What's new

UDP VPN Port

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

wbennett77

Regular Contributor
What would be a safe port range to use instead of the default 1194 for UDP?
 
The total range of available ports is 0-65535. If you avoid the well-known port range (0-1023) and ephemeral port range (in my case, 32768-61000), you should be fine. But you can still encounter weird exceptions (e.g., browsers block port 10080 due to the NAT slipstream attack). But as a general rule, I stick w/ the 10000-29999 range for my own port usage.

P.S. The ephemeral port range can vary from OS to OS. In the case of Merlin, you can find it w/ the following command.

Code:
cat /proc/sys/net/ipv4/ip_local_port_range
 
Last edited:
What would be a safe port range to use instead of the default 1194 for UDP?
Two things to note.
Technically, 1194 isn't a "range", it's a single port :)

"Safe" is not the correct word. Even "safer" doesn't necessarily apply. For obvious reasons, opening **ANY** port puts your systems at *some* risk. Even VPN software can have vulnerabilities. You didn't specify what you are running or on what device.

Using "non-traditional" ports for any service perhaps mitigates the likelihood of an attack, but doesn't prevent one completely. Any good hacker that was determined to get into your system wouldn't care if you use a traditional port or not, they would sweep all ports with their attack vector. Using a non-traditional port does prevent attacks from lazy hackers.

It is a good idea to use non-traditional ports where possible, and to severely limit the number of services (and therefore the number of open ports), but it is arguably more important to keep your software up to date and patched and run reliable apps.

:)
 
When configuring a UDP port for use with a virtual private network (VPN), it is important to use a port that falls within a safe range. By default, 1194 is used for UDP, but this can be changed depending on your needs. A safe port range to use instead of 1194 would be any ports between 10000 and 65535. This range will help ensure that your VPN connection remains secure and uninterrupted.
 

Similar threads

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top