ipv6

I'm using a RT-AX86U router with firmware version 386.5_2. I have a DDNS address that translates to both A and AAAA [not really] records. Therefore, I have IPv4 and IPv6 dynamically translated. # nslookup [ddns.name] Server: 127.0.0.1 Address 1: 127.0.0.1 localhost.localdomain Name...

I setup OpenVPN Client on my router and I receive VPN's IPv4 address but I still have my public IPv6 address assigend from my ISP. When I use the OpevnVPN Connect app on Windows then I got only the IPv4 address from VPN and IPv6 is disabled. Is there some workaround than disabling IPv6 completly...

Hi, After finding out that wireguard requires flow cache disabled and so my rt-ax56u (fw 386.5) is not able utilize gig speed, I setup openvpn server. Vpn clients can access both internet and lan. In VPN IPv6 prefix/length I use a global /64 subnet of /48 prefix instead of ULA prefix. The goal...

I think that I posted this originally, in the wrong part of the forum, but I can't see how/where to move it. The original thread and posts are shown below (somebody like @Jack Yaz might spot the obvious error :D )...

I have an Asus RT-AC86U C1 router running Merlin v386.5_0. It's running very well indeed. I have an IVPN account, so I can run the IVPN App if / when needed on any suitable device (desktop / laptop / smartphone) on the LAN without any issues at all e.g. I have no big connection speed penalties...

Hello, I'm trying to run an OpenVPN server over ipv6. Synology NAS needs to have ipv6 configured using DPHCv6-pd in order to enable ipv6 in OpenVPN settings. Unfortunately, in this case, the NAS will not receive any prefix. IPv6 works when set to automatic. Synology requires a "properly"...

Hello, would it be possible to implement the list of active ipv6 connections in the same way as ipv4 in the system log? Thanks for any help.

I'm currently running version 386.4 on an ASUS RT-AC68U. When I had the router set to "Wireless Router" mode the ipv6 option showed up as you would expect, however when I switched it to "Access Point mode" the option for ipv6 disappeared. Looking under "Lan" didn't give me any hints as to how to...

Hi, any ideas how to enable ipv6 in docker? Thanks for any help

A long time ago, I liked public IPv4 addresses, so my router had a unique IP address, and I could connect to my OpenVPN server from anywhere. but about 3 years ago, my ISP stopped providing public IPv4 addresses. They used a technology called CGNAT to save their IPv4 resources. Instead, they...

I bought an AX-88U to replace my old router. I use 6in4 provided by HE's tunnelbroker to enable IPv6 on my LAN. I have been using HE's 6in4 for a long time with my old router and it was able to go on for months without interruption. Now with my new AX88U, IPv6 connection stops working after 3-5...

I am using AiMesh for my house. And my RT-AX58U drop ipv6 gateway after reboot or apply setting in router. it can pass http://test-ipv6.com/ before reboot or apply any setting in router. I have to replug cable of WAN for getting ipv6 gateway back. After that, I can pass http://test-ipv6.com/...

I am using an ASUS RT-AX58U in AP mode (NOT router mode) with Asuswrt-Merlin 386.3_2. In this configuration, the AP does not forward IPv6 router advertisements to WiFi clients from IPv6 routers on the same layer 2 network. With any other WiFi APs (e.g. Linksys, Ubiquiti, Devolo) connected to the...

I'm looking for assistance in troubleshooting IPv6 connection problem. While my ISP states that IPv6 is supported as a Native connection type with ASUS routers, I fail to get an IPv6 connection. There are no problems with IPv4 and connection is extremely reliable and performance as expected...

Hello! Router is RT-AX88U with 386.3_2 firmware. Clients are getting ISP IPv6 DNS instead of Google IPv6 DNS (DoT), manually set. System Log > IPv6 shows the expected Google DNS, 2001:4860:4860::8888 2001:4860:4860::8844. Is this the expected behaviour or we are doing something wrong?

The final re-edited / updated / posted errors removed, version of all of this now: The setup that I was using was as follows: Asus DDNS **.asuscomm.com is configured via the GUI page: **/Advanced_ASUSDDNS_Content.asp & No-IP DDNS **.ddns.net was configured via CLI in a new file here...

Hi all, I have the RT-AX86U 386.3_2, recently configured with IPv6 Tunnel 6rd, DHCP and RA enabled but I have issues resolving IPv6 in clients hostnames. Strange is querying the router's hostname does return IPv6 but not the rest of the clients hostnames: Below is my default dnsmasq.conf...

I’m trying to set up IPv6 on my new ASUS RT-AX86U running Merlin 386.2_6. My ISP is a local city owned fiber (Fort Collins Connexion). So far all they can confirm is that that support IPv6 but have been no help in providing any setup information. I’m not sure their tech support even knows how...

I configured br1 to the @Peter Havekes practice from https://www.snbforums.com/threads/ipv6-for-guest-network.30787/ And used tcpdump to capture packages on the ppp0. These packages were sent out and responsed remotely. It may be that I used the same network segment in br1 and br0 to cause...

Hello, I don’t use ipv6 but all my devices get an address. Is that normal? I use version 386.2_4 with an RT-AX88U