RT-AC86U CPU and radio temperature commands?

[maxbraketorque]

The commands that worked for my RT-AC68U and RT-AC3100

• CPU temperature: cat /proc/dmu/temperature
• Radio 1: wl -i eth1 phy_tempsense
• Radio 2: wl -i eth2 phy_tempsense

are not working for the RT-AC86U. Anyone know the new commands for the RT-AC86U?

 

[sfx2000]

Different SDK/BSP from the earlier devices.

One can dig around /sys/class/thermal

see what shows up.

 

[maxbraketorque]

Different SDK/BSP from the earlier devices.

One can dig around /sys/class/thermal

see what shows up.

Thanks. Nothing informative there. I'll look around a bit more.

 

[RMerlin]

For the CPU, you need to have a recent enough firmware that has the bcm_thermal kernel module (it wasn't included in earlier firmware releases).. It will be available in /sys/class/thermal/thermal_zone0/temp .

For wifi, I only know how to query it through the API, no idea if it's available from userspace using wl or dhd, sorry.

 

[maxbraketorque]

For the CPU, you need to have a recent enough firmware that has the bcm_thermal kernel module (it wasn't included in earlier firmware releases).. It will be available in /sys/class/thermal/thermal_zone0/temp .

For wifi, I only know how to query it through the API, no idea if it's available from userspace using wl or dhd, sorry.

Thanks. Its a passing curiosity at this point, so I'm not going to try to dig further for now. Maybe you'll eventually add it to your firmware?

 

[RMerlin]

Thanks. Its a passing curiosity at this point, so I'm not going to try to dig further for now. Maybe you'll eventually add it to your firmware?

It's already there, on the Tools -> Sysinfo page.

 

[maxbraketorque]

It's already there, on the Tools -> Sysinfo page.

Ah. Cool. Guess you can see that I have not used one of your custom firmwares before.

 

[lostindark]

Ah. Cool. Guess you can see that I have not used one of your custom firmwares before.

Hi,
Can you tell me your temperature of wifi and processor?

Best Regards,

 

[maxbraketorque]

Hi,
Can you tell me your temperature of wifi and processor?

Best Regards,

I'm still not using a Merlin firmware, so I don't know.

 

[lostindark]

I'm still not using a Merlin firmware, so I don't know.

Thanks..

Sent from my SM-G930F using Tapatalk

 

[doczenith1]

My 86U values are:
Temperatures 2.4 GHz: 52°C - 5 GHz: 57°C - CPU: 75°C
The ambient temperature is 68°F and there is minimal load on the router.

 

[lostindark]

My 86U values are:
Temperatures 2.4 GHz: 52°C - 5 GHz: 57°C - CPU: 75°C
The ambient temperature is 68°F and there is minimal load on the router.

Thanks , it looks normal..

 

[lostindark]

My 86U values are:
Temperatures 2.4 GHz: 52°C - 5 GHz: 57°C - CPU: 75°C
The ambient temperature is 68°F and there is minimal load on the router.

Hi, can you tell me is there a error for usb hub in the initial log like this:

kernel: ++++ Powering up USB blocks
Feb 14 02:00:17 kernel: usb3 reseting..........
Feb 14 02:00:17 kernel: release usb3 reseting..........
Feb 14 02:00:17 kernel: hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 14 02:00:17 kernel: usb3 reseting..........

When I reboot my router and I see this error at the beginnng.. can you check is it the same in your log?

Thanks for help...

 

[doczenith1]

Hi, can you tell me is there a error for usb hub in the initial log like this:

kernel: ++++ Powering up USB blocks
Feb 14 02:00:17 kernel: usb3 reseting..........
Feb 14 02:00:17 kernel: release usb3 reseting..........
Feb 14 02:00:17 kernel: hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 14 02:00:17 kernel: usb3 reseting..........

When I reboot my router and I see this error at the beginnng.. can you check is it the same in your log?

Thanks for help...

This is above my pay grade. Someone else will have to assist you with this.