[384.15_Alpha - builds] Testing all variants.

[Vexira]

Adaptive QoS upload does not limit (download limits just fine)
Wifi 6/ax mode does not enable and disable unless you enable it during the setup. It indicates enabled but the moment you click to another tab and back it still shows disabled

Is that adaptive QoS error on wifi only or wired also?

 

[skeal]

+1
Mine fails on 2a, 2b & 4.
(I use DoT)

+1 on AX88U 384.15 Alpha_1

 

[Milan]

@Milan ...
Are you connected via DNS over TLS?
(WAN Settings)

yes, strict and used quad9 servers

 

[SomeWhereOverTheRainBow]

+1
Mine fails on 2a, 2b & 4.
(I use DoT)

Just thought I would mention this issue is also happening on 384.14 as well. This may be an issue with the site itself I cannot confirm tho.

 

[eclp]

yes, strict and used quad9 servers

Hmm... maybe it's a specific Cloudflare problem?

 

[S.claus]

Is that adaptive QoS error on wifi only or wired also?

Wireless. Will test wired out shortly

Edit: Wireless limits only on the download but not the upload. Wired does limit on the download and the upload

 

[XIII]

The title of this topic includes “Testing all variants”, but currently “all” means “a single” variant (AX88U), right?

 

[Vexira]

The title of this topic includes “Testing all variants”, but currently “all” means “a single” variant (AX88U), right?

I think the title is to save him changing it once the other builds are released.

 

[TheOldMan]

The title of this topic includes “Testing all variants”, but currently “all” means “a single” variant (AX88U), right?

 

[Vexira]

Wireless. Will test wired out shortly

Edit: Wireless limits only on the download but not the upload. Wired does limit on the download and the upload

I head it was only an issue on the new sdk that Merlin is not using odd.

 

[nzwayne]

Moved from 384.14 Beta3 to 384.15 Alpha on the RT-AX88U (back hauled to 2x RT-86U's at 384.14). All running without errror. Noticed in the AX88U Syslog these looping messages, which I didn't have before this conversion. Anything to act on, or ignore as what is somewhat usual for the syslog?

 

[skeal]

Hey people anyone have information about why I may be seeing this in my log?

Dec 22 13:54:47 rc_service: watchdog 1325:notify_rc stop_aae
Dec 22 13:54:47 rc_service: watchdog 1325:notify_rc start_mastiff
Dec 22 13:54:47 rc_service: waitting "stop_aae" via watchdog ...
Dec 22 13:54:47 NAT_Tunnel: AAE Service is stopped
Dec 22 13:54:47 NAT_Tunnel: AAE Service is stopped
Dec 22 13:54:48 NAT_Tunnel: AAE Service is stopped
Dec 22 13:54:48 AAE: AAE Service is started
Dec 22 13:54:48 Mastiff: init

EDIT: Found the answer here.

 

[Vexira]

Hey people anyone have information about why I may be seeing this in my log?

Dec 22 13:54:47 rc_service: watchdog 1325:notify_rc stop_aae
Dec 22 13:54:47 rc_service: watchdog 1325:notify_rc start_mastiff
Dec 22 13:54:47 rc_service: waitting "stop_aae" via watchdog ...
Dec 22 13:54:47 NAT_Tunnel: AAE Service is stopped
Dec 22 13:54:47 NAT_Tunnel: AAE Service is stopped
Dec 22 13:54:48 NAT_Tunnel: AAE Service is stopped
Dec 22 13:54:48 AAE: AAE Service is started
Dec 22 13:54:48 Mastiff: init

EDIT: Found the answer here.

I had that pop up last night on my ax88.

 

[Treadler]

Hey people anyone have information about why I may be seeing this in my log?

Dec 22 13:54:47 rc_service: watchdog 1325:notify_rc stop_aae
Dec 22 13:54:47 rc_service: watchdog 1325:notify_rc start_mastiff
Dec 22 13:54:47 rc_service: waitting "stop_aae" via watchdog ...
Dec 22 13:54:47 NAT_Tunnel: AAE Service is stopped
Dec 22 13:54:47 NAT_Tunnel: AAE Service is stopped
Dec 22 13:54:48 NAT_Tunnel: AAE Service is stopped
Dec 22 13:54:48 AAE: AAE Service is started
Dec 22 13:54:48 Mastiff: init

EDIT: Found the answer here.

Try tools>other settings>disable asusnat tunnel = yes?
Something I’ve always done & I never see that stuff in my log. YMMV.

 

[Delusion]

Hey, all you self-compilers, are you having trouble compiling 384.15_a1?

I'm getting this error...

make[3]: Entering directory '/home//amng/release/src/router'
Makefile:4115: *** missing separator. Stop.
make[3]: Leaving directory '/home//amng/release/src/router'
make[2]: *** [Makefile:4469: setprofile] Error 2
make[2]: Leaving directory '/home//amng/release/src-rt-5.02hnd'
make[1]: *** [Makefile:4293: bin] Error 2
make[1]: Leaving directory '/home//amng/release/src-rt-5.02hnd'
make: *** [Makefile:4439: rt-ac86u] Error 2

Now its fine. Compiles successfully . Thanks Merlin

 

[TheOldMan]

Now its fine. Compiles successfully . Thanks Merlin

I couldn't figure out why the working directory and the non-working directory refused to synchronize via rsync. So I chucked the working directory and re-rsync'd the directory. It's compiling fine. I had to do some git fixes to the non-working directory though.

Thanks, @RMerlin !

There is still a problem with the self-compiling git. Says some files missing. First it compiled 1/3 through and quit. Fixed some git issues and recompiled 2/3 through.

 

[octopus]

https://onedrive.live.com/?authkey=!AGY2taGX02nVmWA&id=CCE5625ED3599CE0!1427&cid=CCE5625ED3599CE0
Available builds: 384.15_alpha1
RT-AC68U
RT-AC86U
RT-AC88U
RT-AC3100
RT-AC5300
RT-AX88U

 

[skeal]

Someone has been busy! Great work Eric on the new AX88U Alpha 1! Happy Holidays!

 

[Marin]

https://onedrive.live.com/?authkey=!AGY2taGX02nVmWA&id=CCE5625ED3599CE0!1427&cid=CCE5625ED3599CE0
Available builds: 384.15_alpha1
RT-AC68U
RT-AC86U
RT-AC88U
RT-AC3100
RT-AC5300
RT-AX88U

For some reason this site has been down since last night.


Sent from my iPhone using Tapatalk

 

[skeal]

For some reason this site has been down since last night.


Sent from my iPhone using Tapatalk

I just accessed my friend works great!