Hi,
I had to place the asus router somewhere else at home, because my ISP has a special router/modem, that does IPTV, SIP and internet. I noticed that we have a lot of AP's in the area that are hopping channels. So i decided to boost the wifi a little bit.
I did the following:
nvram set pci/1/1/ccode=#a
nvram set pci/2/1/ccode=#a
nvram set pci/1/1/regrev=0
nvram set pci/2/1/regrev=0
nvram set wl0_country_code=#a
nvram set wl0_country_rev=0
nvram set wl0_reg_mode=off
nvram set wl1_country_code=#a
nvram set regulation_domain=#a
nvram set regulation_domain_5G=#a
nvram set wl1_country_rev=0
nvram set wl1_reg_mode=off
nvram commit
Then reboot.
After the reboot:
nvram set wl_txpower=200
nvram set wl0_txpower=200
nvram set wl1_txpower=200
nvram commit
Then reboot and full shutdown and boot.
I noticed some increase in signal strength.
Is 200 the max, or is it safe to set it higher?
Thanks.
I had to place the asus router somewhere else at home, because my ISP has a special router/modem, that does IPTV, SIP and internet. I noticed that we have a lot of AP's in the area that are hopping channels. So i decided to boost the wifi a little bit.
I did the following:
nvram set pci/1/1/ccode=#a
nvram set pci/2/1/ccode=#a
nvram set pci/1/1/regrev=0
nvram set pci/2/1/regrev=0
nvram set wl0_country_code=#a
nvram set wl0_country_rev=0
nvram set wl0_reg_mode=off
nvram set wl1_country_code=#a
nvram set regulation_domain=#a
nvram set regulation_domain_5G=#a
nvram set wl1_country_rev=0
nvram set wl1_reg_mode=off
nvram commit
Then reboot.
After the reboot:
nvram set wl_txpower=200
nvram set wl0_txpower=200
nvram set wl1_txpower=200
nvram commit
Then reboot and full shutdown and boot.
I noticed some increase in signal strength.
Is 200 the max, or is it safe to set it higher?
Thanks.