Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. N

    Guest Network not working in Firmware 386.2_2

    Thanks - I’ll raise it with Asus although I guess it is likely they will want me to revert to the standard firmware to see if still an issue - meaning downtime as I don’t have a spare RT-AC86U to confirm this with. It would be useful to see whether others have this issue (whether or not AC86u...
  2. N

    Guest Network not working in Firmware 386.2_2

    Here is the brctl show output: admin@RT-AC86U:/tmp/home/root# brctl show bridge name bridge id STP enabled interfaces br0 8000.04d9f5927758 yes eth2 eth3...
  3. N

    Guest Network not working in Firmware 386.2_2

    How would I find the VLAN ID of IPTV? I checked the LAN->IPTV tab and this just indicates the Profile Name of “Unifi-Home”? here are the MAC addresses in the ifconfig output for brX and wlX.Y - As you can see br0 and br1 share the same MAC (which is different to br2) but all of the wlX.Y...
  4. N

    Guest Network not working in Firmware 386.2_2

    With “Enable VPN + DHCP Connection” set to No (and router rebooted), the 2.4Ghz Guest1 network wl0.1 appears to be connected to the br1 bridge but the br1 bridge still has an IP range of 169.254.0.0 and all 2.4Ghz Guest 1 clients are not given a DHCP IP address when connecting and therefore...
  5. N

    Guest Network not working in Firmware 386.2_2

    My WAN connection is PPPoE and I have to enable an ISP IPTV profile for the connection to work (even though I don’t actually use the IPTV). So it appears that the issue is caused by wl0.1 not being attached to br1 (192.168.101.0/24)? Is that something the Asus Merlin devs could take a look at...
  6. N

    Guest Network has no internet access unless I enable access to intranet

    I did some investigation into this same issue in another post - Definately looks like a bug somewhere? Post in thread 'Guest Network not working in Firmware 386.2_2' http://www.snbforums.com/threads/guest-network-not-working-in-firmware-386-2_2.71981/post-724432
  7. N

    Guest Network not working in Firmware 386.2_2

    So I did a little more digging here and something definitely doesn’t look right with the 2.4Ghz Guest Network 1 interface (wl0.1) / br1 when “Access Intranet” is set to “Disable” - In this scenario, the wl0.1 interface is not attached to any bridge and all 2.4Ghz Guest 1 clients cannot access...
  8. N

    Guest Network not working in Firmware 386.2_2

    I assume this is still a bug since I’m on the latest firmware with AC86 master router and AX56U node and see the following. Note: I also have OpenVPN client configured on the Master node… (A) 2.4ghz guest #1 does not work - Master and AiMesh node clients do not get a valid DHCP address and...
  9. N

    RP-AC55 random reboots with linux in the network

    I’m seeing the same type of issue with my multiple RP-AC55 units rebooting themselves. Although I have both Linux and Windows clients on the network, are you sure the issue is related to Linux hosts? My RP-AC55 units seem to reboot more (sometimes like 3-4 times in an hour) when there’s video...
  10. N

    Feature Request: Export/Import DHCP Manual Addresses and Port Forwarding Config

    When changing routers (different Asus models), I usually manually configure the new router from the old's settings in the Web GUI. There doesn't seem to be a way currently to mass configure the DHCP Manual Addresses (LAN -> DHCP Server -> Manually Assigned IPs) and Port Forwarding (WAN ->...
  11. N

    snmpd crash on RT-AX88U

    I assume this is still an issue since the SNMP tab is not present in the RT-AC86U Web GUI? Has this been tested recently with net-snmp and has the issue been raised with net-snmp? Thanks!
  12. N

    RT-AC88U loses WAN and LAN access, only WiFi still remains until physical replugging of ports?

    Yes, I will disable link aggregation and just use the first 4 LAN Ports to see if that makes any difference but it would still be good to know if anyone has any suggestions for userspace commands which can be run over local SSH (WiFi) to disable/enable the ports in case this happens again -...
  13. N

    RT-AC88U loses WAN and LAN access, only WiFi still remains until physical replugging of ports?

    Ok thanks Colin... If there’s no userspace command to view the reliable states of the ports across both switches, are you aware of any command which can reliably disable / reenable the interfaces / ports / switches to mimic a physical replugging of each of the cables? This would at least in...
  14. N

    RT-AC88U loses WAN and LAN access, only WiFi still remains until physical replugging of ports?

    Intriguing! If robocfg can't be trusted to output the correct config for both the Broadcom (Ports 1-4 and WAN?) and Realtek (Port 5 -8 ) switches, is here a command line command that can be trusted and allows the user to disable / re-enable the switches/ports individually to mimic physical...
  15. N

    RT-AC88U loses WAN and LAN access, only WiFi still remains until physical replugging of ports?

    Hi Guys, I’m seeing a very strange problem with my Asus RT-AC88U (at the time running Merlin 384.10_2 but I’ve since upgraded firmware to 384.11 Beta 1) where, randomly (it happened about 4 times in the last couple of weeks) , the router will lose WAN connection (WAN light on router is RED) and...
  16. N

    DHCP - UEFI and PXE support.

    Hi @ColinTaylor, @kryptto Just wondering where you got the following files from and whether they were pre-built binaries or you had to build them yourself with embedded drivers/scripts? BIOS - undionly.kpxe UEFI-64 - ipxe.efi UEFI-32 - ipxe.efi I assume that the UEFI-64 and UEFI-32 files...
  17. N

    Ac88u snmp grafana

    Glad you got it working! I actually now recall having a few issues with the structure and formatting of the base config from the above URL you posted so I spent some time amending the telegraf config so that there is a single snmp.input (writing to snmp.hosts.<Table Name> measurement) for all...
  18. N

    Ac88u snmp grafana

    (A) Ok, let me know how it goes - Just google for Telegraf command line test, create a test.conf file (with just your input, no need for output) and run on the command line. To rule out Telegraf and InfluxDB completely and to test that the snmp server is working on the router, have you run a...
  19. N

    Ac88u snmp grafana

    I have the AC88u and have it working with Telegraf SNMP -> Influx. I actually used the same base telegraf config that was given at the URL you mentioned in your post (it worked pretty much out of the box for me) but I then customised it quite a lot for my setup (nothing to do with any...
  20. N

    Link Aggregation on more than 2 ports (RT-AC88U)

    Hi @RMerlin , Do you have any insight / comments for these possibilities? Can this be done with the Asus Merlin firmware, either through the GUI (preferable) or via NVRAM? Thanks!
Top