Beta Asuswrt-Merlin 386.1 Beta is now available

[mobileman88]

No just turn it on on main router.

thanks mate. i go reset the AC68U (with latest stock firmware) and search for it from the AX88 again

 

[mobileman88]

Seeing these errors.. should I be concerned?

=========
CFG80211-ERROR) wl_cfg80211_change_station : WLC_SCB_AUTHORIZE sta_flags_mask not set
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
br0: received packet on eth2 with own address as source address
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
br0: received packet on eth2 with own address as source address
br0: received packet on eth2 with own address as source address
br0: received packet on eth2 with own address as source address
br0: received packet on eth2 with own address as source address
[tdts_shell_ioctl_stat:256] Recv ioctl req with op 2
br0: received packet on eth2 with own address as source address
bcm_i2c: bus 0: Failed to detect SFP: 100 retries exhausted
==========

 

[Wade Coxon]

br0: received packet on eth2 with own address as source address

Is your Ethernet backhaul using the WAN port on the node router? That looks like a network loop to me.

 

[mobileman88]

Not sure what I might be doing wrong. Still can't add my AC68u to the Aimesh when I searched for nodes. The AC68u is on latest ASUS firmware. My AX88 is on Beta3, WPS turned on.

 

[mobileman88]

Is your Ethernet backhaul using the WAN port on the node router? That looks like a network loop to me.

Yes mate. I tried.. factory reset AC68u...

Option 1 :
Ethernet backhaul from LAN of AX88 to WAN port of AC68u

Option 2 :
Leave it factory reset and searched for AC68u from AX88u after the power/2.4/5ghz lights are on after rebooting

Still no go.
I haven't done anything much to my AX88 config so not sure what might be wrong.

Is there a log somewhere to view?

 

[mobileman88]

 

[octopus]

View attachment 29064



View attachment 29063

Did you reset with WPS and pull reset button after to get in AiMesh mode on node?

 

[John Fitzgerald]

View attachment 29064



View attachment 29063

Are you wiping the JFFS Partition on the nodes? Put a check in the box and scroll all the way down and hit APPLY. --> then reboot.

 

[brummygit]

Yes mate. I tried.. factory reset AC68u...

Option 1 :
Ethernet backhaul from LAN of AX88 to WAN port of AC68u

Option 2 :
Leave it factory reset and searched for AC68u from AX88u after the power/2.4/5ghz lights are on after rebooting

Still no go.
I haven't done anything much to my AX88 config so not sure what might be wrong.

Is there a log somewhere to view?

A simple suggestion - wait maybe 10 minutes after the factory reset of the AC68U. I have found it takes a while to be stable before I can add mine. If I try too quickly I don't find it, or when I try to add it the first attempt fails.

 

[neil0311]

All these temperature post I find amusing considering much of this was discussed years ago and everyone was saying ignore the temps its normal.

Anyways it depends on the revision for the AX88U version 1.0 CPU wait is off by default. On Version 1.1 cpu wait is on by default.

Is there a way to check the rev from the firmware? Router is cabled and not easy to physically access without disconnecting.

So what you’re saying is rev 1.1 will run cooler than 1.0? Is that correct?

 

[New2This]

For me while using this beta I had to setup my (node) as a wireless router default,first then I connected the wired back haul and setup it as a node

 

[New2This]

Is there a way to check the rev from the firmware? Router is cabled and not easy to physically access without disconnecting.

So what you’re saying is rev 1.1 will run cooler than 1.0? Is that correct?

Running version on both 1.1 here. My temps.

 

[JemTheWire]

I find the title of this forum misleading. We are now, at the time I posted this, on beta 3. Is it possible to alter the title to just say 'Asuswrt-Merlin 386 beta'?

 

[dave14305]

I find the title of this forum misleading. We are now, at the time I posted this, on beta 3. Is it possible to alter the title to just say 'Asuswrt-Merlin 386 beta'?

Beta 3 of version 386.1. What part is misleading?

 

[[Jedi]]

Hi all,
I'm now again on Merlin 386.1 beta 3 because I like the features of Merlin's firmware and also because I had some drops of wifi connection on latest stock firmware.

The problem of the Bandwidth Monitor/Traffic Analyzer is still there for RT-AC86U also on new Asus beta 9.0.0.4.386.41535.

It seems that Asus fixed the problem only for the RT-AX86U and not for the RT-AC86U.

I hope that they will fix it soon, bandwidth monitor and traffic analyzer/statistics are completely unusable on new releases, while they're working without problems on latest stock firmware 3.0.0.4.386.40451.

About the CPU temperature on 386.1 beta 3, afted reactivating the CPU wait states (pwr config --wait on) I have 2.4 GHz: 43°C - 5 GHz: 52°C - CPU: 72°C. Only 5°C higher if compared with stock firmware and very far from the 80/85°C that my Rt-AC86U reached with the CPU wait states set to off.

Bye.

 

[JemTheWire]

Oops my bad. My brain read the title to say ‘Asuswrt Merlin 386 beta 1’.

Yet another senior moment.

 

[pbc]

Hi guys. Just purchased an AX86u a week ago and have been running stock firmware.

I just flashed this beta, and now have lost all access to the internet. That is, even my hardwired devices while they say connected, I can't access websites

I didn't reset to defaults before flashing as I didn't want to lose my reserved IP addresses and other rules.

Have tried rebooting the modem and router to no avail.

Strangely when I use the Network Analysis tool and ping Google, I get all packets recieved with no packet loss.

Any ideas?

 

[pbc]

Going to try a factory reset.

Edit: That worked.

 

[aex.perez]

I wanted to use Aimesh with wired uplink as my place is longish and there's very poor reception at the other end. I have a wire linked between the 2 ends of my place. Hoped to use it with Aimesh. But if Ethernet backhaul doesn't work i probably need another solution.

It works perfectly, just after you add the node, not before

 

[FelixGV]

@RMerlin seems parental control time schedules isn’t working in beta 3 still.. is this know issues can you look into it? AC68U.

Time scheduling doesn't work for me either. I've followed the procedure recommended by Merlin. It only works if I go back to the asus stock firmware.