janico82
Regular Contributor
Thank's @visortgw! sbnMerlin client lists pretends to extend the Network Map because it didn't show devices connected to other bridges than br0. So the function for listing clients is based on the mac addresses of the arp table, then for each mac address the script checks the connected wireless interface and finally the list is completed with information of dns.I just installed v1.2.1. Thank you for adding bridge DNS servers! I currently only have guest network 1 enabled with separate SSIDs, both isolated.
Code:#### Settings for Bridge 1 #### br1_enabled=0 br1_ifnames="" br1_dns1_x="8.8.8.8" br1_dns2_x="8.8.4.4" br1_staticlist="" br1_ap_isolate=1 br1_allow_internet=1 br1_allow_onewayaccess=0 br1_allow_routeraccess=0 #### Settings for Bridge 2 #### br2_enabled=0 br2_ifnames="" br2_dns1_x="8.8.8.8" br2_dns2_x="8.8.4.4" br2_staticlist="" br2_ap_isolate=1 br2_allow_internet=1 br2_allow_onewayaccess=0 br2_allow_routeraccess=0
I believe that there are some issues with the client list generated by sbnMerlin:
- There are missing clients as compared to Network Map client list in router web UI.
- I don't understand why interfaces are listed as "ethernet" instead of "wl0.1" or "wl1.1" for some clients.
Code:bridge name interfaces client IP address client MAC address client name br1 wl0.1 192.168.101.197 xx:xx:xx:xx:20:28 AWAIR-ELEM-xx2028 br1 wl0.1 192.168.101.237 xx:xx:xx:xx:D8:01 WYZE_CAKP2JFUS-xxxxxxxxD801 br1 wl0.1 192.168.101.114 xx:xx:xx:xx:C0:C1 WYZE_CAKP2JFUS-xxxxxxxxC0C1 br1 wl0.1 192.168.101.138 xx:xx:xx:xx:61:D0 WYZE_CAM_OG br1 wl0.1 192.168.101.176 xx:xx:xx:xx:DA:32 ESP_xxDA32 br1 wl0.1 192.168.101.187 xx:xx:xx:xx:F4:72 ESP_xxF472 br1 wl0.1 192.168.101.93 xx:xx:xx:xx:D2:00 ESP_AxxD200 br1 wl0.1 192.168.101.161 xx:xx:xx:xx:F1:0C net_a1_F10C br1 wl0.1 192.168.101.86 xx:xx:xx:xx:D8:7A DA16600_D87A br1 ethernet 192.168.101.215 xx:xx:xx:xx:F0:7C Indoorcam br1 ethernet 192.168.101.84 xx:xx:xx:xx:8C:4C espressif br1 ethernet 192.168.101.144 xx:xx:xx:xx:A8:E9 192.168.101.144 br1 ethernet 192.168.101.52 xx:xx:xx:xx:56:D5 WYZE_CAKP2JFUS-xxxxxxxx56D5 br1 ethernet 192.168.101.13 xx:xx:xx:xx:4F:E2 HL_PAN3-xxxxxxxx4FE2 br1 ethernet 192.168.101.99 xx:xx:xx:xx:DE:8C ESP_xxDE8C br1 ethernet 192.168.101.7 xx:xx:xx:xx:A5:0C XL824-xxxxxx br1 ethernet 192.168.101.79 xx:xx:xx:xx:07:DA 192.168.101.79 br1 ethernet 192.168.101.26 xx:xx:xx:xx:67:EB 192.168.101.26 br1 ethernet 192.168.101.8 xx:xx:xx:xx:32:F5 192.168.101.8 br1 ethernet 192.168.101.9 xx:xx:xx:xx:B3:AF WYZE_CAKP2JFUS-xxxxxxxxB3AF br1 ethernet 192.168.101.173 xx:xx:xx:xx:F6:53 MyQ-91E br1 ethernet 192.168.101.233 xx:xx:xx:xx:B8:28 WYZE_CAKP2JFUS-xxxxxxxxB828 br1 ethernet 192.168.101.10 xx:xx:xx:xx:46:F0 ChimePro-f0 br1 ethernet 192.168.101.213 xx:xx:xx:xx:07:5E 192.168.101.213 br1 ethernet 192.168.101.43 xx:xx:xx:xx:CD:85 WYZE_CAKP2JFUS-xxxxxxxxCD85 br1 ethernet 192.168.101.95 xx:xx:xx:xx:50:B6 WYZE_CAKP2JFUS-xxxxxxxx50B6 br1 ethernet 192.168.101.241 xx:xx:xx:xx:90:86 192.168.101.241 br1 ethernet 192.168.101.71 xx:xx:xx:xx:42:05 ChimePro-05 br2 wl1.1 192.168.102.110 xx:xx:xx:xx:F8:C2 192.168.102.110
So for the list you've sent, the script didn't find the wireless interface the devices are connected. Can you send me privately the arp table? This device uses AiMesh?