What's new

Voxel Custom firmware build for Orbi LBR20 v. 9.2.5.2.45SF-HW

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Voxel

Part of the Furniture
Continuation of:

https://www.snbforums.com/threads/c...bi-lbr20-v-9-2-5-2-24sf-hw.73983/#post-708327
. . .
https://www.snbforums.com/threads/custom-firmware-build-for-orbi-lbr20-v-9-2-5-2-43sf-hw.89645/
https://www.snbforums.com/threads/custom-firmware-build-for-orbi-lbr20-v-9-2-5-2-44sf-hw.90261/

New version of my custom firmware build: 9.2.5.2.45SF-HW.

Changes (vs 9.2.5.2.43SF-HW):

1. Toolchain: Go is upgraded 1.22.3->1.22.5.
2. OpenVPN is upgraded 2.6.10->2.6.11 (fixing CVE-2024-4877, CVE-2024-5594, CVE-2024-28882).
3. OpenSSL v. 3.0.x package is upgraded 3.0.13->3.0.14 (fixing CVE-2024-4741, CVE-2024-2511).
4. util-linux package is upgraded 2.39.4->2.40.2.
5. ethtool package is upgraded 6.7->6.9.
6. pcre2 package is upgraded 10.43->10.44.
7. gdbm package is upgraded 1.23->1.24.
8. sysstat package is upgraded 12.7.5->12.7.6.
9. logrotate package is upgraded 3.21.0->3.22.0.
10. less package is upgraded 643->661.
11. ipset: add patch to fix json output format for IPSET_OPT_IP.
12. Host tools: upgrade mkimage/u-boot to 2024.07.
13. Host tools: upgrade mtd-utils to 2.2.0.

The link is:

https://www.voxel-firmware.com (thanks to vladlenas for his help with hosting).

Voxel.
 
Thanks!

I installed the firmware to my LBR20.

After that i could no longer reach my NAS-server at its public dyndns address <myserver.somedns.com> from devices connected to my LAN. If i connected from outside my LAN, I could reach the NAS just fine.

It seems to be that the Voxel firmware might not support NAT loopback / NAT hairpin.
It does not seem to be possible to activate/deactivate it from within the user interface.

Access to my NAS from within my LAN, using the same address as when I'm on the go is a key issue for me.

So i installed the old firmware from Netgear, LBR20_V2.7.5.6. and it works like before.

Would it be possible to support NAT loopback / NAT hairpin? - or might it be that I am missing something else?

All my LAN devices including the NAS is connected to my old router (Asus) which is in the ORBI's DMZ zone forwarding all incoming traffic to the Asus router.
That might not be an ideal setup, but i want to be able to easily switch to using other 4G routers, without having to reconfigure all my setup in the new 4G router.
 

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top