Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. Gary_Dexter

    VLAN Question

    If I were to use the base ASUS firmware (with VLAN’s etc.) is there a way out of the box to allow, for example, devices from the IOT network/VLAN to not have access to the main LAN, but allow devices in the main LAN to communicate with devices in the IOT network/VLAN (I.e one similar to 1-way to...
  2. Gary_Dexter

    Blocking “RO” country code in Skynet blocks Proton VPN UK connections

    Hi, But of a bizarre one - blocking the RO country code doesn’t allow the Proton VPN client on mobile/PC to connect to any UK endpoints - connections to other countries appear to work fine, but UK ones are blocked. Removing RO from the list of blocked countries in Skynet fixes the issue and...
  3. Gary_Dexter

    YazFi Allow client in isolated network to speak to main network

    Hi I have YazFi setup to segregate my IoT devices onto their own network. This network is also set to allow one-way traffic TO the guest network (but not both ways). I’ve added a Sonos device to this IoT network, however I would like it to have communication back to the main network as well so...
  4. Gary_Dexter

    Custom WAN DNS not working

    Setting my WAN DNS to Custom and choosing Quad9 doesn’t seem to work and DNS stays as ISP’s DNS (as shown in the GUI on the Network Map and using nslookup - WAN DNS page states it’s “using” Quad9). Is this a known bug? GT-AC2900 running Merlin 386.12
  5. Gary_Dexter

    amtm Segmentation Fault in AMTM

    Hi, Recently I've been getting Segmentation Faults in AMTM: Everything is still working add-on wise - Skynet, YazFi etc. all still working. Rebooting makes the issue go away and AMTM loads correctly. but after an undisclosed amount of time, checking AMTM again shows the errors. Do I need...
  6. Gary_Dexter

    YazFi YazFi - All Clients Disconnect

    I have a recurring issue whereby clients connected to YazFi all disconnect and have no internet access. Devices are not listed as connected on the YazFi status page, shows no clients connected - the SSID is still broadcasting but new (or existing) devices cannot connect to it. The only way to...
  7. Gary_Dexter

    YazFi AdGuard Home on Raspberry Pi and YazFi

    I've setup AGH on a Raspberry Pi - everything works well with the LAN DNS pointed to the IP Address of the RPi with AGH. However, when I change my YazFi DNS to the IP of the RPi/AGH, the clients do not get any DNS connectivity and lose internet connection - this is to a range of IoT etc...
  8. Gary_Dexter

    Tracking down device still using router DNS

    Hi, I've recently deployed AdGuard Home on my network via a newly acquired Raspberry Pi. This is working correctly and I can see devices (by IP and/or hostname) in the Query Log in AGH. However, there appears to be one rogue device that is using the routers DNS server rather than the AGH DNS...
  9. Gary_Dexter

    Using AdGuard Home with Unbound

    Any advantages to doing this? How would it work with regards to filtering - will requests go to AGH first before being pushed to the “outside world” for blocklist checking etc? And is there any benefit to Unbound over AGH’s DNS caching?
  10. Gary_Dexter

    YazFi YazFi - allow communication between 2.4ghz and 5ghz networks?

    I’ve setup a guest network for IoT devices and the like using YazFi on Slot 2 on both the 2.4ghz and 5ghz band, using the same SSID and Password for both, different IP ranges and “one way to guest” for both as I don’t want devices to communicate out to the “standard LAN”, but allow the “standard...
  11. Gary_Dexter

    Diversion Use "Ticked Lists" from Firebog in Diversion?

    Is there a way to set Diversion to use the "ticked lists" available on Firebog? https://v.firebog.net/hosts/lists.php?type=tick
  12. Gary_Dexter

    VPN "Client" Speeds

    What are the "expected" speeds when connected to a VPN Client on a GT-AC2900? For example, I am connected to a NordVPN UK Server, from the UK myself, and I am seeing speeds over wifi of 400-500Mbps up and down (I am on a 1GB symmetrical line). I thought the theoretical max speeds would be...
  13. Gary_Dexter

    Using own domain with DNS-O-Matic

    I have a domain with Cloudflare and I want to use it for DDNS - I understand I can do this with DNS-O-Matic. I’ve added the domain to DOM, however it’s been stuck on “waiting first update” for hours and not progressing. Can someone confirm the A and CNAME records I need to enter on the DNS...
  14. Gary_Dexter

    OpenVPN Client and DoT DNS

    Hi, Currently using NordVPN as OpenVPN client, and using VPN Director to route all LAN traffic over the VPN. DNS is also set to Exclusive in the OVPN Client settings. Traffic is routed out the VPN as expected (confirmed by doing IP check), however DNS Leak Tests show that DNS is coming from...
  15. Gary_Dexter

    OpenVPN and accessing LAN devices

    Hi, Is there a way I can be connected to my OpenVPN Server but also access devices on the LAN? For example I have a Sky Q set top box that, when on the LAN, I can access and view the recordings saved to the box via the Sky Go app in my iPhone/iPad. If I go “off-net” and connect to my OpenVPN...
  16. Gary_Dexter

    “New” ASUS 2022 Features

    Please move if not in the right place - but saw this page is now being advertised by ASUS showcasing the “new” features coming in 2022. Will @RMerlin also be supporting these? https://routerkb.asuscomm.com/?page_id=9
  17. Gary_Dexter

    Native IPv6 - no LAN IP's populating

    GT-AC900 running Merlin 386.5_2. Choosing Native IPv6 yields no LAN IP's, and IPv6 tests fail (not surprisingly). However if I use Passthrough, I get IPv6 connectivity, albeit /0 addresses/prefixes on the status page, and the connection type shows as Disabled, but IPv6 tests pass and show...
  18. Gary_Dexter

    OpenDNS now supports DoT - tested and working on Merlin!

    Cisco Umbrella has recently announced that OpenDNS (and Umbrella) now supports DoT using the standard DNS servers and host names. I’ve tested this on my AC2900 running Merlin 386.5 and can confirm it’s working as expected. Now if only they would add the option to enforce Safe Search on search...
  19. Gary_Dexter

    386.5 - Admin Page not accessible

    Following an upgrade to 386.5, the admin page on my router (GT-AC2900) becomes inaccessible until I restart the router. It then works for anywhere between 1-12 or so hours, then becomes inaccessible again until the router is rebooted, and the cycle continues. This has only happened since...
Top