Problems wiht USB3-Hub (USB3-Port) on ASUSWRT

[DeeluX]

hey folks

I would like to add two USB3-Harddisks with a USB3-Hub to my USB3-Port on a ASUS-RT-AC87U-Router.
---> all that connected to the USB2-Port will work without any problems. Unfortunately not connectet to the USB3-Port.

Gereral-Log

Apr 5 14:17:36 kernel: xhci_hcd 0000:00:0c.0: WARN: short transfer on control ep
Apr 5 14:17:36 kernel: xhci_hcd 0000:00:0c.0: WARN: short transfer on control ep
Apr 5 14:17:36 kernel: xhci_hcd 0000:00:0c.0: WARN: short transfer on control ep
Apr 5 14:17:36 kernel: usb 1-1: ep 0x83 - rounding interval to 128 microframes
Apr 5 14:17:36 kernel: xhci_hcd 0000:00:0c.0: WARN no SS endpoint bMaxBurst
Apr 5 14:17:36 kernel: xhci_hcd 0000:00:0c.0: WARN: short transfer on control ep
Apr 5 14:17:36 kernel: xhci_hcd 0000:00:0c.0: WARN: Stalled endpoint
Apr 5 14:17:36 kernel: xhci_hcd 0000:00:0c.0: WARN: Stalled endpoint
Apr 5 14:17:36 kernel: xhci_hcd 0000:00:0c.0: WARN: Stalled endpoint
Apr 5 14:17:36 kernel: hub 1-1:1.0: config failed, can't read hub descriptor (err -22)

Is there anything that i can do to fix that?

 

[mattiL]

Try the option "Reducing USB 3.0 Interference" (Wireless>>Professional>>2.4GHz)

 

[john9527]

USB3 hubs aren't officially supported. Sometimes they will be detected and run USB2 mode, others will not be detected properly as you have seen. There have been a few posts where some people claim to have found a USB3 hub that works, but even those are hit and miss (mostly miss).
The setting from @mattiL may get it to be detected as a USB2 hub, but your disks will run as USB2.

 

[Rankdropper84]

My 5TB external drive gets the same codes in my routers log when i connect it although it will still connect. I haven't been able to find a working 3.0 hub that will work on my AC68U's 3.0 port but both of my usb 3.0 hubs work perfect when connected to the 2.0 port.