTP failed to sync after 5 minutes - please check immediately!" echo "" exit 1 fi fi export PATH=/sbin:/bin:/usr/sbin:/usr/bin:$PATH export TZ=$(cat /etc/TZ) ENABLED=yes PROCS=unbound ARGS="-c /opt/var/lib/unbound/unbound.conf" PREARGS="nohup" DESC=$PROCS PATH=/opt/sbin:/opt/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin . /opt/etc/init.d/rc.func
Create dnsmasq custom configuration in /jffs/scripts/dnsmasq.postconf:
Code:#!/bin/sh if [ "$(nvram get dnspriv_enable)" = "1" ]; then if [ "$(nvram get ntp_ready)" = "1" ]; then if [ -f /opt/etc/init.d/S61unbound ]; then source /usr/sbin/helper.sh pc_delete "no-negcache" /etc/dnsmasq.conf pc_delete "no-negcache" /etc/dnsmasq.conf pc_delete "bogus-priv" /etc/dnsmasq.conf pc_delete "domain-needed" /etc/dnsmasq.conf pc_delete "server=127.0.0.1" /tmp/resolv.dnsmasq pc_delete "server=127.0.0.1#5453" /tmp/resolv.dnsmasq pc_append "server=127.0.0.1" /tmp/resolv.dnsmasq pc_append "server=127.0.0.1#5453" /etc/dnsmasq.conf pc_replace "cache-size=1500" "cache-size=0" /etc/dnsmasq.conf else source /usr/sbin/helper.sh pc_delete "server=127.0.0.1#5453" /tmp/resolv.dnsmasq pc_delete "server=127.0.0.1" /tmp/resolv.dnsmasq pc_append "server=127.0.0.1" /tmp/resolv.dnsmasq fi fi fi if [ "$(nvram get dns_local_cache)" = "1" ]; then { NTPSERVERS="" for VAR in 0 1; do NTP="$(nvram get "ntp_server$VAR")" [ -n "$NTP" ] && NTPSERVERS="$NTPSERVERS/$NTP" done [ -z "$NTPSERVERS" ] && NTPSERVERS="/pool.ntp.org" for DNS in $(nvram get wan_dns); do echo "server=$NTPSERVERS/$DNS" done for DNS in $(nvram get ipv6_get_dns); do echo "server=$NTPSERVERS/$DNS" done for VAR in 1 2 3; do DNS="$(nvram get "ipv6_dns$VAR")" [ -n "$DNS" ] && echo "server=$NTPSERVERS/$DNS" done echo "server=$NTPSERVERS/127.0.1.1" } >> "$1" fi
Stubby valid procedure current FW 384.13.
Configure Stubby for DNSSEC validation:
nano /jffs/configs/stubby.yml.add
Code:dnssec_return_status: GETDNS_EXTENSION_TRUE tls_min_version: GETDNS_TLS1_2 tls_cipher_list: "EECDH+AESGCM:EECDH+CHACHA20" tls_max_version: GETDNS_TLS1_3 tls_ciphersuites: "TLS_AES_128_GCM_SHA256:TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256"
chmod +x /jffs/configs/stubby.yml.add
run service restart_stubby
this sets the TZ for accurate sysloging, and nohup allows for commands to be used to verify active listening addresses these different commands can be runned via command line
ps | grep unbound | grep -v grep
netstat -lnptu | grep unbound
netstat -lnpt | grep -E '^Active|^Proto|/unbound'
last thing, I treated this like a headless server situation
i opted to install haveged with
opkg install haveged
then I modified /opt/etc/init.d/S02haveged
nano /opt/etc/init.d/S02haveged
NOTE: It is advisable to configure swap memory.Code:#!/bin/sh if [ "$1" = "start" ] || [ "$1" = "restart" ]; then # Wait for NTP before starting logger -st "S02haveged" "Waiting for NTP to sync before starting..." ntptimer=0 while [ "$(nvram get ntp_ready)" = "0" ] && [ "$ntptimer" -lt "300" ]; do ntptimer=$((ntptimer+1)) sleep 1 done if [ "$ntptimer" -ge "300" ]; then logger -st "S02haveged" "NTP failed to sync after 5 minutes - please check immediately!" echo "" exit 1 fi fi export TZ=$(cat /etc/TZ) ENABLED=yes PROCS=haveged ARGS="-w 1024 -d 32 -i 32 -v 1" PREARGS="" DESC=$PROCS PATH=/opt/sbin:/opt/bin:/opt/usr/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin . /opt/etc/init.d/rc.func
https://i.ibb.co/0YLYqjg/query.png
This pic shows this setting as “Yes” but the the other pic below it still has this setting selected as “No”. Could you please clarify the correct choice.
Thank you!
Sent from my iPhone using Tapatalk
rgnldo
Very Senior Member
Add this to dnsmasq.postconf:
Code:
CONFIG=$1
source /usr/sbin/helper.sh
pc_delete "no-negcache" $CONFIG
pc_delete "bogus-priv" $CONFIG
pc_delete "domain-needed" $CONFIG
pc_replace "cache-size=1500" "cache-size=0" $CONFIG
pc_append "server=127.0.0.1#5453" $CONFIGMake the backup. Remove the NTP parameters in the start scripts. Return has worked.
rgnldo
Very Senior Member
Fixed up. Review the tip
Nope. Disconnect after a while . Trying to update Skynet blocklist and it happens. (disconnects and then connects again but the connection is actually working all the time)
rgnldo
Very Senior Member
You are using FW 384.14_alpha1. I didn't test this one.
Its the same its still not available ... However, are you sure setting "Local Cache" to No doesn't work? because I changed it to No and restarted unbound ,dnsmasq and stubby, I still see that it is working , DNSSEC also working (disabled in GUI) through Unbound . Here is the statistic from the log :
Code:
Aug 22 14:48:14 unbound: [990:0] info: server stats for thread 1: 84 queries, 8 answers from cache, 76 recursions, 0 prefetch, 0 rejected by ip ratelimiting
Aug 22 14:48:14 unbound: [990:0] info: server stats for thread 1: requestlist max 42 avg 10.6184 exceeded 0 jostled 0
Aug 22 14:48:14 unbound: [990:0] info: average recursion processing time 0.266426 sec
Aug 22 14:48:14 unbound: [990:0] info: histogram of recursion processing times
Aug 22 14:48:14 unbound: [990:0] info: [25%]=0.065536 median[50%]=0.203162 [75%]=0.416346
Aug 22 14:48:14 unbound: [990:0] info: lower(secs) upper(secs) recursions
Aug 22 14:48:14 unbound: [990:0] info: 0.000000 0.000001 5
Aug 22 14:48:14 unbound: [990:0] info: 0.004096 0.008192 2
Aug 22 14:48:14 unbound: [990:0] info: 0.016384 0.032768 2
Aug 22 14:48:14 unbound: [990:0] info: 0.032768 0.065536 10
Aug 22 14:48:14 unbound: [990:0] info: 0.065536 0.131072 8
Aug 22 14:48:14 unbound: [990:0] info: 0.131072 0.262144 20
Aug 22 14:48:14 unbound: [990:0] info: 0.262144 0.524288 17
Aug 22 14:48:14 unbound: [990:0] info: 0.524288 1.000000 11
Aug 22 14:48:14 unbound: [990:0] info: 1.000000 2.000000 1
Last edited:
rgnldo
Very Senior Member
So far I couldn't understand the FW Merlin Local Cache. If you launch the command
Code:
dig snbforums.comrgnldo
Very Senior Member
Note, with the NO-RESOLV + CACHE-SIZE + 127.0.0.1#5453 option dnsmasq will ignore queries in the /etc/resolv.conf file, will not cache and forward these services to Unbound.
These commands should return '0' on the second attempt, signaling the query cache.
Go testing. If it works, please report here. This will help improve the post.
These commands should return '0' on the second attempt, signaling the query cache.
Code:
dig snbforums.com
dig snbforums.com @127.0.0.1 -p 5453Go testing. If it works, please report here. This will help improve the post.
I enabled Stubby integration . Setting Wan: Use local caching DNS server as system resolver=No solves all the issues with NTP\Disconnections.
And everything working fine (Skynet, Diversion+pixelserv) ... Unbound does seem to work , you can see queries num and you can see how much answered from cache,,,
By the way, if DNSSEC wasn't done by Unbound, It wouldn't work (With Cache set to 0) because with Merlin's FW DNSSEC, cache must be at least 200 (if I recall ) otherwise it will scream and DNSSEC will not work.
With -p 5453 (cahe size is 0 , changed by dnsmasq.postconf) :
Code:
; <<>> DiG 9.12.3-P4 <<>> snbforums.com @127.0.0.1 -p 5453
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 26433
;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1
;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 1472
;; QUESTION SECTION:
;snbforums.com. IN A
;; ANSWER SECTION:
snbforums.com. 3525 IN A 104.25.235.15
snbforums.com. 3525 IN A 104.25.234.15
;; Query time: 0 msec
;; SERVER: 127.0.0.1#5453(127.0.0.1)
;; WHEN: Thu Aug 22 15:11:04 IDT 2019
;; MSG SIZE rcvd: 74Statistics after half an hour:
Code:
Aug 22 15:43:15 unbound: [3644:1] info: server stats for thread 1: 182 queries, 16 answers from cache, 166 recursions, 0 prefetch, 0 rejected by ip ratelimiting
Aug 22 15:43:15 unbound: [3644:1] info: server stats for thread 1: requestlist max 9 avg 1.74699 exceeded 0 jostled 0
Aug 22 15:43:15 unbound: [3644:1] info: average recursion processing time 0.419671 sec
Aug 22 15:43:15 unbound: [3644:1] info: histogram of recursion processing times
Aug 22 15:43:15 unbound: [3644:1] info: [25%]=0.211588 median[50%]=0.367002 [75%]=0.522416
Aug 22 15:43:15 unbound: [3644:1] info: lower(secs) upper(secs) recursions
Aug 22 15:43:15 unbound: [3644:1] info: 0.004096 0.008192 1
Aug 22 15:43:15 unbound: [3644:1] info: 0.008192 0.016384 1
Aug 22 15:43:15 unbound: [3644:1] info: 0.032768 0.065536 6
Aug 22 15:43:15 unbound: [3644:1] info: 0.065536 0.131072 12
Aug 22 15:43:15 unbound: [3644:1] info: 0.131072 0.262144 35
Aug 22 15:43:15 unbound: [3644:1] info: 0.262144 0.524288 70
Aug 22 15:43:15 unbound: [3644:1] info: 0.524288 1.000000 33
Aug 22 15:43:15 unbound: [3644:1] info: 1.000000 2.000000 8
Aug 22 15:43:15 unbound: [3644:0] info: server stats for thread 0: 184 queries, 20 answers from cache, 164 recursions, 0 prefetch, 0 rejected by ip ratelimiting
Aug 22 15:43:15 unbound: [3644:0] info: server stats for thread 0: requestlist max 8 avg 1.73171 exceeded 0 jostled 0
Aug 22 15:43:15 unbound: [3644:0] info: average recursion processing time 0.422724 sec
Aug 22 15:43:15 unbound: [3644:0] info: histogram of recursion processing times
Aug 22 15:43:15 unbound: [3644:0] info: [25%]=0.184845 median[50%]=0.351174 [75%]=0.610781
Aug 22 15:43:15 unbound: [3644:0] info: lower(secs) upper(secs) recursions
Aug 22 15:43:15 unbound: [3644:0] info: 0.032768 0.065536 5
Aug 22 15:43:15 unbound: [3644:0] info: 0.065536 0.131072 20
Aug 22 15:43:15 unbound: [3644:0] info: 0.131072 0.262144 39
Aug 22 15:43:15 unbound: [3644:0] info: 0.262144 0.524288 53
Aug 22 15:43:15 unbound: [3644:0] info: 0.524288 1.000000 33
Aug 22 15:43:15 unbound: [3644:0] info: 1.000000 2.000000 14
Last edited:
Marin
Very Senior Member
Add unbound-anchor to unbound without stubbyComo iniciar desvinculado Entware (presumo padrão prefixo / opt é usado). Eu consultas ainda para a frente de dnsmasq (bem, é um encaminhador de consulta) para não ligado, ouvindo a porta 5453. O Unbound irá armazenar em cache serviços e recursividade de DNS autoritário.
Créditos contribuições [UTILIZADOR = 64179] @SomeWhereOverTheRainBow [/ UTILIZADOR] [UTILIZADOR = 53994] @Swistheater [/ UTILIZADOR] (para Stubby.yml)
As contribuições para este post são bem recebidos
Instale NTPMerlin roteiro AMTM
instale desacoplado
[CITAR]
opkg instalar-controlo independente não ligada-control-setup não ligado
[/CITAR]
Execute desacoplado-control-setup para monitoramento Unbound
[CITAR]
não ligada-controlo-configuração
[/CITAR]
Criar / opt / var / lib / não ligado
[CITAR]
mkdir / opt / var / lib / não ligado
[/CITAR]
Alterar a propriedade diretório para ninguém, no caso de você querer deixar cair privilégios do daemon de raiz para ninguém
[CITAR]
chown ninguém / opt / var / lib / não ligado
[/CITAR]
Editar /opt/etc/unbound/unbound.conf
[Citação] [/ CITAÇÕES] [citação]
servidor:
# Porta para responder a consultas de
porta: 5453
verbosity: 1
fazer-ip4: sim
fazer-ip6: sim
fazer-udp: sim
fazer-tcp: sim
Interface: 0.0.0.0
Interface: :: 0
de controle de acesso: 0.0.0.0/0 lixo
de controle de acesso: 127.0.0.0/8 permitir
access-control: 10.0.30.0/24 allow
# Ensure privacy of local IP ranges
private-address: 192.168.0.0/16
private-address: 169.254.0.0/16
private-address: 172.16.0.0/12
private-address: 10.0.0.0/8
private-address: fd00::/8
private-address: fe80::/10
# no threads and no memory slabs for threads
num-threads: 2
msg-cache-slabs: 4
rrset-cache-slabs: 4
infra-cache-slabs: 4
key-cache-slabs: 4
so-reuseport: yes
# tiny memory cache
key-cache-size: 16m
msg-cache-size: 2m
rrset-cache-size: 2m
cache-max-ttl: 86400
cache-min-ttl: 3600
edns-buffer-size: 1472
cache-max-negative-ttl: 0
# prefetch
prefetch: yes
prefetch-key: yes
minimal-responses: yes
# gentle on recursion
hide-identity: yes
hide-version: yes
do-not-query-localhost: no
qname-minimisation: yes
rrset-roundrobin: yes
harden-glue: yes
val-clean-additional: yes
harden-dnssec-stripped: yes
harden-referral-path: yes
# Self jail Unbound with user "unbound" to /var/lib/unbound
username: "nobody"
directory: "/opt/var/lib/unbound"
chroot: "/opt/var/lib/unbound"
root-hints: "/opt/var/lib/unbound/root.hints"
Code:
# DNSSEC validation
module-config: "validator iterator"
auto-trust-anchor-file: "/opt/var/lib/unbound/root.key"
Code:
forward-zone:
#Local Stubby
name: "."
forward-addr: 127.0.1.1@53
Code:
curl -o /opt/var/lib/unbound/root.hints https://www.internic.net/domain/named.cacheEdit and start unbound daemon
Code:
#!/bin/sh
if [ "$1" = "start" ] || [ "$1" = "restart" ]; then
# Wait for NTP before starting
logger -st "S61unbound" "Waiting for NTP to sync before starting..."
ntptimer=0
while [ "$(nvram get ntp_ready)" = "0" ] && [ "$ntptimer" -lt "300" ]; do
ntptimer=$((ntptimer+1))
sleep 1
done
if [ "$ntptimer" -ge "300" ]; then
logger -st "S61unbound" "NTP failed to sync after 5 minutes - please check immediately!"
echo ""
exit 1
fi
fi
export PATH=/sbin:/bin:/usr/sbin:/usr/bin:$PATH
export TZ=$(cat /etc/TZ)
ENABLED=yes
PROCS=unbound
ARGS="-c /opt/var/lib/unbound/unbound.conf"
PREARGS="nohup"
DESC=$PROCS
PATH=/opt/sbin:/opt/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
. /opt/etc/init.d/rc.funcCreate dnsmasq custom configuration in /jffs/scripts/dnsmasq.postconf:
Code:
#!/bin/sh
if [ "$(nvram get dnspriv_enable)" = "1" ]; then
if [ "$(nvram get ntp_ready)" = "1" ]; then
if [ -f /opt/etc/init.d/S61unbound ]; then
source /usr/sbin/helper.sh
pc_delete "no-negcache" /etc/dnsmasq.conf
pc_delete "no-negcache" /etc/dnsmasq.conf
pc_delete "bogus-priv" /etc/dnsmasq.conf
pc_delete "domain-needed" /etc/dnsmasq.conf
pc_delete "server=127.0.0.1" /tmp/resolv.dnsmasq
pc_delete "server=127.0.0.1#5453" /tmp/resolv.dnsmasq
pc_append "server=127.0.0.1" /tmp/resolv.dnsmasq
pc_append "server=127.0.0.1#5453" /etc/dnsmasq.conf
pc_replace "cache-size=1500" "cache-size=0" /etc/dnsmasq.conf
else
source /usr/sbin/helper.sh
pc_delete "server=127.0.0.1#5453" /tmp/resolv.dnsmasq
pc_delete "server=127.0.0.1" /tmp/resolv.dnsmasq
pc_append "server=127.0.0.1" /tmp/resolv.dnsmasq
fi
fi
fi
if [ "$(nvram get dns_local_cache)" = "1" ]; then
{
NTPSERVERS=""
for VAR in 0 1; do
NTP="$(nvram get "ntp_server$VAR")"
[ -n "$NTP" ] && NTPSERVERS="$NTPSERVERS/$NTP"
done
[ -z "$NTPSERVERS" ] && NTPSERVERS="/pool.ntp.org"
for DNS in $(nvram get wan_dns); do
echo "server=$NTPSERVERS/$DNS"
done
for DNS in $(nvram get ipv6_get_dns); do
echo "server=$NTPSERVERS/$DNS"
done
for VAR in 1 2 3; do
DNS="$(nvram get "ipv6_dns$VAR")"
[ -n "$DNS" ] && echo "server=$NTPSERVERS/$DNS"
done
echo "server=$NTPSERVERS/127.0.1.1"
} >> "$1"
fiStubby valid procedure current FW 384.13.
Configure Stubby for DNSSEC validation:
nano /jffs/configs/stubby.yml.add
Code:
dnssec_return_status: GETDNS_EXTENSION_TRUE
tls_min_version: GETDNS_TLS1_2
tls_cipher_list: "EECDH+AESGCM:EECDH+CHACHA20"
tls_max_version: GETDNS_TLS1_3
tls_ciphersuites: "TLS_AES_128_GCM_SHA256:TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256"chmod +x /jffs/configs/stubby.yml.add
run service restart_stubby
this sets the TZ for accurate sysloging, and nohup allows for commands to be used to verify active listening addresses these different commands can be runned via command line
ps | grep unbound | grep -v grep
netstat -lnptu | grep unbound
netstat -lnpt | grep -E '^Active|^Proto|/unbound'
last thing, I treated this like a headless server situation
i opted to install haveged with
opkg install haveged
then I modified /opt/etc/init.d/S02haveged
nano /opt/etc/init.d/S02haveged
Code:
#!/bin/sh
if [ "$1" = "start" ] || [ "$1" = "restart" ]; then
# Wait for NTP before starting
logger -st "S02haveged" "Waiting for NTP to sync before starting..."
ntptimer=0
while [ "$(nvram get ntp_ready)" = "0" ] && [ "$ntptimer" -lt "300" ]; do
ntptimer=$((ntptimer+1))
sleep 1
done
if [ "$ntptimer" -ge "300" ]; then
logger -st "S02haveged" "NTP failed to sync after 5 minutes - please check immediately!"
echo ""
exit 1
fi
fi
export TZ=$(cat /etc/TZ)
ENABLED=yes
PROCS=haveged
ARGS="-w 1024 -d 32 -i 32 -v 1"
PREARGS=""
DESC = $ PROCS
PATH = / opt / sbin: / opt / bin: / opt / usr / bin: / usr / local / sbin: / usr / local / bin: / usr / sbin: / usr / bin: / sbin: / bin
. /opt/etc/init.d/rc.funcIs it me seeing this in Portuguese or did something change on this post?
Sent from my iPhone using Tapatalk
rgnldo
Very Senior Member
Now I understand why FW Merlin offers the Local cache option, so it is easier to read the clock in cases with DNSSEC or Stubby. I do not use stubby or VPN.
rgnldo
Very Senior Member
For formatting reasons and issues with translator editor, we had to remove the illustrated tips.
https://pastebin.com/raw/YkQ0shvc
Ok, so If I run dig without a port and 127.0.0.1 it shows me my ISP DNS. But when I check dns using a website it shows what I configured in WAN settings (DoT servers) . And when I check dnssec test website they all pass ok. What does it mean?
@rgnldo , with Local Cache =YES, what does is the output when you run
dig snbforums.com +dnssec
and
dig rootcanary.org +dnssec
??
rgnldo
Very Senior Member
Try
Code:
CONFIG=$1
source /usr/sbin/helper.sh
pc_delete "no-negcache" $CONFIG
pc_delete "bogus-priv" $CONFIG
pc_delete "domain-needed" $CONFIG
pc_replace "cache-size=1500" "cache-size=0" $CONFIG
pc_append "server=127.0.0.1#5453" $CONFIG
pc_append "listen-address=127.0.0.1" $CONFIG
pc_append "server=/pool.ntp.org/1.1.1.1" $CONFIGStill no. The solution I tried and is working but I don't know what will happen after restart, I will try later : deleting my ISP servers from /etc/resolv.conf
by adding :
pc_delete "nameserver x.x.x.x" /etc/resolv.conf \\x.x.x.x my isp dns server.
Similar threads
Similar threads
Similar threads
-
-
-
-
-
Help Needed: Configuring OpenVPN Server and Instant Guard on Asus GT-AX11000 with Technicolor CobraXh Modem Router- Started by Sunny786
- Replies: 11
-
Configuring USB-Connected HDD for FTP Sharing via NordVPN Dedicated IP on AC86U- Started by Wobbo
- Replies: 3
Latest threads
-
-
Gt-axe16000 good upgrade from AX-86U?
- Started by Mamba24
- Replies: 0
-
Please add Asuswrt-merlin to GT-BE98 (Non-pro) version
- Started by kaotic2499
- Replies: 3
-
Corrupted router specific partition on AX88U
- Started by nomad_surfer
- Replies: 1
-
Support SNBForums w/ Amazon
If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!
Sign Up For SNBForums Daily Digest
Get an update of what's new every day delivered to your mailbox. Sign up here!