Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. D

    Turning mains power on/off - will it damage my router?

    I just checked with my electricity-provider: The stand-by consumption for our household is approx 0.1kW per hour (i.e. this is the power usage per hour for those hours where nobody is home) Quick math: 0.1kWh x 24 X 365 = 1051.2kWh/year at current price thats 4.000 DKr/year (~500USD) :oops:
  2. D

    Turning mains power on/off - will it damage my router?

    Several different sites (providers and governmental) report pretty much the same numbers - up to approx. 400kWh/year on standby, which equates to 10-15% of total consumption for an average family living in an apartment. Current price is ca. 4,0 Dkr/kWh (~0,5 USD). I have no idea what the standby...
  3. D

    Turning mains power on/off - will it damage my router?

    Thanks for all the replies guys. My question was to see if turning off devices from a mains switch (wall or powerstrip), is damaging for the devices. The general idea was to switch off as many devices that have standby power consumption as possible when not in use, e.g when we're at work or...
  4. D

    Turning mains power on/off - will it damage my router?

    I don't want to contribute to the doom and gloom. But unfortunately the current energy crisis is caused by the war in Ukraine. A lot of european countries are dependant on natural gas from Russia for energy and heating. Delivery of the natural gas has been restricted, because of politics. It's...
  5. D

    Turning mains power on/off - will it damage my router?

    Apparently we are facing a potential electricity shortage here in Denmark in the near future. We are being asked to conserve as much electricity as possible. It has even been suggested that electricity may have to be shut down for shorter periods, in selected areas, during this winter, depending...
  6. D

    Turning mains power on/off - will it damage my router?

    I have my router (AX86) and several other devices connected to a powerstrip with a on/off switch built in. Is it damaging for the electronics to turn the power off to a router (or other electronic devices) without using the on/off button on the router itself? Does it affect the longevity of a...
  7. D

    AX86U connection to AX58 Media Bridge - link rate gradually slows down.

    Yes. Link rates stay above 3000mbps (bottom row in attached picture).
  8. D

    AX86U connection to AX58 Media Bridge - link rate gradually slows down.

    I have noticed a couple of things: 1) I changed the 5GHz channel to 56 and it seems to have stabilized the speed drop quite a bit. 2) On the last stock firmware (AX86U v.3.0.0.4.386.45934, AX58U v.3.0.0.4.386.45934 from oct/nov 2021) my system was VERY stable: It didn't drop speed and stayed...
  9. D

    AX86U connection to AX58 Media Bridge - link rate gradually slows down.

    Thanks @Tech9
  10. D

    AX86U connection to AX58 Media Bridge - link rate gradually slows down.

    That screenshot was taken right after a reboot so not all devices were connected (and it's only for the 5GHz band). Right now i have 16 devices connected but we have up to 22 devices when working from home. A few of my devices are on the 2.4GHz band. I have the 2.4GHz set to 20/40MHz by default...
  11. D

    AX86U connection to AX58 Media Bridge - link rate gradually slows down.

    Thanks for that explanation @Tech9
  12. D

    AX86U connection to AX58 Media Bridge - link rate gradually slows down.

    @L&LD When i get the time to do a complete reset again (probably this summer) i may switch over to Merlin. @bbunge Everyhing is kept according to L@LD's setup. My son actually gets better performance using the current setup, mainly because the better placement of router/antennas compared to...
  13. D

    AX86U connection to AX58 Media Bridge - link rate gradually slows down.

    Thanks for your reply @L&LD Earlier this year i spent many weeks setting up AiMesh following your guides, but could not get it to work properly. First with two AX58U's and then with an AX86U and an AX58U. Even tried wired backhaul. However, AiMesh was most likely overkill for my apartment. I...
  14. D

    AX86U connection to AX58 Media Bridge - link rate gradually slows down.

    Thanks for your reply @bbunge I was actually using the AX58U as an AiMesh node, originally. However, that prooved to be problematic: Clients either all connecting to node and not to router, or vice versa (I'm guessing "too much" WiFi, if there is such a thing). Unfortunately there's no option...
  15. D

    AX86U connection to AX58 Media Bridge - link rate gradually slows down.

    I have an AX86U as my main router and i am using a AX58U in Media Bridge mode (connected to my sons PC). After a "fresh" reboot of the media bridge and then main router (in that order) i get Tx/Rx link rates at around 3600Mbbps/2400Mbps (see attached picture, bottom row). After a day or two the...
  16. D

    Solved Unknown device associating and disassociating repeatedly

    Never mind, i found out what it was... My daughters iPhone. When i looked at the list of connected devices it wasn't there because it was disassociated. Now it's associated again it pops up on the list. My bad. Sorry.
  17. D

    Solved Unknown device associating and disassociating repeatedly

    Yesterday i rebooted my AX86U, and reset the log. This moning when i looked at the log i saw a lot of Association/Disassociation events like the ones below (i have replaced the MAC ADRESS) Jul 5 07:57:29 wlceventd: wlceventd_proc_event(527): eth7: Auth (MAC ADRESS), status: Successful (0)...
  18. D

    RT-AX86 Series(RT-AX86U/RT-AX86S) Version 3.0.0.4.386.44130 - 2021/06/28

    I have the weird font on the AiMesh page too.
  19. D

    PC loses internet - help needed for troubleshooting

    Thanks for the suggestions @HTBruceM. I'll keep the suggestions in mind if/when the internet connection fails again. Right now i'll wait and see if the network reset works.
  20. D

    PC loses internet - help needed for troubleshooting

    So my PC just lost internet again. While i was surfing on the net. Nothing in the windows system log. Can't access the Asus router. Windows troubleshooter returns "no ethernet cable", despite the cable being in and both the notidication area icon says there is network and the LED is on on my...
Top