What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Search results

  1. W

    Access AX88U Web GUI remotely using Instant Guard vs port forwarding

    Ok noted. I've remove this=> "Enable Web Access from WAN" and then use instant guard and able to access it using local IP address :)
  2. W

    Access AX88U Web GUI remotely using Instant Guard vs port forwarding

    Dear Sir/Mdm, I setup DDNS in the AX88U router and then enable Web access via WAN. From remote site, I can use my laptop connect to any internet to access the AX88U GUI. I was told this is a security risk. I wanted to understand what security risk it has? At the end of the day, it needs the...
  3. W

    Firmware download link for ASUS ZenWiFi AX (XT8)

    Guys, any plan for V2 hardware support ? I've bought the Zenwifi AX (xt8) in year 2023. The wifi seems not stable . I am using the stock firmware 3.0.0.4.388_24621 . It is in AIMESH using 3 units. The AIMESH GUI showing "GREAT" for the AIMESH router to the two nodes. So I am not sure why...
  4. W

    How to force an update on Client List

    Also, to get the updated client list, you need to reboot the AIMESH main node. That's not proper. This is a very basic bugs. :(
  5. W

    How to force an update on Client List

    If you look at the system log, you will find that the device deauthenticated. Meaning left the house and no longer connected to the wifi. But the client list still listed as being connected and it can also display the Wifi signal strength. Even if you use "refreshes", it will still show the...
  6. W

    How to force an update on Client List

    Dear Sir/Mdm, For all ASUS router I've used, it seems the Client list sometime misbehave. ie it is not updating properly. e.g. My client device is connected to the Wifi but the router client list is not showing that its connected. I've tried using the ASUS AX86U_PRO as the AIMESH router and...
  7. W

    Binding

    I do not understand why today I found that the binding works. It can now show "unbind" on those clients which I've bined previously. As I cannot find the root cause to it, for people encountering something weird like myself, just reboot main aimesh router.
  8. W

    Binding

    My optical modem is a bridge. It connect to my AX88U where it act as a router. Since its at my basement, I disabled the wifi. One of the LAN port is connected to my AX86U_PRO as the main AIMESH operating as wireless AP. The node is AX11000. IMHO, AX86U_PRO is equivalently good vs AX11000 😅. I...
  9. W

    Binding

    This is merlin firmware 388.8_2 release. Binding cannot work. Also, the client list for the AIMESH will not update properly. E.g if my phone connect to 5G or 2.4G, whether in the AIMESH main node or subnode, it will not show. My AIMESH main node is in AP mode. The main router will be able to...
  10. W

    Binding

    Hello, in one of my house, I uses Zenwifi AX stock firmware and I can do binding. Ie selected clients can bind to whichever Aimesh node you wish to especially those stationery client like SmartTV to the closest Aimesh node. This, I can’t find any Merlin firmware. So I’m using the stock. In my...
  11. W

    Release Asuswrt-Merlin 3004.388.8_2 is now available

    Can see the details reported here:- https://www.snbforums.com/threads/ax86u-pro-aimesh-router-in-authentification-method-set-to-http-https-will-not-able-to-access-remote-aimesh-node.91221/#post-921010
  12. W

    Release Asuswrt-Merlin 3004.388.8_2 is now available

    When authentication set to BOTH instead of default http on a aimesh AP main node , one cannot access remote aimesh node. You have to set authentification to http before you can access Aimesh node. Also, when Aimesh node led set to off, if there is a power cycle, the led will light up again...
  13. W

    AX86U Pro AIMESH router in AUTHENTIFICATION METHOD set to http & https will not able to access remote AIMESH node

    thank you Ripshod. But earlier firmware can support. If I use ddns to remotely access the router , I used to use https://<ddns>:8443 . Would there be an issue if I use http:// now to access the aimesh router via wan? Best Regards Wee How
  14. W

    AX86U Pro AIMESH router in AUTHENTIFICATION METHOD set to http & https will not able to access remote AIMESH node

    When click the AIMESH node for firmware upgrade, if it auto go https://192.168.1.159:8443 (where 192.168.1.159 being the AIMESH NODE), it will not work. If I only set authentication method to HTTP only, it will auto go http://192.168.1.159/ and it will work. Hope someone can help? Thank you so...
  15. W

    AX86U Pro AIMESH router in AUTHENTIFICATION METHOD set to http & https will not able to access remote AIMESH node

    Dear All, My AIMESH router is AX86U-PRO and my AIMESH node is AX11000. Recently after the merlin firmware update to the 388.8.0 , I found something weird. My authentication method is setup to be both http/https (Administration->System->Authentication Method -> BOTH) 1. When I click upload...
  16. W

    Latest firmware 388.7 for AX88U and AX11000 and 386.13 for AC88U

    Still cannot work. AiMesh still connected but I can only see 2.4G. These 5G-1 cannot be found. The AiMesh main and the node still connected via 5G-2 which I’ve set it as preferred connection between them. It is weird I cannot find the 5G-1. I got to do a manual power down and up before the 5G-1...
  17. W

    Latest firmware 388.7 for AX88U and AX11000 and 386.13 for AC88U

    My setup was main router AC88U connected to optical modem with RJ45 WAN port. The output of AC88U will go to various RJ45 of my various rooms. This act as my main router with wifi disabled. Floor level1 has RJ45 connect to AX88U as the main WIFI mesh. Floor level2 is the AX11000 as the node...
  18. W

    AX88U as main AIMESH and AX11000 as node. Node disconnect once per week

    Thank you DrinkingBird. Not sure why I didnt rx this response via email but thank you so much for the help. I used AC88U as my wifi router previously. When I upgrade to wifi6, I bought the AX88U and then followed by AX11000. As I need an 8ports router from the optical modem, I set the AC88U as...
  19. W

    AX88U as main AIMESH and AX11000 as node. Node disconnect once per week

    Thank you drinkingbird. I see.. I have the main router being AC88U (wifi off) and connect to various RJ45 point. One of the RJ45, I hookup to AIMESH main (AX88U) to use for the Wifi at home. The AX11000 is another as AIMESH node which connect to the AX88U via wifi...likely 5G-2 . I do a daily...
  20. W

    AX88U as main AIMESH and AX11000 as node. Node disconnect once per week

    Hi, new to this forum. If I ask not clearly, please pardon me. 1. AIMESH main => AX88U (firmware 388.4 release) 2. AIMESH node => AX11000 (firmware 388.4 release) For the AIMESH main, I do a reboot every two days at early morning when all asleep. I expect it will also do reboot for the AIMESH...
View older results
Back
Top