Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. K

    DNS Across VPN to My Router

    DNS on my ASUS router isn't responding across VPN. Please help me figure out how to diagnose. I'm running OpenVPN on my RT-AC68U which runs Merlin 384.19. I'm running DNS on my router. When I'm connected locally, it works just fine. When I connect via VPN, I can't get DNS on my router to...
  2. K

    WAN Via WiFi

    Since I have a drawer-full of wifi-enabled routers, I'm thinking that plan-B would be to take an unused N66U, put *it* in repeater mode, associate it to my cell phone, and then to plug my AC68U into that. i.e. I'll add a router in repeater mode, upstream of my 'real' router. I knew there was I...
  3. K

    WAN Via WiFi

    How do I reconfigure an RT-AC68U to get its WAN connection via WiFi? I'm aware that I can change "Operation Mode" to Repeater, but that makes additional, undesired changes, such as altering its LAN IP address. I have an AC68U with an ISP router upstream. I want to just (manally) switch the...
  4. K

    Complex, 3 Routers Interconnected

    For the record, it works quite nicely. 2 ASUS+Merlin routers defining 2 networks behind one ISP router. Kids' network on one router; adults' network on the other. Each router has a manually added route to direct appropriate traffic to the other. Firewall on the kids router has a rule to permit...
  5. K

    Finding Where "Traffic Analyzer - Statistic" On/Off Is Stored

    I'm looking at the source to TrafficAnalyzer_Statistic.asp, trying to figure out where the On/Off flag is stored. In the code, I see: $('#traffic_analysis_enable').iphoneSwitch('<% nvram_get("bwdpi_db_enable"); %>', function(){ switch_control(1); }, function(){...
  6. K

    segmentation fault on ntp

    Fair question. AC68U and AC1900 Version 384.19 (And I just added those to my signature but, sadly, I haven't figured out how to make my signature show up here.)
  7. K

    segmentation fault on ntp

    Need help with ntp segmentation faults. GUI reports: "Reminder: The system time has not been synchronized with an NTP server." syslog.log contains many: "reboot_scheduler: [timecheck] NTP sync error" Running "ntp -w -p pool.ntp.org" reports: "Segmentation fault" Running "ntp -w -p...
  8. K

    Routing Via GUI Ineffective, What Am I Doing Wrong?

    ColinTaylor: Thank you for the reply. No. The router on which I am entering this route has a WAN address of 192.168.2.8. Maybe we're just missing on vocabulary. I think the GUI fields I mentioned above are the equivalent of the command-line route I mentioned above, and the command-line route...
  9. K

    Routing Via GUI Ineffective, What Am I Doing Wrong?

    When I create a route via the GUI: Network/Host IP = 192.168.4.0 Netmask = 255.255.255.0 Gateway = 192.168.2.4 Metric = 1 Interface = LAN Click "+" Click APPLY it doesn't show up in the routing table when I connect via ssh and run the route command. What am I misunderstanding? Is there a...
  10. K

    Complex, 3 Routers Interconnected

    L&D: Thank you for your reply. It will assign non-routable, private IPs from 192.168.x.x. That's what it currently assigns to 'untrusted's WAN port. I do have the occasional port forward from the ISP router, but the ISP router's WAN port is the only external IP address on my network, and will...
  11. K

    Complex, 3 Routers Interconnected

    L&LD - Thanks for the reply. We seem to be talking past one another. You said it won't work without two external IPs. I asked what specifically will fail? Now you've assumed a second IP. I can buy another public IP address if I understand the need for one. But I don't need the outside world...
  12. K

    Complex, 3 Routers Interconnected

    Oh. There you go. NAT - That's a complication and a simplification. From the standpoint of the ISP router, there is no 192.168.2.x or 192.168.3.x -- just the external IP of 'trusted' and 'untrusted'. The ISP router does not have the ability to manually add routes. So, as cptnoblivious...
  13. K

    Complex, 3 Routers Interconnected

    What an interesting idea! What specifically will fail? The ISP router does NAT. It is used to having multiple IPs on its LAN.
  14. K

    Complex, 3 Routers Interconnected

    I'm trying to run a 'trusted' home network and a separate 'untrusted' network. I'd like to remove a router dependency. Today, I have trusted devices connected to my "trusted" AC68. My AC68 WAN port connects to an "untrusted" AC66, which also has the untrusted devices connected. The AC66's...
  15. K

    DNS Fails Until DHCP Lease Using dhcp-host Entries

    When I add DNS names via dhcp-host entries in dnsmasq.conf, they don't work until the device requests a DHCP lease. Is there a way to make them take effect even when the device hasn't requested a DHCP lease yet? I put items in my /jffs/configs/dnsmasq.conf.add...
  16. K

    Update Broke 'nvram set dhcp_staticlist'

    Ah. There it is. Thanks!
  17. K

    Update Broke 'nvram set dhcp_staticlist'

    Arg! I see why nothing DNS is working. The router is doing name resolution using only DNS from the upstream DNS server. It isn't using its own DNS entries. How do I tell the router that when I'm logged in via SSH, it should check its own DNS/nslookup before going to the upstream router?
  18. K

    Update Broke 'nvram set dhcp_staticlist'

    OK. I think I've got it. If I delete dhcp_staticlist="<11:22:33:44:55:66>192.168.1.60>fred<22:33:44:55:66:77>192.168.1.61>mary" I think I can replace it with putting the following lines in /jffs/configs/dnsmasq.conf.add dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,1440m...
  19. K

    Update Broke 'nvram set dhcp_staticlist'

    OK. I've seen hints to that effect. I can't tell what I am supposed to *do* in order to convert from the old dhcp_staticlist to the new dhcp_staticlist and dhcp_hostnames. Do I just set both of them the string: <MAC>IP>HOSTNAME<MAC>IP>HOSTNAME<MAC>IP>HOSTNAME Do I set staticlist to...
  20. K

    Update Broke 'nvram set dhcp_staticlist'

    How do I define a large number of dynamic DHCP addresses and host names like dhcp_staticlist used to do? Somewhere along the way, it looks like an update made 'nvram set dhcp_staticlist="<MAC>IP>HOSTNAME<MAC>IP>HOSTNAME<MAC>IP>HOSTNAME"' obsolete. As near as I can tell, I'm supposed to put...
Top