AC88U PLEASE HELP

[VANGELI]

Hi , I used to use a AC68u in router moude but connected my LTE modem into one of the lan ports to be able to use the QOS and parental functions.

I upgraded to AC88U and set it up the same but now on my app and web UI I cannot see the connected devices where I previously could with my 68u.

Is there a setting somewhere to change?????

please help

 

[Sanna1967]

you tried to reinstall the app?

 

[VANGELI]

yes 3 times and also looked at web UI - same result. In AP mode I can see all users but cannot control time scheduling etc

 

[VANGELI]

you tried to reinstall the app?

I forgot to mention I am using merlin firmware same as on 68U

 

[JCaine]

So you are using LTE modem in ethernet mode - so an RJ45 connector? I would say connect the LTE modem into a computer and use the manufactures management application to confirm the settings. Additionally I would expect the to be connected to the WAN port. from the routers perspective I would imagine you have it set to DHCP mode?


Sent from my iPad using Tapatalk

 

[VANGELI]

the 88U's WAN is active and set to DHCP. The fibre modem(mikrotik) connects via cat6 to the ASUS lan port. I tried plugging into WAN port of ASUS but did not work. The modem is the DHCP server but like I said , my 68U in router mode worked fine like this and showed me all clients that I could control(just red led on showing no internet) but all worked.
The 88u works in router and AP mode but in router mode no clients are shown unlike the 68u.

I even tried disabling DHCP on modem but that ended up bad as well

 

[Grisu]

you would rather have to disable DHCP on Asus, now you have 2 DHCP servers running and conflicting each other.

 

[VANGELI]

yes HHCP is disabled on ASUS. That not the problem. I have internet access but cannot see the connected devices (clients)

 

[VANGELI]

The DHCP server is the fibre modem(ISP installed) and ASUS DHCP disabled on lan and nothing is connected to WAN port

 

[VANGELI]

so basically it is acting like an AP but in router mode in order for me to use the parental functions and time scheduling