Problems flashing RT-AC87U_378.53_alpha2.trx on my router

[mrdude]

Hi Merlin users, I have just built - RT-AC87U_378.53_alpha2.trx from source 3 times now, even wiped my files and started from from the merlin github.

The image builds successfully - but when I try and flash I get this error:

Firmware upgrade unsuccessful. This may result from incorrect image or error transmission. Please check the version of firmware and try again.

I've not had this error before one previous builds- obviously I'm using an RTAC87U router.

Thanks.

EDIT: IGNORE ABOVE

I was able to flash it using Asus firmware restoration utility, I am using optware so I removed my USB drive, I don't know if that had anything to do with the above, but I'm on 3.78.53 alpha 2 now - so all is good.

 

[binggesoft]

Hello, Can you send me the firmware 378.53 try it
E-mail: shaobing1992@163.com. Thank you

 

[mrdude]

The version I have is a custom build with oscam built in m8 - it open 2 ports on the router and installs oscam to jffs partition - if you enable custom scripts in jffs. If you still want it ill post it, You can remove those scripts from jffs to stop that happening if you want.

 

[binggesoft]

Hello, Can you send me the firmware 378.53 try it
E-mail: shaobing1992@163.com. Thank you

The version I have is a custom build with oscam built in m8 - it open 2 ports on the router and installs oscam to jffs partition - if you enable custom scripts in jffs. If you still want it ill post it, You can remove those scripts from jffs to stop that happening if you want.

 

[mrdude]

Here you go, I have removed oscam from this build: ASUS RT AC87U 0nly.

https://mega.co.nz/#!tgwhjZDJ!THbUw9BCp6Qd3AS3yz1oqNrBNQ3MIRh3om1RyuA7Nx8

Enjoy