Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. B

    AC3200 Merlin Firmware issues

    Was unable to do this because the please reboot dialogue stays in the screen.
  2. B

    AC3200 Merlin Firmware issues

    Ok will give that a go right now. Edit: I'm unable to reboot using the reboot button in the GUI because the dialogue that says reboot router doesn't move off the screen.
  3. B

    AC3200 Merlin Firmware issues

    Ok first thing I did was I went into the web GUI and flashed the firmware (the one you recommended trying) after the flash was complete and it ask for a manual reboot, I let it sit there for 10 mins before powering the unit off and back on again. From there it went into the bootloop where it...
  4. B

    AC3200 Merlin Firmware issues

    No dice now. Went into a bootloop, I used the recovery program to flash it again and I'm getting the same thing.
  5. B

    AC3200 Merlin Firmware issues

    Really appreciate all the help your giving me.
  6. B

    AC3200 Merlin Firmware issues

    Got to connect, remember i damaged my wifi card on the laptop.
  7. B

    AC3200 Merlin Firmware issues

    OK I'll give it a go again in a few minutes carrying the laptop in the living room and just leaving it in there and hopefully the device stabilizes enough to allow it to reboot without any issues.
  8. B

    AC3200 Merlin Firmware issues

    OK will try again later tonight with that firmware. I will flash through the GUI. Question do I have to reboot the router manually after flash even if the router reboots on its on?
  9. B

    AC3200 Merlin Firmware issues

    I've had the router for about 2 months now and I was flashing 380.68_0 and 380.69.0. Edit: My reason for flashing the merlin firmware is because I wanted to install plex on the router. Doesn't seem like something that will be possible if the router refuses to boot back up after power loss.
  10. B

    AC3200 Merlin Firmware issues

    Thanks for the help anyways, guess I'm stick with stock firmware
  11. B

    AC3200 Merlin Firmware issues

    Most connections are wireless. My thing is I don't want the situation to occur that the power trips out and I have to come home and reflash the firmware on the router for the flash to continue using it.
  12. B

    AC3200 Merlin Firmware issues

    My modem is in the living room which is where the router is located next to it. I bring the router in the room to my desk to flash and carry it back out in the living room. So when I turn the device off to return it , its never comes back on. Sometimes we have power outages since we're...
  13. B

    AC3200 Merlin Firmware issues

    Yes am working in router mode. When I reflash the device its working fine. Its only when I unplug it to put back to is original location it never boots back up.
  14. B

    AC3200 Merlin Firmware issues

    No, I don't have any scripts or anything.
  15. B

    AC3200 Merlin Firmware issues

    Well the first time with all my setting restored it didnt try to edit anything. The second time when I did a factory restore I edited up the access points and that was it.
  16. B

    AC3200 Merlin Firmware issues

    I actually did redownload the firmware just make sure it wasnt a bad one and checked the hash to verify. The only thing I have plugged into the router was the ethernet cable to the laptop. I only resorted to trying a factory reset when I noticed the router wouldn't bot baack up after a reboot...
  17. B

    AC3200 Merlin Firmware issues

    Still the same results the modem booted up but anytime the router is rebooted or is powered off it doesnt boot anymore. What I did ws flash the firmware and waited over 15 mins after I flashed it the router it rebooted and started up with all the lights on and i left it like that for 15 mins...
  18. B

    AC3200 Merlin Firmware issues

    Thanks for the response, I'm going to reflash the latest version again using the firmware recovery mode and leave it running for 20 mins. So once the unit has rebooted itself and powered back up and I waited the 20 mins, I should unplug the unit for how long before powering back up? Cause I...
  19. B

    AC3200 Merlin Firmware issues

    Hello everyone an issue trying to get the merlin firmware installed on my router. I downloaded it and reset my router to factory settings. I loaded up the merlin firmware and when it was done installing I unplugged the unit for a minute. After that I plugged it back in and the internet led and...
View older results
Top