What's new

Problem with AC5300 .59

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

dusty459

Occasional Visitor
Right iv been Having intermittent Problems for weeks now

I'm with Virginmedia
I have Had Virgin out they Have Replaced the Super hub 3 The cable running To it everything

Here Is what I see in the Log for Asus
Jun 7 22:16:11 start_nat_rules: apply the nat_rules(/tmp/nat_rules_eth0_eth0)!
Jun 7 22:16:11 wan: finish adding multi routes
Jun 7 22:16:11 rc_service: udhcpc 3469:notify_rc stop_upnp
Jun 7 22:16:11 rc_service: waitting "start_firewall" via udhcpc ...
Jun 7 22:16:12 rc_service: udhcpc 3469:notify_rc start_upnp
Jun 7 22:16:12 rc_service: waitting "stop_upnp" via udhcpc ...
Jun 7 22:16:12 miniupnpd[3468]: shutting down MiniUPnPd
Jun 7 22:16:13 dhcp client: bound 192.168.100.20 via 0.0.0.0 during 20 seconds.
Jun 7 22:16:14 miniupnpd[3500]: HTTP listening on port 50341
Jun 7 22:16:14 miniupnpd[3500]: Listening for NAT-PMP/PCP traffic on port 5351
Jun 7 22:16:29 miniupnpd[3500]: ioctl(s, SIOCGIFADDR, ...): Cannot assign requested address
Jun 7 22:16:29 miniupnpd[3500]: Failed to get IP for interface eth0
Jun 7 22:16:29 miniupnpd[3500]: SendNATPMPPublicAddressChangeNotification: cannot get public IP address, stopping
Jun 7 21:16:29 dnsmasq[917]: read /etc/hosts - 5 addresses
Jun 7 22:16:29 rc_service: udhcpc 3507:notify_rc start_firewall
Jun 7 21:16:29 dnsmasq[917]: read /etc/hosts - 5 addresses
Jun 7 21:16:29 dnsmasq[917]: using nameserver 194.168.8.100#53 for domain cable.virginmedia.net
Jun 7 21:16:29 dnsmasq[917]: using nameserver 194.168.4.100#53 for domain cable.virginmedia.net
Jun 7 21:16:29 dnsmasq[917]: using nameserver 194.168.4.100#53
Jun 7 21:16:29 dnsmasq[917]: using nameserver 194.168.8.100#53
Jun 7 22:16:30 start_nat_rules: apply the nat_rules(/tmp/nat_rules_eth0_eth0)!
Jun 7 22:16:30 wan: finish adding multi routes
Jun 7 22:16:30 rc_service: udhcpc 3507:notify_rc stop_upnp
Jun 7 22:16:30 rc_service: waitting "start_firewall" via udhcpc ...
Jun 7 22:16:31 rc_service: udhcpc 3507:notify_rc start_upnp
Jun 7 22:16:31 rc_service: waitting "stop_upnp" via udhcpc ...
Jun 7 22:16:31 miniupnpd[3500]: shutting down MiniUPnPd
Jun 7 22:16:32 dhcp client: bound 82.30.198.65 via 82.30.196.1 during 424022 seconds.
Jun 7 22:16:33 miniupnpd[3544]: HTTP listening on port 34415
Jun 7 22:16:33 miniupnpd[3544]: Listening for NAT-PMP/PCP traffic on port 5351
Jun 7 21:16:33 WAN Connection: WAN was restored.

Now what is that anyone Help me
 
so I had the Virgin Bloke out he put a Tester super hub 2 back on and took the 3 of So far no drop outs what so ever Looks like there super hub 3 Is full of bugs and I would stay away till the firmware is fixed ect
 

Similar threads

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top