IPTV-without VLAN + Internet-taged VLAN on all LAN ports

[dr.bob]

Hi guys,
my internet provider gives me Internet in Vlan 1505 + IPTV without vlan. I would like to get Internet + IPTV on all 4 LAN ports and also in WiFi. There are many solutions on forums in case if Interenet and IPTV have different Vlans. But in my case I have interent vlan only. When I create vlan 1505 for internet, the IPTV stop working. When I erase vlan 1505, the IPTV work fine but a have not internet. I do not understand why router stop routing multicast after vlan create.

ASUSWRT-Merlin R7000 380.68-4 Sun Jul 16 18:49:41 UTC 2017
admin@R7000:/tmp/home/root# robocfg show
Switch: enabled
Port 0: 1000FD enabled stp: none vlan: 2 jumbo: off mac: cc:............
Port 1: 100FD enabled stp: none vlan: 1 jumbo: off mac: c4:..............
Port 2: DOWN enabled stp: none vlan: 1 jumbo: off mac: 00:00:...........
Port 3: DOWN enabled stp: none vlan: 1 jumbo: off mac: 00:00:...........
Port 4: 1000FD enabled stp: none vlan: 1 jumbo: off mac: 90:............
Port 5: 1000FD enabled stp: none vlan: 2 jumbo: off mac: e4:.............
Port 7: DOWN enabled stp: none vlan: 1 jumbo: off mac: 00:00:...........
Port 8: DOWN enabled stp: none vlan: 1 jumbo: off mac: 00:00:...........
VLANs: BCM5301x enabled mac_check mac_hash
1: vlan1: 1 2 3 4 5t
2: vlan2: 0 5
1505: vlan1505: 0t 5t

Thank you for advice.

 

[ColinTaylor]

Merlin's firmware is not supported on the Netgear R7000. Try asking the person that made the firmware.

 

[dr.bob]

Merlin's firmware is not supported on the Netgear R7000. Try asking the person that made the firmware.

I am using Vortex patch for Merlin's firmware: http://xvtx.ru/xwrt/ and I think this is general Merlin's firmware question not Vortex/R7000 specific.

 

[RMerlin]

I am using Vortex patch for Merlin's firmware: http://xvtx.ru/xwrt/ and I think this is general Merlin's firmware question not Vortex/R7000 specific.

Since a) the code was never designed for that hardware, b) nobody knows what changes Xvortex makes to the code since he refuses to publish his source code, trying to provide support for that unsupported model would be a waste of time. For all we know, the R7000 could be using a different network switch revision than what Asus uses, which would make VLAN management different.

 

[dr.bob]

Since a) the code was never designed for that hardware, b) nobody knows what changes Xvortex makes to the code since he refuses to publish his source code, trying to provide support for that unsupported model would be a waste of time. For all we know, the R7000 could be using a different network switch revision than what Asus uses, which would make VLAN management different.

Thank you for your explanation. Excuse me please for this offtopic.