What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Search results

  1. N

    UPS to protect ONT, router?

    Any recommendations on a good UPS that isn’t overkill for use with an ONT, router, hub in my basement to protect against power outages due to storms, etc?
  2. N

    When you FA, you FO. I did.

    I know this is anecdotal but started off with 3 AX88U routers in a mesh (router with 2 nodes). They were tweaked based on suggestions found on this forum with the understanding that every environment is different. I have a 1.5Gb fiber connection but never seemed to ever get full connection...
  3. N

    Fewer mesh nodes = better client performance?

    Had 3 AX88U Pro units in a mesh (main router and 2 nodes) in my 3 story house of approximately 5600 sq ft. One unit on each level. The first floor unit died and I removed it from the mesh and to my surprise it seems like some devices are using weaker signal but the overall performance is...
  4. N

    Smart Connect rule steering values. Please explain.

    OK, I will admit what I'm about to ask may seem dumb to some. That's fine. I called Asus Support and asked them, and the experience may have been the worst I've ever experienced. It was like the guy who barely spoke English was answering questions I didn't ask and ignoring the ones I did ask...
  5. N

    Release schedule for firmware?

    The last release of firmware for the AX88U Pro was mid January, almost 6 months ago. Does Asus have a standard release schedule for firmware, or do they just drop new versions randomly when they get to it? I assume CVEs and security fixes play a role in release, but is there a standard cadence?
  6. N

    AIMesh node vs Access Point mode / AIMesh Router in AP mode

    Can someone provide a link to an article or post (I’ve looked) or give an explanation of the technical difference between these settings? I have 3 routers connected in a mesh with Ethernet Backhaul Mode set. Having some possible issues and thought about setting up as AIMesh in AP mode but...
  7. N

    1.5Gb fiber connection with 3 mesh nodes. Clients getting ~500Mbps. Setting or nature of AIMesh?

    3 node AIMesh RT-AX88U Pro using wired backhaul with 2.5Gb ports through 2.5Gb switch (link status shows 2.5Gb). FTTH connection is 1.5Gbps. Using Smart Connect and the wireless log shows on the router shows 160M connections on 5GHz with 2Gb or better port speeds, yet speed tests through the...
  8. N

    AI Mesh using switch?

    Any issue using a switch to connect wired backhaul from router to 2 mesh nodes?
  9. N

    What firmware for AI Mesh

    Planning to setup a multi node mesh. Which is the better choice, the stock Asus firmware or Merlin?
  10. N

    AI Mesh with 2.5Gb backhaul?

    Have a AX-86U and AX-88U, and considering buying a AX-88U Pro because it has two 2.5Gb ports. The question I have is can one of the 2.5Gb ports be used for the WAN connection to the ONT, and the 2nd 2.5Gb port be used to connect a wired AI Mesh backhaul to the AX-88U? Would this work or are...
  11. N

    3 story house approx 5K sq ft with limited ethernet wiring

    Hi everyone, I've looked over the other threads and while I took away bits and pieces, I wanted to ask my specific question here for a specific answer. We are buying a home that has a finished basement, a main level, and a 2nd story. Total area for all three floors is approximately 5K sq ft...
  12. N

    "Anonymous" device name and log entries. Being hacked?

    I noticed in the Asus app that there's an offline device named "Anonymous" in the devices list. There's no IP info and the MAC address doesn't match any known devices. The following shows up in the router log and shows the device is authenticating successfully but then dropping after 24...
  13. N

    AX86U to replace AX88U

    Is that a stupid move? Not enough reason to spend $270 with tax to upgrade? The main reason is for the 2.5Gb WAN port to connect to the Arris S33 cable modem 2.5Gb port. My connection from my ISP is 1.2Gbps and May increase to 2Gbps later in the year.
  14. N

    Recommended config for 160 MHz with WiFi 6 and AX88U

    I just upgraded to the latest stock Asus firmware, have a 2GB pipe to my cable modem via WAN aggregation, and now I can realize my full Internet bandwidth with 802.11ax. With my Comcast gigabit DOCSIS connection, I'm getting the fully provisioned 1.2Gbps to my WiFi 6 clients. Currently, I have...
  15. N

    WPA2-Personal vs WPA2/WPA3 Personal

    Been searching and trying to find clarity around those two network security settings. I have mostly modern devices with OS's that support WPA3, but some older devices and IOT devices that may/do not. Does the WPA2/WPA3 Personal in the Asuswrt wireless settings provide WPA3 for devices that...
  16. N

    AX88U channel bandwidth setting

    Can anyone please explain what the difference is between 20/40/80 MHz and setting to 80 MHz? Wireless mode is set to “Auto” for the 5 GHz network, and all of the devices are WiFi 5 or 6 capable. So is there really any practical difference between the 2 channel bandwidth settings? Is one...
  17. N

    AX88U "protocol 0000 is buggy" error over and over

    AX88U running 384.19. Enabled WAN aggregation today and that seems to be working fine. Have a 2GB bonded connection to my modem and performance is fine. Issue is now I see the following error over and over in the system log: "kernel: protocol 0000 is buggy, dev eth1" What is this?????
  18. N

    Troubleshoot WAN Aggregation?

    Have an AX88U running 384.19. My ISP is Comcast and my WAN connection is to a DOCSIS 3.1 EMTA (Arris T25) which supports two cables connections (1Gb) to a router. I can see both ports enabled on the EMTA and running at 1Gb. If I enable WAN aggregation on the router, it enables and I can see...
  19. N

    WAN aggregation with 384.19 and AX88U

    Have a gigabit cable connection through Comcast, which I'm told they usually overprovision by 10-20%. The cable modem has two 1Gb ethernet ports that can be setup for aggregation. I'm using Cat 5e certified cables, and when I setup the AX88U for WAN aggregation (with 384.19) and connect the...
  20. N

    Merlin or stock firmware?

    I've been using Merlin's firmware for about 10 years through various models of Asus router. My requirements for a router are very minimal and simple. I don't use VPN, or QoS, or any advanced features. I may setup an AIMesh with two routers, but that's as complicated as my use cases get. I...
Back
Top
✖