Menu
What's new
By:
Filters Better Search

dhcp_staticlist and dhcp_hostnames utility

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Xentrk

Xentrk

Part of the Furniture
dhcpstaticlist.sh is a helpful utility script to manage DHCP static leases. The script is only compatible with 384.13 release. The script displays a menu with the following functions:
  1. Save nvram dhcp_staticlist and dhcp_hostnames to /opt/tmp. This will allow you to restore the values after performing a factory reset.

  2. Restore nvram dhcp_staticlist and dhcp_hostnames from /opt/tmp/.

  3. Preview dhcp_staticlist and dhcp_hostnames in dnsmasq format.

  4. Append Output DHCP Static List to /jffs/configs/dnsmasq.conf.add & Disable Manual Assignment in the WAN GUI. You will then be prompted to reboot the router to have the settings take effect.

  5. Disable DHCP Manual Assignment.

  6. Enable DHCP Manual Assignment.

  7. Backup nvram dhcp_staticlist and dhcp_hostnames to /opt/tmp/ and clear nvram values.

  8. Display character size of dhcp_staticlist and dhcp_hostnames.
If you don't have entware installed, you can edit the script and change the /opt/tmp references to /jffs/scripts or whatever directory you want to use.

Installation
Code: 
/usr/sbin/curl --retry 3 "https://raw.githubusercontent.com/Xentrk/Asuswrt-Merlin-Linux-Shell-Scripts/master/dhcpstaticlist.sh" -o "/jffs/scripts/dhcpstaticlist.sh" && chmod 755 /jffs/scripts/dhcpstaticlist.sh && sh /jffs/scripts/dhcpstaticlist.sh

Menu
Code: 
Use this utility to save or restore dhcp_staticlist and dhcp_hostnames nvram values

[1] - Save nvram dhcp_staticlist and dhcp_hostnames to /opt/tmp/
[2] - Restore nvram dhcp_staticlist and dhcp_hostnames from /opt/tmp/
[3] - Preview dhcp_staticlist and dhcp_hostnames in dnsmasq format
[4] - Append dhcp_staticlist and dhcp_hostnames to dnsmasq.conf.add & Disable DHCP Manual Assignment
[5] - Disable DHCP Manual Assignment
[6] - Enable DHCP Manual Assignment
[7] - Backup nvram dhcp_staticlist and dhcp_hostnames to /opt/tmp/ and clear nvram values
[8] - Display character size of dhcp_staticlist and dhcp_hostnames (2999 is the limit)
[e] - Exit

==>

Documentation on the script and other utilities I wrote are available at:
https://github.com/Xentrk/Asuswrt-Merlin-Linux-Shell-Scripts
 
Last edited:
I had to make updates to the code to accommodate HND routers RT-AC86U and RT-AX88U. Please download the new version using the instructions above.
 
Will definitely try it out...thanks @ Xentrk
 
For previewing (#3):
Code: 
==> 3
Unexpected error condition dhcp_staticlist and dhcp_hostnames don't match
[: bad number
[: bad number
Press enter to continue
I can see there are about 3 entries in the hostnames files and scores of entries in staticlist
 
elorimer said:
For previewing (#3):
Code: 
==> 3
Unexpected error condition dhcp_staticlist and dhcp_hostnames don't match
[: bad number
[: bad number
Press enter to continue
I can see there are about 3 entries in the hostnames files and scores of entries in staticlist
Click to expand...
There must be an entry in dhcp_hostnames I am not accounting for.

The first version of the script expected the format of
Code: 
<mac address>hostname<mac address>hostname

I then had to modify to look for the word "undefined" based on feedback from an RT-AC86U user:
Code: 
<mac address>hostname>undefined<mac address>hostname

Please run the command below and let me know if you spot any values not in the order listed above. This will list the content of nvram and strip out the "<", ">" and "undefined" and replace them with a space:

Code: 
nvram get dhcp_hostnames | sed 's/<//;s/>undefined//;s/>/ /g;s/</ /g'

Code: 
nvram get dhcp_staticlist | sed 's/<//;s/>undefined//;s/>/ /g;s/</ /g'
 
Last edited:
BTW, I can confirm that I get the same error as elorimer for #3 (preview function). This is on my 86U, if that helps.

EDIT: I tried running the two suggested commands above, the first one returns nothing (blank line). The second one returns the expected IPs and MAC addresses, in order (no issue spotted there).
 
Last edited:
jsbeddow said:
BTW, I can confirm that I get the same error as elorimer for #3 (preview function). This is on my 86U, if that helps.

EDIT: I tried running the two suggested commands above, the first one returns nothing (blank line). The second one returns the expected IPs and MAC addresses, in order (no issue spotted there).
Click to expand...
It is different commands for the 86U. You can run this instead.
Code: 
awk '{print $0}' /jffs/nvram/dhcp_staticlist | sed 's/<//;s/>undefined//;s/>/ /g;s/</ /g'
 
jsbeddow said:
BTW, I can confirm that I get the same error as elorimer for #3 (preview function). This is on my 86U, if that helps.

EDIT: I tried running the two suggested commands above, the first one returns nothing (blank line). The second one returns the expected IPs and MAC addresses, in order (no issue spotted there).
Click to expand...
It is different commands for the 86U. You can run this instead.
Code: 
awk '{print $0}' /jffs/nvram/dhcp_staticlist | sed 's/<//;s/>undefined//;s/>/ /g;s/</ /g'
 
Hello,

Herewith my outputs because I'm struggling with the same issue with an AX88U.
Code: 
==> 3

Unexpected error condition dhcp_staticlist and dhcp_hostnames don't match
[: bad number
[: bad number

Press enter to continue

Code: 
admin@RT-AX88U-F5D0:/jffs/scripts# nvram get dhcp_hostnames | sed 's/<//;s/>undefined//;s/>/ /g;s/</ /g'

BLANK
Code: 
admin@RT-AX88U-F5D0:/jffs/scripts# nvram get dhcp_staticlist | sed 's/<//;s/>undefined//;s/>/ /g;s/</ /g'
0C:9D:92:50:89:30 192.168.50.2 0C:9D:92:52:E4:30 192.168.50.3 E0:3F:49:ED:EE:58 192.168.50.4 18:B4:30:98:B1:FA 192.168.50.10 18:B4:30:DA:79:7A 192.168.50.11 18:B4:30:6A:9B:62 192.168.50.12 18:B4:30:65:F5:4A 192.168.50.13 00:30:56:A4:50:86 192.168.50.14 00:17:88:28:0F:37 192.168.50.16 D8:80:39:89:03:93 192.168.50.17 B8:74:24:0A:9E:26 192.168.50.19 00:24:E4:0D:5D:46 192.168.50.20 F4:39:09:65:17:1D 192.168.50.21 00:11:32:9D:8A:50 192.168.50.22 B8:27:EB:F2:34:DB 192.168.50.31 C8:D0:83:B8:A3:56 192.168.50.33 40:CB:C0:D3:66:EA 192.168.50.35 EC:E5:12:13:39:F9 192.168.50.36 D4:A3:3D:84:16:AC 192.168.50.40 D4:A3:3D:73:52:EF 192.168.50.41 8C:85:90:39:D9:FB 192.168.50.50 18:65:90:9A:DB:6A 192.168.50.52 D8:CB:8A:A2:F5:8B 192.168.50.60 7C:8B:CA:1C:0A:AD 192.168.50.61 A0:99:9B:C2:9C:E1 192.168.50.62 00:B3:62:47:D1:90 192.168.50.63 D8:CB:8A:AA:A9:59 192.168.50.70 undefined 6C:8D:C1:BA:9E:75 192.168.50.72 88:E9:FE:87:69:E4 192.168.50.80 90:8D:6C:28:0E:F7 192.168.50.82 D8:1C:79:D1:2B:B8 192.168.50.83 08:F4:AB:9B:10:F5 192.168.50.84 B0:FC:0D:F6:BC:D4 192.168.50.85
Code: 
admin@RT-AX88U-F5D0:/jffs/scripts# awk '{print $0}' /jffs/nvram/dhcp_staticlist | sed 's/<//;s/>undefined//;s/
>/ /g;s/</ /g'
0C:9D:92:50:89:30 192.168.50.2 0C:9D:92:52:E4:30 192.168.50.3 E0:3F:49:ED:EE:58 192.168.50.4 18:B4:30:98:B1:FA 192.168.50.10 18:B4:30:DA:79:7A 192.168.50.11 18:B4:30:6A:9B:62 192.168.50.12 18:B4:30:65:F5:4A 192.168.50.13 00:30:56:A4:50:86 192.168.50.14 00:17:88:28:0F:37 192.168.50.16 D8:80:39:89:03:93 192.168.50.17 B8:74:24:0A:9E:26 192.168.50.19 00:24:E4:0D:5D:46 192.168.50.20 F4:39:09:65:17:1D 192.168.50.21 00:11:32:9D:8A:50 192.168.50.22 B8:27:EB:F2:34:DB 192.168.50.31 C8:D0:83:B8:A3:56 192.168.50.33 40:CB:C0:D3:66:EA 192.168.50.35 EC:E5:12:13:39:F9 192.168.50.36 D4:A3:3D:84:16:AC 192.168.50.40 D4:A3:3D:73:52:EF 192.168.50.41 8C:85:90:39:D9:FB 192.168.50.50 18:65:90:9A:DB:6A 192.168.50.52 D8:CB:8A:A2:F5:8B 192.168.50.60 7C:8B:CA:1C:0A:AD 192.168.50.61 A0:99:9B:C2:9C:E1 192.168.50.62 00:B3:62:47:D1:90 192.168.50.63 D8:CB:8A:AA:A9:59 192.168.50.70 undefined 6C:8D:C1:BA:9E:75 192.168.50.72 88:E9:FE:87:69:E4 192.168.50.80 90:8D:6C:28:0E:F7 192.168.50.82 D8:1C:79:D1:2B:B8 192.168.50.83 08:F4:AB:9B:10:F5 192.168.50.84 B0:FC:0D:F6:BC:D4 192.168.50.85

Thanks.
 
You seem to reference a variable that is only set for exception conditions:

Code: 
if [ "$word_count_staticlist" -ne "$word_count_hostnames" ]; then
echo "Unexpected error condition dhcp_staticlist and dhcp_hostnames don't match"
else
# count number of static leases. This is the number of loops required to get IP address and client name
# divide word_count by 2 since client information is listed in groups of 2 fields: MAC_Address and IP_Address
static_leases_count=$((word_count_staticlist / 2))
fi

while [ "$loop_count" -le "$static_leases_count" ]; do
 
There is also an "undefined" in the output @Olivier provided which should have been removed with the one liner awk and sed statement @Xentrk provided.

When I tested, the "undefined" was the problem, once removed the script worked fine.
 
Xentrk said:
It is different commands for the 86U. You can run this instead.
Code: 
awk '{print $0}' /jffs/nvram/dhcp_staticlist | sed 's/<//;s/>undefined//;s/>/ /g;s/</ /g'
Click to expand...
Does this show anything or help? AC86U with 384.13
Code: 
@RT-AC86U-4608:/tmp/home/root# awk '{print $0}' /jffs/nvram/dhcp_staticlist | sed 's/<//;s/>undefined//;s/>/ /g;s/</ /g'

50:9A:4C:3A:6B:4A 192.168.1.5 44:80:EB:AE:83:97 192.168.1.6 D8:50:E6:34:1B:DA 192.168.1.7 24:1F:A0:CE:07:67 192.168.1.8 DC:0B:34:B9:D4:15 192.168.1.9 28:C6:3F:33:7F:E3 192.168.1.10 74:C2:46:81:2C:76 192.168.1.11 B4:F1:DA:EC:0A:7E 192.168.1.12 FC:2A:9C:AF:C7:9C 192.168.1.14 68:FE:F7:3E:68:8F 192.168.1.15 98:46:0A:35:8F:8F 192.168.1.16 30:05:5C:56:40:2E 192.168.1.40 44:09:B8:40:BC:27 192.168.1.51 A0:6A:44:07:E9:58 192.168.1.62 A0:6A:44:02:06:62 192.168.1.63 E6:F0:42:23:8E:80 192.168.1.101 22:DF:B9:77:16:CC 192.168.1.102 20:DF:B9:9D:C4:AF 192.168.1.105 E4:F0:42:5D:0A:11 192.168.1.106 E4:F0:42:38:84:D4 192.168.1.107 50:C7:BF:FB:28:87 192.168.1.120 50:C7:BF:FB:11:9D 192.168.1.121 50:C7:BF:5E:65:39 192.168.1.122 00:24:E4:6D:1F:4C 192.168.1.150 38:F9:D3:DC:0F:1C 192.168.1.17
 
Olivier said:
Hello,


Code: 
admin@RT-AX88U-F5D0:/jffs/scripts# awk '{print $0}' /jffs/nvram/dhcp_staticlist | sed 's/<//;s/>undefined//;s/
>/ /g;s/</ /g'
0C:9D:92:50:89:30 192.168.50.2 0C:9D:92:52:E4:30 192.168.50.3 E0:3F:49:ED:EE:58 192.168.50.4 18:B4:30:98:B1:FA 192.168.50.10 18:B4:30:DA:79:7A 192.168.50.11 18:B4:30:6A:9B:62 192.168.50.12 18:B4:30:65:F5:4A 192.168.50.13 00:30:56:A4:50:86 192.168.50.14 00:17:88:28:0F:37 192.168.50.16 D8:80:39:89:03:93 192.168.50.17 B8:74:24:0A:9E:26 192.168.50.19 00:24:E4:0D:5D:46 192.168.50.20 F4:39:09:65:17:1D 192.168.50.21 00:11:32:9D:8A:50 192.168.50.22 B8:27:EB:F2:34:DB 192.168.50.31 C8:D0:83:B8:A3:56 192.168.50.33 40:CB:C0:D3:66:EA 192.168.50.35 EC:E5:12:13:39:F9 192.168.50.36 D4:A3:3D:84:16:AC 192.168.50.40 D4:A3:3D:73:52:EF 192.168.50.41 8C:85:90:39:D9:FB 192.168.50.50 18:65:90:9A:DB:6A 192.168.50.52 D8:CB:8A:A2:F5:8B 192.168.50.60 7C:8B:CA:1C:0A:AD 192.168.50.61 A0:99:9B:C2:9C:E1 192.168.50.62 00:B3:62:47:D1:90 192.168.50.63 D8:CB:8A:AA:A9:59 192.168.50.70 undefined 6C:8D:C1:BA:9E:75 192.168.50.72 88:E9:FE:87:69:E4 192.168.50.80 90:8D:6C:28:0E:F7 192.168.50.82 D8:1C:79:D1:2B:B8 192.168.50.83 08:F4:AB:9B:10:F5 192.168.50.84 B0:FC:0D:F6:BC:D4 192.168.50.85

Thanks.
Click to expand...
Thanks for the information. Shouldn't be seeing the "undefined" in the output above for /jffs/nvram/dhcp_staticlist. The sed command is looking for ">undefined" and replacing it with a space if found.

Please run the command below and tell me if a "<" or ">" or another character is being used as a field separator between the IP address 192.168.50.70 and the word "undefined"
Code: 
awk '{print $0}' /jffs/nvram/dhcp_staticlist

Note: I patched the [:bad number ] message and updated the error message. I kept processing if the error condition was reached rather than returning to the main menu.
 
Last edited:
Butterfly Bones said:
Does this show anything or help? AC86U with 384.13
Click to expand...
The /jffs/nvram/dhcp_hostnames output looks okay to me. I don't see the "undefined" word which will cause a difference in word count between dhcp_staticlist and dhcp_hostnames if it's not removed.
 
Jack Yaz said:
You seem to reference a variable that is only set for exception conditions:

Code: 
if [ "$word_count_staticlist" -ne "$word_count_hostnames" ]; then
echo "Unexpected error condition dhcp_staticlist and dhcp_hostnames don't match"
else
# count number of static leases. This is the number of loops required to get IP address and client name
# divide word_count by 2 since client information is listed in groups of 2 fields: MAC_Address and IP_Address
static_leases_count=$((word_count_staticlist / 2))
fi

while [ "$loop_count" -le "$static_leases_count" ]; do
Click to expand...
/jffs/nvram/dhcp_staticlist is in the format <mac>ip<mac>ip and so on

It may also contain the value "undefined": <mac>ip>undefined<mac>ip and so on

/jffs/nvram/dhcp_hostnames is in the format <mac>hostname<mac>hostname

So if I strip out the field separators and the word "undefined" and check that the word count of the two files match.

I patched the code to return to the menu if the error condition was reached. The bad number was a result of continuing to process the data even though there was a word count mismatch between dhcp_staticlist and dhcp_hostnames.

What I was surprised about is to see the nvram value dhcp_staticlist populated for HND routers. I thought HND were using /jffs/nvram/dhcp_staticlist instead. :confused: I'll have to research this. I thought the use of /jffs/nvram was to save nvram space. I'll need to update the code to also restore the nvram dhcp_staticlist in addition to the /jffs/nvram/dhcp_staticlist file for HND routers.

The output that @Olivier posted shows the "undefined" appearing in /jffs/nvram/dhcp_staticlist but not nvram value dhcp_staticlist.
 
I removed the greater than sign field separator before the word "undefined" as the other two commands handle the "<" and ">" separators. So no matter if the field separator is a < or > sign, the function works.

Code: 
awk '{print $0}' /jffs/nvram/dhcp_staticlist | sed 's/<//;s/undefined//;s/>/ /g;s/</ /g'

I pushed a new update to GitHub if you want to retest.
 
Xentrk said:
Thanks for the information. Shouldn't be seeing the "undefined" in the output above for /jffs/nvram/dhcp_staticlist. The sed command is looking for ">undefined" and replacing it with a space if found.

Please run the command below and tell me if a "<" or ">" or another character is being used as a field separator between the IP address 192.168.50.70 and the word "undefined"
Code: 
awk '{print $0}' /jffs/nvram/dhcp_staticlist

Note: I patched the [:bad number ] message and updated the error message. I kept processing if the error condition was reached rather than returning to the main menu.
Click to expand...
Hi @Xentrk ,

Herewith the output requested:
Code: 
admin@RT-AX88U-F5D0:/tmp/home/root# awk '{print $0}' /jffs/nvram/dhcp_staticlist
<0C:9D:92:50:89:30>192.168.50.2<0C:9D:92:52:E4:30>192.168.50.3<E0:3F:49:ED:EE:58>192.168.50.4<18:B4:30:98:B1:FA>192.168.50.10<18:B4:30:DA:79:7A>192.168.50.11<18:B4:30:6A:9B:62>192.168.50.12<18:B4:30:65:F5:4A>192.168.50.13<00:30:56:A4:50:86>192.168.50.14<00:17:88:28:0F:37>192.168.50.16<D8:80:39:89:03:93>192.168.50.17<B8:74:24:0A:9E:26>192.168.50.19<00:24:E4:0D:5D:46>192.168.50.20<F4:39:09:65:17:1D>192.168.50.21<00:11:32:9D:8A:50>192.168.50.22<B8:27:EB:F2:34:DB>192.168.50.31<C8:D0:83:B8:A3:56>192.168.50.33<40:CB:C0:D3:66:EA>192.168.50.35<EC:E5:12:13:39:F9>192.168.50.36<D4:A3:3D:84:16:AC>192.168.50.40<D4:A3:3D:73:52:EF>192.168.50.41<8C:85:90:39:D9:FB>192.168.50.50<18:65:90:9A:DB:6A>192.168.50.52<D8:CB:8A:A2:F5:8B>192.168.50.60>undefined<7C:8B:CA:1C:0A:AD>192.168.50.61<A0:99:9B:C2:9C:E1>192.168.50.62>undefined<00:B3:62:47:D1:90>192.168.50.63<D8:CB:8A:AA:A9:59>192.168.50.70>undefined<6C:8D:C1:BA:9E:75>192.168.50.72<88:E9:FE:87:69:E4>192.168.50.80<90:8D:6C:28:0E:F7>192.168.50.82<D8:1C:79:D1:2B:B8>192.168.50.83<08:F4:AB:9B:10:F5>192.168.50.84<B0:FC:0D:F6:BC:D4>192.168.50.85
admin@RT-AX88U-F5D0:/tmp/home/root#

Also after updated your script, this is the output:
Code: 
Use this utility to save or restore dhcp_staticlist and dhcp_hostnames nvram values

[1] - Save nvram dhcp_staticlist and dhcp_hostnames to /opt/tmp/
[2] - Restore nvram dhcp_staticlist and dhcp_hostnames from /opt/tmp/
[3] - Preview dhcp_staticlist and dhcp_hostnames in dnsmasq format
[4] - Append dhcp_staticlist and dhcp_hostnames to dnsmasq.conf.add & Disable DHCP Manual Assignment
[5] - Disable DHCP Manual Assignment
[6] - Enable DHCP Manual Assignment
[7] - Backup nvram dhcp_staticlist and dhcp_hostnames to /opt/tmp/ and clear nvram values
[8] - Display character size of dhcp_staticlist and dhcp_hostnames (2999 is the limit)
[e] - Exit

==> 3

Error condition! dhcp_staticlist and dhcp_hostnames word count do not match

Press enter to continue
Cheers.
 
Are you assuming that every manually assigned DHCP address has a hostname? Along the way that identity got broken, so I have about 50 or so DHCP assignments, but only a handful of hostnames remain. Perhaps that is why the error condition?

I have to figure out where I've ended up. Every entry in the Client List reached from the network map has a "Client Name", some of which were what I entered a long time ago as hostnames in the manual assignment list, and some of which are supplied in some other way. That Client Name also shows up in the manual assignment list if you click on the icon. But that is different from the Host Name, which for most of the entries in the manual table is blank.
 
elorimer said:
Are you assuming that every manually assigned DHCP address has a hostname? Along the way that identity got broken, so I have about 50 or so DHCP assignments, but only a handful of hostnames remain. Perhaps that is why the error condition?
Click to expand...

You are correct. I did make that assumption that there will be an equivalent hostname for every dhcp static lease reservation. That explains why the word count check is failing. It appears that specifying the host names in the dhcp-host parameter in dnsmasq is optional. So I can probably remove the check to see if the word count matches between dhcp_staticlist and dhcp_hostnames.

--dhcp-host=[<hwaddr>][,id:<client_id>|*][,set:<tag>][,<ipaddr>][,<hostname>][,<lease_time>][,ignore]
Specify per host parameters for the DHCP server. This allows a machine with a particular hardware address to be always allocated the same hostname, IP address and lease time. A hostname specified like this overrides any supplied by the DHCP client on the machine. It is also allowable to omit the hardware address and include the hostname, in which case the IP address and lease times will apply to any machine claiming that name. For example --dhcp-host=00:20:e0:3b:13:af,wap,infinite tells dnsmasq to give the machine with hardware address 00:20:e0:3b:13:af the name wap, and an infinite DHCP lease. --dhcp-host=lap,192.168.0.199 tells dnsmasq to always allocate the machine lap the IP address 192.168.0.199.
Click to expand...
 
Olivier said:
Hi @Xentrk ,

Herewith the output requested:
Code: 
admin@RT-AX88U-F5D0:/tmp/home/root# awk '{print $0}' /jffs/nvram/dhcp_staticlist
<0C:9D:92:50:89:30>192.168.50.2<0C:9D:92:52:E4:30>192.168.50.3<E0:3F:49:ED:EE:58>192.168.50.4<18:B4:30:98:B1:FA>192.168.50.10<18:B4:30:DA:79:7A>192.168.50.11<18:B4:30:6A:9B:62>192.168.50.12<18:B4:30:65:F5:4A>192.168.50.13<00:30:56:A4:50:86>192.168.50.14<00:17:88:28:0F:37>192.168.50.16<D8:80:39:89:03:93>192.168.50.17<B8:74:24:0A:9E:26>192.168.50.19<00:24:E4:0D:5D:46>192.168.50.20<F4:39:09:65:17:1D>192.168.50.21<00:11:32:9D:8A:50>192.168.50.22<B8:27:EB:F2:34:DB>192.168.50.31<C8:D0:83:B8:A3:56>192.168.50.33<40:CB:C0:D3:66:EA>192.168.50.35<EC:E5:12:13:39:F9>192.168.50.36<D4:A3:3D:84:16:AC>192.168.50.40<D4:A3:3D:73:52:EF>192.168.50.41<8C:85:90:39:D9:FB>192.168.50.50<18:65:90:9A:DB:6A>192.168.50.52<D8:CB:8A:A2:F5:8B>192.168.50.60>undefined<7C:8B:CA:1C:0A:AD>192.168.50.61<A0:99:9B:C2:9C:E1>192.168.50.62>undefined<00:B3:62:47:D1:90>192.168.50.63<D8:CB:8A:AA:A9:59>192.168.50.70>undefined<6C:8D:C1:BA:9E:75>192.168.50.72<88:E9:FE:87:69:E4>192.168.50.80<90:8D:6C:28:0E:F7>192.168.50.82<D8:1C:79:D1:2B:B8>192.168.50.83<08:F4:AB:9B:10:F5>192.168.50.84<B0:FC:0D:F6:BC:D4>192.168.50.85
admin@RT-AX88U-F5D0:/tmp/home/root#

Also after updated your script, this is the output:
Code: 
Use this utility to save or restore dhcp_staticlist and dhcp_hostnames nvram values

[1] - Save nvram dhcp_staticlist and dhcp_hostnames to /opt/tmp/
[2] - Restore nvram dhcp_staticlist and dhcp_hostnames from /opt/tmp/
[3] - Preview dhcp_staticlist and dhcp_hostnames in dnsmasq format
[4] - Append dhcp_staticlist and dhcp_hostnames to dnsmasq.conf.add & Disable DHCP Manual Assignment
[5] - Disable DHCP Manual Assignment
[6] - Enable DHCP Manual Assignment
[7] - Backup nvram dhcp_staticlist and dhcp_hostnames to /opt/tmp/ and clear nvram values
[8] - Display character size of dhcp_staticlist and dhcp_hostnames (2999 is the limit)
[e] - Exit

==> 3

Error condition! dhcp_staticlist and dhcp_hostnames word count do not match

Press enter to continue
Cheers.
Click to expand...
Thank you! Appears the field separator is what I code for <mac>ip>undefined<mac>ip<mac>ip and so on...

I think @elorimer discovered the issue. Not all static IP reservations have an equivalent hostname! I now know where to focus to handle the condition.
 
You must log in or register to reply here.

Similar threads

W
Tutorial Minimal backup and restore
Replies
3
Views
2K
Alaska99
Alaska99
A
Segmentation Fault message after entering long string into nvram (static leases)
Replies
0
Views
420
Aziron5
A
bengalih
Network Map "Client List" moving elsewhere due to low NVRAM
Replies
14
Views
2K
bengalih
bengalih
M
AC86U - SSH Disabled few seconds after boot - 386.14.
Replies
0
Views
160
miazza
M
J
files to restore dhcp reservations
Replies
2
Views
1K
jata
J
Similar threads
Thread starter Title Forum Replies Date
H DHCP server change Pool Starting Address Asuswrt-Merlin 4
K Your isp dhcp is not functioning properly Asuswrt-Merlin 5
C What is the difference between DNS Director and DHCP > manually assign DNS to each client? Asuswrt-Merlin 3
Q Does merlin reset router when assigning DHCP manual IP by MAC? Asuswrt-Merlin 11
V Hostname DHCP reservation list is too long. Asuswrt-Merlin 19
S Moving DHCP to Pi-Hole Asuswrt-Merlin 2
C LAN > DHCP List - Manually Assigned Name + Icon DONT SAVE Asuswrt-Merlin 4
garycnew [SOLUTION] WAN_Connection: ISP's DHCP did not function properly Asuswrt-Merlin 6
Philip Bondi Intermittent problem with DHCP offering 10.x addresses when configured for 192.x Asuswrt-Merlin 3
C Need some help with a DHCP problem Asuswrt-Merlin 9

Similar threads

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Members online

Total: 787 (members: 25, guests: 762)
Top