Anyone knows how to get rid of the yellow blinking exclamation mark?
Can't get rid of the FTP change message here either. Cosmetic but annoying. On Alpha 7 on AC68U
Go to the FTP tab, set it to share without account, apply, then set it back to only share with account, and apply.
Go to the FTP tab, set it to share without account, apply, then set it back to only share with account, and apply.
Can anyone tell me if this new firmware enables DFS und the higher channels on the 5 GHz band? I'd like to uses channels 52 and above, since my neighbour is using channels 36 - 48, too.
With firmwares 3.0.0.4.374.4422 and ...4561 for the AC68 DFS is realised, but in the release notes for these new firmwares of the AC66 this isn't mentioned.
Flashed to Alpha4 on my AC66u and now I am getting the blinking exclamation mark warning me about setting my samba share to "share with account" Problem with this is Windows will only let me map individual folders on my USB drive vs being allowed to map the entire drive when it was set as "share without account". NOt really concerned with other family members accessing my samba share, are there any other risks associated with leaving as "Share without account"?
Are you sure it's referring to Samba and not FTP?
If it's really Samba, then any potential issue would be merely on your LAN, and when logged through AiCloud. The router is just warning you that anyone with access to your LAN can access to the shared content, in case that was not what you really wanted.
Its definitely referencing Samba, don't have FTP enabled. When I set Samba to "Share with account" the blinking exclamation mark goes away.
Welcome To SNBForums
SNBForums is a community for anyone who wants to learn about or discuss the latest in wireless routers, network storage and the ins and outs of building and maintaining a small network.
If you'd like to post a question, simply register and have at it!
While you're at it, please check out SmallNetBuilder for product reviews and our famous Router Charts, Ranker and plenty more!