Hello all,
This is my first post on SNB.
A month ago I bought an RT-AX58U (I discovered it has V2 labeled on the back ,after reading other threads for my problem).
As the title states: I am not able to flash my firmware to Merlin.
I searched for answers in other similar threads, but this was always a dead end.
What I did:
Laptop connected to the 58U wired to port 2. (several wireless devices connected, no wired devices) I don't use the USB port at all.
I was on original Asus firmware: 3.0.0.4.386_45518-g904e564 according to firmware page
Unpacked and selected Merlin firmware: RT-AX58U_386.4_0_cferom_puresqubi.w
It goes in to updating mode for several minutes. After a while I revert back to the screen to login again.
Firmware version still reads 3.0.0.4.386_45518
I execute a reboot and after that an factory reset with the checkbox marked to clear settings.
Setup the router with the same SSID name and router login details.
Reboot
Firmware version still reads 3.0.0.4.386_45518
I tried other Merlin version with the same result. (Merlin RT-AX58U_386.3_2)
Then I downloaded the latest firmware version from Asus site: 3.0.0.4.386.47029
I redo the same procedure as above with other firmware's, to check if I did something wrong.
After updating, I login and it states the new firmware version: 3.0.0.4.386.47029, so flashing was successful.
I execute a reboot, factory reset, setup the router again and a reboot.
Now I try Merlin RT-AX58U_386.4_0 again.
But after pressing update I get the popup "Applying settings". This goes away and I get a new popup: Invalid Firmware Upload
This also happens with Merlin RT-AX58U_386.3_2 and Merlin RT-AX58U_386.4_beta3 and Asus 3.0.0.4.386.45898 (Only this older version is available on the Asus webpage)
I reboot by unplugging power supply cable.
So what did I wrong in the first place and how to fix that?
Why am I not able to revert to an older Asus firmware and how to fix this?
This is my first post on SNB.
A month ago I bought an RT-AX58U (I discovered it has V2 labeled on the back ,after reading other threads for my problem).
As the title states: I am not able to flash my firmware to Merlin.
I searched for answers in other similar threads, but this was always a dead end.
What I did:
Laptop connected to the 58U wired to port 2. (several wireless devices connected, no wired devices) I don't use the USB port at all.
I was on original Asus firmware: 3.0.0.4.386_45518-g904e564 according to firmware page
Unpacked and selected Merlin firmware: RT-AX58U_386.4_0_cferom_puresqubi.w
It goes in to updating mode for several minutes. After a while I revert back to the screen to login again.
Firmware version still reads 3.0.0.4.386_45518
I execute a reboot and after that an factory reset with the checkbox marked to clear settings.
Setup the router with the same SSID name and router login details.
Reboot
Firmware version still reads 3.0.0.4.386_45518
I tried other Merlin version with the same result. (Merlin RT-AX58U_386.3_2)
Then I downloaded the latest firmware version from Asus site: 3.0.0.4.386.47029
I redo the same procedure as above with other firmware's, to check if I did something wrong.
After updating, I login and it states the new firmware version: 3.0.0.4.386.47029, so flashing was successful.
I execute a reboot, factory reset, setup the router again and a reboot.
Now I try Merlin RT-AX58U_386.4_0 again.
But after pressing update I get the popup "Applying settings". This goes away and I get a new popup: Invalid Firmware Upload
This also happens with Merlin RT-AX58U_386.3_2 and Merlin RT-AX58U_386.4_beta3 and Asus 3.0.0.4.386.45898 (Only this older version is available on the Asus webpage)
I reboot by unplugging power supply cable.
So what did I wrong in the first place and how to fix that?
Why am I not able to revert to an older Asus firmware and how to fix this?