Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0

[Pergola Fabio]

Hi,

I have frequent interrupts on my google Home Max, connected to an rt-ac88u, mesh enabled
With mesh, i linked it already to the best AP, i hope it would help, but still a lot of "Deauthenticated" messages

what could be the reason?

The wifi connection is quite good for 5Ghz, 4 of 5 bars

Jan  3 18:12:59 syslog: wlceventd_proc_event(491): eth2: Deauth_ind 7C:D9:..., status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Jan  3 18:13:03 syslog: wlceventd_proc_event(527): eth2: Auth 7C:D9:...., status: Successful (0), rssi:0
Jan  3 18:13:03 syslog: wlceventd_proc_event(556): eth2: Assoc 7C:D9:....., status: Successful (0), rssi:0

Its quiet annoying, because i stream radio on it, and then it stops

thnx

 

[Pergola Fabio]

These are 5gh settings:

 

[andyvxi]

I think we might be experiencing the same issue. I have the same entries in my log.

Google Home Mini devices disconnecting or being disconnected

Hi, I'm having a problem keeping my Google Home Mini devices connected to WiFi, and I don't quite understand the cause. Router: AX68U Merlin: 386.4 (and the version prior) Wifi Band: 5Ghz I have 3 such devices and they frequently and randomly, individually or together, show the same behaviour...

www.snbforums.com

 

[Pergola Fabio]

Also the same error message in log?

 

[Pergola Fabio]

Have you tried disabling power saver setting? That was my next step

 

[Pergola Fabio]

My Google mini devices are connected to 2.4... only hub is to 5gh...

Minis are working fine, so think related to 5 GH network?

 

[andyvxi]

Yes, I think the Mini's operate fine on 2.4Ghz but I prefer that they're on 5Ghz. They receive strong signal, so can't see why they shouldn't work reliably.

I see the following in my log:
wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind xx:xx:xx:xx:xx:xx, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:-50
hostapd: eth6: STA xx:xx:xx:xx:xx:xx IEEE 802.11: disassociated

Power save mode? On the router?

 

[Pergola Fabio]

yes, this one ...

 

[andyvxi]

Ah, okay, I'll give that a try too. Thanks.

 

[Pergola Fabio]

yeah, keep me posted

i'm still on 386.3.2

 

[Pergola Fabio]

your rssi value is -50 or -53 ,mine is always 0

not sure what it means tough

 

[andyvxi]

Apparently it's the Received Signal Strength Indicator in dB. My values seem fine, but I suspect your 0 is indicating a loss of signal.

 

[Pergola Fabio]

hmm, that would explain the issue, but why
it has a strong signal

do you have fixed 80mhz?

 

[andyvxi]

No, I've tried fixed 20Mhz fixed but it didn't help, so usually I have it set to 20 / 40 / 80.
Do you find things more stable when fixed?

 

[Pergola Fabio]

No, just set 80 MHz fixed to get good speeds when copying files

Have you turned off power now?

 

[andyvxi]

Yes, I've turned power saving off, and so far it seems to be going well, after about a day. That's without changing the bandwidth.

How about you?

 

[Pergola Fabio]

ok, i turned off that power setting, that didnt help
turning it back on now

 

[Pergola Fabio]

Saw 4 times they issue on a night

 

[supafez]

I have the same lines as this in my log. Mostly from an old 2010 Macbook pro. Approximately once an hour.

Doesn't seem to affect the connectivity or function of the macbook pro though so I've ignored it for now.

 

[Pergola Fabio]

No, its just a small interrupt but you notice it on Google devices, they take a while to reconnect