RT-AX55 log looping. No Wifi clients can connect

[Shuffling6544]

Hello. I have been having problems with occasional disconnect of all wifi clients. Today when it happened again, and after the router was rebooted with the external button, I was able to inspect the log from the GUI interface. The following log shows an endless loop of messages for a few second of log. Attached is the log txt which continues for 1 hour before router was rebooted.

RT-AX55 Primary Node Firmware Version 3.0.0.4.386_52303 - separately named 2.4 and 5GHz after disabling Smart Connect to help diagnos this issue.
- 2.4Ghz WPA/WPA2 AES
- 5GHz WPA2/WPA3 AES

RT-AC66U B1 Node #1 Firmware Version 3.0.0.4.386_51685 - backhaul wifi auto
RT-AC66U B1 Node #2 Firmware Version 3.0.0.4.386_51685 - backhual wifi auto

Thanks.

Sep 27 09:34:20 kernel: ADD/SET beacon failed
Sep 27 09:34:25 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Sep 27 09:34:25 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Sep 27 09:34:25 kernel: CSIMON: M2M usr already registered ...
Sep 27 09:34:25 kernel: In wl_dfs_cac_notify_status chanspec 0x1903 DFS state 0
Sep 27 09:34:25 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Sep 27 09:34:25 kernel: CSIMON: M2M usr already registered ...
Sep 27 09:34:25 kernel: Set wpa_cap for preauth error -1
Sep 27 09:34:25 kernel: Beacon set security failed
Sep 27 09:34:25 kernel: ADD/SET beacon failed
Sep 27 09:34:25 kernel: Set wpa_cap for preauth error -1
Sep 27 09:34:25 kernel: Beacon set security failed
Sep 27 09:34:25 kernel: ADD/SET beacon failed
Sep 27 09:34:30 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Sep 27 09:34:30 kernel: CSIMON: M2M usr already registered ...
Sep 27 09:34:30 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Sep 27 09:34:30 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Sep 27 09:34:30 kernel: CSIMON: M2M usr already registered ...
Sep 27 09:34:30 kernel: In wl_dfs_cac_notify_status chanspec 0x1903 DFS state 0
Sep 27 09:34:30 kernel: Set wpa_cap for preauth error -1
Sep 27 09:34:30 kernel: Beacon set security failed
Sep 27 09:34:30 kernel: ADD/SET beacon failed
Sep 27 09:34:30 kernel: Set wpa_cap for preauth error -1
Sep 27 09:34:30 kernel: Beacon set security failed
Sep 27 09:34:30 kernel: ADD/SET beacon failed
Sep 27 09:34:36 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Sep 27 09:34:36 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Sep 27 09:34:36 kernel: CSIMON: M2M usr already registered ...
Sep 27 09:34:36 kernel: In wl_dfs_cac_notify_status chanspec 0x1903 DFS state 0
Sep 27 09:34:36 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Sep 27 09:34:36 kernel: CSIMON: M2M usr already registered ...
Sep 27 09:34:36 kernel: Set wpa_cap for preauth error -1
Sep 27 09:34:36 kernel: Beacon set security failed
Sep 27 09:34:36 kernel: ADD/SET beacon failed
Sep 27 09:34:36 kernel: Set wpa_cap for preauth error -1
Sep 27 09:34:36 kernel: Beacon set security failed
Sep 27 09:34:36 kernel: ADD/SET beacon failed

 

[beachmiles]

I'm getting very similar looping messages on my zenwifi Et9 3 nodes system and some of my devices were not connecting. Rebooting this POS yet again. Fairly sure I'll be returning this system as it's been nothing but trouble.

Jan 22 08:05:16 kernel: Beacon set security failed
Jan 22 08:05:16 kernel: ADD/SET beacon failed
Jan 22 08:05:21 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Jan 22 08:05:21 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Jan 22 08:05:21 kernel: CSIMON: M2M usr already registered ...
Jan 22 08:05:21 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
Jan 22 08:05:21 kernel: In wl_dfs_cac_notify_status chanspec 0x682f DFS state 0
Jan 22 08:05:21 kernel: ndev(eth4) 8951de5d not found
Jan 22 08:05:21 kernel: wl_probe_wdev_all: net_list[0] bssidx: 1, ifidx: 1 ndev(wl0.1): d5378bfb, wdev: 8b8b4137 wdev->netdev(wl0.1): d5378bfb
Jan 22 08:05:21 kernel: wl_probe_wdev_all: net_list[1] bssidx: 0, ifidx: 0 ndev(): a78887c7, wdev: 6bf1630d wdev->netdev(eth4): 8951de5d
Jan 22 08:05:21 kernel: Set wpa_cap for preauth error -1
Jan 22 08:05:21 kernel: Beacon set security failed
Jan 22 08:05:21 kernel: ADD/SET beacon failed
Jan 22 08:05:21 kernel: Set wpa_cap for preauth error -1
Jan 22 08:05:21 kernel: Beacon set security failed
Jan 22 08:05:21 kernel: ADD/SET beacon failed
Jan 22 08:05:26 kernel: In wl_dfs_cac_notify_status chanspec 0x682f DFS state 0
Jan 22 08:05:26 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Jan 22 08:05:26 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Jan 22 08:05:26 kernel: CSIMON: M2M usr already registered ...
Jan 22 08:05:26 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
Jan 22 08:05:26 kernel: Set wpa_cap for preauth error -1
Jan 22 08:05:26 kernel: Beacon set security failed
Jan 22 08:05:26 kernel: ADD/SET beacon failed
Jan 22 08:05:26 kernel: ndev(eth4) 8951de5d not found

 

[PAPPL]

Same s*it with RT-AXE7800 even with newest firmware.

 

[sfx2000]

Try setting both radios to WPA2 (not mixed either with WPA or WPA3)

 

[PAPPL]

Hi, yesterday i reenabled "Roaming Assistant" in Wireless - Professional settings.
In addition 5Ghz band to 80Mhz only.
No SmartConnect enabled.

No Beacon errors anymore.

I'll leave WPA2&WPA3 enabled, don't touch a running system.
There seems to be a bug with Roaming Assistant, because i don't have another router and no errors when i enable it.

Update: Still random router reboots.