Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. M

    Dual WAN with Android 12 (USB tethering)

    In the mean time, I found a solution that works pretty well but involves getting an inexpensive adapter. You can grab a usb-c to ethernet adapter for $15-$20 and you can use the phone in ethernet tethering and connect the phone to one of the routers LAN ports. You can then configure the router...
  2. M

    Dual WAN with Android 12 (USB tethering)

    Asus said that they will look into it. There is a patch from last year that was PRed to Merlin but he rejected it. This patch would fix this issue. OpenWRT got it working but it doesn't support your router. So now we wait for ASUS to fix this.
  3. M

    Dual WAN with Android 12 (USB tethering)

    Hello, as I said I got it working with my samsung but not with my xiaomi. I have installed your script of course but i cant use it unless my phone gets detected. I tested my phone with OpenWRT and it works perfectly fine. I have also contacted ASUS with the information I gathered since they...
  4. M

    Dual WAN with Android 12 (USB tethering)

    Hello, trying to set up dual WAN using my phone on my RT-AC88U. I have an older Samsung Galaxy Note 9 that runs Android 10 and that phone works fine through USB tethering. However, my new Xiaomi 11T Pro with Android 12 is never detected by the router and it doesn't even work as a storage device...
  5. M

    RT-AX3000 crashing every few days in bcmsw_rx (Tried hw/sw reset/rebuilds and even new replacement router)

    I know this is not ideal, but all of you trying to do DNS work on the router, I would suggest to try to do DoT off the router like on a rpi for example. Just a suggestion.
  6. M

    Release Asuswrt-Merlin 386.3 is now available

    Hello Merlin. I wanted to report a minor issue with version 386.3 on AC88U. On the main page, I receive this in the browsers console log: jquery.js:5 Mixed Content: The page at 'https://**********/index.asp' was loaded over HTTPS, but requested an insecure XMLHttpRequest endpoint...
  7. M

    NAT loopback only works when NAT acceleration is disabled

    Unfortunately, this is not related to name resolution since even typing the IP directly doesn't work.
  8. M

    NAT loopback only works when NAT acceleration is disabled

    Hello, thanks for the answer. I have no problem connecting with LAN IP or DDNS either. The problem is only with my WAN IP.
  9. M

    NAT loopback only works when NAT acceleration is disabled

    Hello, I'm on a 250/250Mbps connection and I run some servers through my AC88U router. Some firmware versions ago (Like summer 2019), the NAT loopback was working fine but now, on 384.13, it seems broken. I can no longer connect to my server using a direct WAN IP connection from within the LAN...
  10. M

    Using pihole causes the router to stop resolving

    Thank you for taking the time to create these posts. I'm using Quad9 filtered iIPv4 DNS and I have no requirement for DoT. There is small issue that I noticed though. When I activate the DNS Filtering, I receive an email from my synology NAS that it has lost connection to the synology servers...
  11. M

    Using pihole causes the router to stop resolving

    Thanks I did that. The pi is on the exceptions list below and the global filtering is set to custom 1 using the pi's local IP.
  12. M

    Using pihole causes the router to stop resolving

    Thanks for the answer. I did that just now and I will report back if I have issues. However I wonder why all these DNS entries? WAN has one, LAN has another and now there is even a seperate tab that does a per client basis? I was under the impression that the WAN entry was "the right way" to do...
  13. M

    Using pihole causes the router to stop resolving

    Hello, I'm currently using PiHole on a raspberry pi model 3B+ for my DNS filtering/resolving needs and I set its LAN IP address in the WAN DNS page of the router. All works good for some days but then the router randomly stops resolving addresses. The solution is then to either restart the...
  14. M

    Funny ssh issue after power outage

    Hello. The ssh is indeed open but not on standard port. However this is not a security issue for me since i have a rather complex setup. I use reverse proxy over ssl to expose the gui having wan access disabled so this is also covered. I use a dedicated debian system that i host a softether...
  15. M

    Funny ssh issue after power outage

    Hello, After a power outage, my AC88U restarted. Everything is working fine but I noticed that the web gui is not accessible. I tried to ssh to the router and that is working fine as well. However when I try to execute a command, nothing happens. I receive no error and no output either. I just...
  16. M

    384.9 not showing all devices in Bandwidth monitor and MAC addresses showing in Traffic Analyzer

    Security > Features
  17. M

    [384.9_Alpha - builds] Testing all variants.

    I feel like thanking both of you :) Where can we access these information? Is it in the Traffic Analyzer -> Statistic tab?
  18. M

    [384.9_Alpha - builds] Testing all variants.

    @RMerlin thanks for your continued updates. I just saw that Asus released the gpl 384.45149 for the AC88U. Will you add it to 384.9? Thanks in advance
  19. M

    IFTTT - how much do you care about security?

    Well, IFTTT is still not working on Merlin so since its unsupported and Merlin will never fix it to work with his firmware then there is no security risk at all.
  20. M

    IFTTT and 384.6

    Thank a lot for your answers. But since you are in direct contact with Asus, can you try to make this work with your firmware pretty please? :) I understand that this is a security risk but I can make this work with my reverse proxy server later on as long as it works with the default way but...
Top