Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    I believe I have placed the booting script at the top of the thread; you can find it in the script. /jffs/scripts/wan-start
  2. M

    Entware Guide to Adding 2FA to Incoming Ports on AX86U

    I have collected a few paths that were repeatedly attempted for exploitation this week. I am using an unusual port, and this is subsequent to the stunnel. Tons of non-HTTP incoming connections have been filtered out. These were gathered from my home router. I'm guessing the robots.txt is from...
  3. M

    Entware Guide to Adding 2FA to Incoming Ports on AX86U

    Yes, I have been using high-numbered ports, specifically those above 5000 and forwarding to local 3389, but attempts to connect persisted. I noticed the same IP address from various locations around the world repeatedly trying to establish a connection.
  4. M

    Entware Guide to Adding 2FA to Incoming Ports on AX86U

    I'm currently using RDP and providing a few public services for my family. Since RDP doesn't support public-private key authentication, my open ports have been subjected to extensive scanning. It seems like there's always someone on the internet trying to exploit my ports. To combat this, I've...
  5. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    I'm glad that you have succeeded.😁 Just like what I have mentioned in the previous commen, maybe the bogus IP is from your up stream, the modem. That's why I wanted to know how your WAN was configured.🤔
  6. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    I see, thank you for the explanation. It seems you are using wireless link. Then It should be a moderm hand over the up-stream DHCP, I'm curious about what is the modern's local ip address? May I know your upstream network configuration? Is it PPPoE or LAN? That's strange; I've had ac68ux3...
  7. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    I truly appreciate your help. If you're interested, there are a few additional scripts available for: Matrix bot for online notifications Cloudflare DDNS PXE server for RPI3/4 socat poor man's http server for WOL Did any technical difficulties occur with the ISP? Is the internet...
  8. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    Congratulations! Good to hear it. Sorry for the typo, done. Also I have updated the Github link. Actually, I had done this before you mentioned it. At the bottom of the first post, you can find update logs. Thank you. I indeed need your help, please. I have been there. I had a lot of...
  9. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    Sorry, I forgot to mention that the firstrun_flag was set in /jffs/scripts/init-start. I have updated GitHub. Let's Conduct Some Diagnostics 1. Ping Test: Ping Computer 1 from Computer 2. 2. Webserver Check: If you are running webservers (such as Emby or Jellyfin) on Computer 1, try to...
  10. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    Exactly! I don't use Managed Routes because it broadcasts to all nodes. I want to hide some subnets from being exported to irrelevant nodes and prevent a death loop. It's my style—definitely a piece from one of my scripts. LOL. POSTROUTING is used after the routing decision has been made...
  11. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    For example, suppose you have two routers: the first is the main router with direct access to the internet, and the second is connected to the main router's LAN port and operates on its own IP subnet. It is recommended to install ZT on the main router only. Any device in the LAN with ZT...
  12. M

    Need buying advice on mini-PC

    nucbox5 windows 11/10 possible linux N5105 8GB RAM M.2 2242
  13. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    Would you mind quote the issues you had? I may have a clue. The scripts works on later and latest version of ZeroTier also. For ac68u there is no better version rather than 1.4.6. But to ac86u and ax86u, the latest version of ZeroTier is recommended. Here is the updated version of scripts...
  14. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    10.x.x.x/24 is my zerotier network address, for example my router has the ip addresses of 192.168.9.1(eth0) and 10.9.8.4(zt0). All ip routes are set by the commands. Such as `ip route add 192.168.7.0/24 via 10.9.8.3` And I made them into scripts and they run either by wan-event or by crontab...
  15. M

    [Solved] Asuswrt-Merlin USB Mount Issue

    386.7_2 USB3 I can confirm this issue. My 2TB USB drive suddenly can no longer be accessible, but it is still on the USB menu. fdisk -l can list the driver, but mount shows Invalid argument, in Network Place (Samba) Share / Cloud Disk, when I click this drive it is circling and never ends...
  16. M

    How can I limit a clients total internet time per day on the router without using scheduling? For example, 4 hours to use whenever they want.

    Then you can carry it on without the sudo, It is not a precise script, but you get the idea. Most of them can work with asuswrt without problem.
  17. M

    How can I limit a clients total internet time per day on the router without using scheduling? For example, 4 hours to use whenever they want.

    The -D will do. iptables -D INPUT -s 192.168.9.100/32 -j REJECT --reject-with icmp-host-prohibited Or you may prefer to ipset, then you can keep the iptables unchanged, just add/remove items in ipset. ipset -exist create clients_ipv4 hash:net counters ipset -exist add clients_ipv4...
  18. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    Yes, all devices under the router will be able to access zerotier network through counterpart's IP addresses. As long as you have set the route table(ip route add 192.168.9.0/24 via 10.0.0.4) in the router. Yes, zerotier client is not needed on other devices under the router.
  19. M

    The last cru task always gets corrupted? ac68u ac86u ax86u

    Thank you, I think you might be right. I haven't thought about the scheduler service might not be ready when powering up and wan_even are coming. I will try to move cru tasks to services-start.
  20. M

    The last cru task always gets corrupted? ac68u ac86u ax86u

    Thank you, I think add some delay is a good idea, I will try it later. I used to have another script that do cru a zerotier, but it caused some cru tasks disappearing, so I put all cru tasks into a single script myservices.sh and called by wan_event only.
Top