OPENVPN ASUSWRT AND SIEMENS M800

[benio]

Welcome.

I have UMTS Siemens modem with openvpn function and AC68U router as server.

I corerct establish vpn tunel but i cant ping clinets from server lan to lan clients.

I cant ping end tunel from asus server to 10.8.0.2 and server from Siemens to all lan network behind asus .

I cant ping any lan pc from lan Siemens and i cant ping any pc from lan sus server to lan Siemens.

I try to add otpions in vpn server field push route etc. but still not work.

I spend 2 weaks for this nad no result. I read many posts in this forum but solution not take affect.

its my open vpn export file:
(i remove certificates)



client
dev tun
proto udp
remote its my remote static wan addres 1194
float
cipher AES-256-CBC
auth SHA256
comp-lzo adaptive
keepalive 15 60
ns-cert-type server
resolv-retry infinite
nobind


please help for this issue.......

Best regards

 

[YasharF]

Check the firewall routes, if I recall correctly, I had to manually add some routes in the firewall to get OpenVPN to work. Just a heads up, the OpenVPN performance when running on the router is typically not that good, aka slow connections. I opted to setup a Turnkey OpenVPN on a VM running on a PC on the LAN side and exposing the port through NAT; getting much much better performance.

 

[benio]

Check the firewall routes, if I recall correctly, I had to manually add some routes in the firewall to get OpenVPN to work. Just a heads up, the OpenVPN performance when running on the router is typically not that good, aka slow connections. I opted to setup a Turnkey OpenVPN on a VM running on a PC on the LAN side and exposing the port through NAT; getting much much better performance.

Welcome.

Thanks for reply.

Iknow its not good hardware and solution nut indeed establish 1 connection to plc and hmi in mashine.

I dont have experience.in routing etc. I read forums tutorials i make my actual configuration and i stop on this state. I dont have ideas and more knowledge where and what i must type to this tunel works. I disable firewall but not resolve my problem.

Best regards for You.