Menu
What's new
By:
Filters Better Search

qos

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. O

    Wired Mesh or Small Business for new house + QoS

    Hi everyone! I've been lurking for several months but I still have a few concerns regarding the network setup for my new house, I would appreciate a lot if I could get some advice. Some house details: - New house, 2300 sq ft split into 2 floors. - Concrete walls and floors - 200/15 Mbps...
  2. Kanji-San

    FlexQoS Adaptive QoS at full Giagbit Speeds

    So far I thought Asus routers could not handle full gigabit speeds with Adaptive QoS turned on. This was my experience with my, now gone, RT-AX88U. Adaptive QoS limited the maximum download and upload speeds to around 500Mbit/s instead of the about 940Mbit/s when turned off. My new RT-AX86U...
  3. Morpheus2020

    Bug of QOS Classification

    Hi, Everyone. My router is AX86U. The firmware is 386.2_4. Recently I found a bug. This is my setting of Adaptive QOS. It shows Coursera belongs to Learn-From-Home. But. In "Classification", Coursera belongs to "Video and Audio Streaming". And "Learn-From-Home" is 0.00Bytes forever. If I...
  4. Z

    GeForce NOW QoS setting on fiber?

    Do any of the GeForce QoS settings make sense to enable on fiber connections if you use GeForce? I know QoS is actually detrimental on gigabit connections but what do the GeForce settings do? There is GeForce NOW QoS mode under QoS which you need to enable QoS for, so I'm guessing I don't want...
  5. BlueOrbit

    RT-AX86U - QoS recommendation?

    Hello, I recently upgraded to RT-AX-86U router connected to a cable modem with a 500 mbps down and 10 mbps up. We have 4 computers used for school and work, 3 TVs, a VoIP phone (rarely used), Google and Alexa devices and an XBOX. Currently everything works well and the router is setup for...
  6. lzkill

    Bufferbloat only on 2.4GHz

    Hi folks. I have two RT-AC68R in a mesh setup (386.1_2). My Internet connection is a symmetrical 100 Mbps fiber. On the main router I've enabled QoS and FlexQoS 1.2.2 (amtm). The configuration is adaptative, bandwidth manually set to 90 Mbps, fq_codel selected. The traffic classes are ordered...
  7. D

    State of QoS

    Hey guys, I've been away for a while, the forum has a new look! Whats new with QoS and codel these days? I see FreshJR is taking a break. I have an ac68u on 300/300 fiber. Any minor download causes my ping to climb to the moon in one particular program. Any advice on mitigating this sort of...
  8. B

    RT-AC86U wired WAN-LAN throughput with/without QoS (stock fw)

    Recently upgraded my ISP service to 300 Mbps down / 10 Mbps up. Running a web-based speed test from my ISP's server (WAN side) on a desktop PC wired to LAN port of my Asus RT-AC86U I typically reach 20% above provisioned ISP speeds with QoS off, but as soon as I enable any QoS features on the...
  9. E

    Adaptive QoS does not show in GUI, AC68U 386.1 Beta 2

    I cannot enable Adaptive QoS, the only options are "QoS"and Bandwidth Limiter, as shown in the image below: I have done a factory reset after installing.
  10. tbrock47

    General Question regarding DMZ and QoS

    So I have a basic question that I was unable to answer via my Google sleuthing. How do the DMZ and QoS work together when both are enabled on the router? I have a device in my DMZ that I also want to have a fairly high priority in the QoS hierarchy. I have a feeling that DMZ devices are either...
  11. N

    RT-AX58U QoS does not limit upload

    My internet connection is cable 100/5. I was using RT-AC68U before with Merlin firmware with these settings: Adaptive QoS, fq_codel Cable(DOCSIS) 18 WAN packet overhead Manual limit: 80 / 2.5 It was working pretty good. --- Recently I `upgraded` to RT-AX58U. Installed Merlin, did the same...
  12. I

    Game Accelerator vs QoS

    Hello. I have an Asus RT-AC68U and I just updated the Merlin firmware from version 384.13 to version 384.19. Yes, I know, it has been a while since the last update. I'm a little bit lazy... Well, before the update I had the QoS configured to prioritize my gaming PC over all my home devices. And...
  13. Kashif Tasneem

    Dual WAN Load Balance or Fallback?

    Hi guys. I have 2 internet connections. Primary Internet connection is 50 Mbps while secondary is 20 Mbps. I am confused whether to enable load balance or fallback in Dual Wan. I would love to enable Load balance but it disables AI Protection, QoS, Traffic Analyzer and Bandwidth Monitor. My main...
  14. D

    FlexQoS FlexQoS 1.0 - Flexible QoS Enhancement Script for Adaptive QoS

    This is FlexQoS, a fork of the original, groundbreaking FreshJR_QOS script written by @FreshJR. FlexQoS provides a fully customizable Adaptive QoS experience. This thread is now superseded by Version 1.1 posted in this thread. Version 1.0.6 - 20-Nov-2020 Enhancements: Support for at least...
  15. T

    CakeQOS CakeQOS-Merlin

    I am pleased to announce the release of CakeQOS-Merlin! Discussions (due to thread closure): https://github.com/ttgapers/cakeqos-merlin/discussions Current Version: 1.0.7 (Changelog) CakeQOS-Merlin is a custom add-on for supported Asus routers with Merlin firmware that introduces CAKE QoS as...
  16. LongRangeSkeet

    RT-AX58U FQ_Codel issues

    Hi everyone, I just picked up this router today and set-it all up and enabled the FQ_Codel in the Adaptive QoS settings page. I'm provisioned at 200/10 by my ISP and Speedtest.net/Fast.com usually shows it hovering around 230+/12+ with zero % packet loss. Bufferbloat is F. The QoS...
  17. D

    [QoS] Bandwidth Monitor Tab vs Qos Tab : Need explanation please

    My Router Model : ASUS RT-AC68UF My Asuswrt-Merlin version : 384.17 Hi Everybody, I have a question about how QoS works. When we look in the "Bandwidth Monitor" tab, we can see that we can assign priorities to the different devices (highest, high, etc ...). => First prioritization When we...
    • David625
    • Thread
    • adaptive qos bandwidth monitor tab priorities qos qos tab
    • Replies: 4
    • Forum: Asuswrt-Merlin
  18. solstyce

    how to debug an iptable problem?

    I'm an iptables savage - I know just enough to know how thoroughly I could ruin my network configuration, and could use some help. I've tried to wrap my head around iptables several times over the years, and each time stagger away with a headache. I've run into a problem where my AC68U drops...
    • solstyce
    • Thread
    • ac68u firewall iptables merlin merlin 384.17 qos
    • Replies: 2
    • Forum: Asuswrt-Merlin
  19. S

    Guest Network B/W Limiter vs QOS Bandwidth Limiter

    RT-AC68R v384.17 firmware: If I enable the Guest Network bandwidth limiter feature, does the Adaptive QOS->QOS->Bandwidth Limiter (per MAC/device) table override the Guest Network limits? That is, if a device listed in the Adaptive QOS bandwidth limit table uses the guest network, which...
  20. J

    AX88U QoS not limiting upload speeds

    I recently purchased a AX88u and installed 384.16. My ISP speeds are 350 down and 30 upload. Set QoS to adaptive: fq_codel: upload 25: download 330:. Using dslreports, download is being limited (good bufferbloat) but see no change on upload (bad bufferbloat). Tried setting in traditional QoS...
Top