[DSL-AC68U] AsusWrt Merlin builds for DSL routers

[asmith]

Thanks for the fast response. I set it up just fine without any problems. But the VPN's policy routing only have device-based setup.

 

[Sam Sok]

Hello, my DSL speeds have increased 30% on my Australian ISP TPG with this new software. Very happy with that.

Just having some strange behavior when I select Client View List on the home page which doesn't list all clients and seems to change the number of items every few seconds.

Can anyone please clarify why there are two TRX editions available to install? I've used the edition that is the largest of the two, and has DSL listed twice in it's name.

Thanks to all !!!

 

[RedFox]

Curious to know if those who have installed GNUton/Merlin on DSL-AC68U and turned on AIMesh with SSH- have managed to get the Node to show up in the interface?

Can discover/connect when first linking it and appears to work (internet from LAN on node) and appears to function just doesn’t show the Node or any connected clients.

I know its not supported but if anyone has played it would be good to know.

Thanks all

 

[kernol]

Hello, my DSL speeds have increased 30% on my Australian ISP TPG with this new software. Very happy with that.

Just having some strange behavior when I select Client View List on the home page which doesn't list all clients and seems to change the number of items every few seconds.

Can anyone please clarify why there are two TRX editions available to install? I've used the edition that is the largest of the two, and has DSL listed twice in it's name.

Thanks to all !!!

It's an ASUS bug - well documented in the Merlin Changelog and elsewhere in this forum and the in Asus Wifi Router's one - been there for a long time but will hopefully be fixed by Asus one year !

 

[princi]

Hello, my DSL speeds have increased 30% on my Australian ISP TPG with this new software. Very happy with that.

I thought you had to use a TPG modem if you had a TPG service?

They don't support BYO modems - at least, that's what I heard.

 

[Sam Sok]

I thought you had to use a TPG modem if you had a TPG service?

They don't support BYO modems - at least, that's what I heard.

No, I've been using non-TPG modems for years on their ADSL.

 

[princi]

No, I've been using non-TPG modems for years on their ADSL.

I think it only applies to the NBN.

 

[kernol]

@GNUton I may have just uncovered a glitch in the firmware - maybe not?

Has anyone using this firmware installed Diversion and enabled the weekly Stats option under Diversion Menu c 2 2 ??
I have had Diversion running for well over a month or so successfully on the DSL-AC68U - but until yesterday, had not invoked the Stats option as above.

The result was some errors which I have not encountered before on my RT-AC5300 running the normal version of MerlinWare [384-10-2].
See attached file for screen grab of the error messages displayed in the terminal after invoking Stats within Diversion.

There is a thread where the issue has been discussed so far here ...
https://www.snbforums.com/threads/b...diversion-statistics.56393/page-9#post-488124

Keen to hear from anyone who has no problem with the stats - that way we can clear the @GNUton firmware - and identify the problem elsewhere.

 

[GNUton]

@GNUton I may have just uncovered a glitch in the firmware - maybe not?

Has anyone using this firmware installed Diversion and enabled the weekly Stats option under Diversion Menu c 2 2 ??
I have had Diversion running for well over a month or so successfully on the DSL-AC68U - but until yesterday, had not invoked the Stats option as above.

The result was some errors which I have not encountered before on my RT-AC5300 running the normal version of MerlinWare [384-10-2].
See attached file for screen grab of the error messages displayed in the terminal after invoking Stats within Diversion.

There is a thread where the issue has been discussed so far here ...
https://www.snbforums.com/threads/b...diversion-statistics.56393/page-9#post-488124

Keen to hear from anyone who has no problem with the stats - that way we can clear the @GNUton firmware - and identify the problem elsewhere.

Hi,
I have installed diversion and enabled the stats option (menu: c 2 2 1) and it doesn't show any error for me.

 

[Sam Sok]

@GNUton I may have just uncovered a glitch in the firmware - maybe not?

Has anyone using this firmware installed Diversion and enabled the weekly Stats option under Diversion Menu c 2 2 ??
I have had Diversion running for well over a month or so successfully on the DSL-AC68U - but until yesterday, had not invoked the Stats option as above.

The result was some errors which I have not encountered before on my RT-AC5300 running the normal version of MerlinWare [384-10-2].
See attached file for screen grab of the error messages displayed in the terminal after invoking Stats within Diversion.

There is a thread where the issue has been discussed so far here ...
https://www.snbforums.com/threads/b...diversion-statistics.56393/page-9#post-488124

Keen to hear from anyone who has no problem with the stats - that way we can clear the @GNUton firmware - and identify the problem elsewhere.

I use PIHOLE so I think no need for Diversion??

 

[thelonelycoder]

I use PIHOLE so I think no need for Diversion??

You are missing the point. The question is not what ad-blocker to use but that one user has an unknown problem with my ad-blocker.
Which, by the way, runs on the very router this threads firmware is installed on. For users understanding the significance of this your comment is moot.

 

[thelonelycoder]

Keen to hear from anyone who has no problem with the stats - that way we can clear the @GNUton firmware - and identify the problem elsewhere.

Can you post the stats.div.log here, you can view it with sf in Diversion.

 

[thelonelycoder]

There is a thread where the issue has been discussed so far here ...
https://www.snbforums.com/threads/b...diversion-statistics.56393/page-9#post-488124

Going back to post in that other thread, this is not a GNUton problem.

 

[kernol]

Hi,
I have installed diversion and enabled the stats option (menu: c 2 2 1) and it doesn't show any error for me.

Many thanks - pleased to have eliminated your rock steady firmware as a possible cause of the problem .

 

[matrycy]

Hi,
Just updated yestarday, everything is working fine except: I'm not able to store port forwarding setting. I can add but as soon as change the tab or logout the settings are gone. There is no apply or save button on port forwarding tab.

 

[kernol]

Hi,
Just updated yestarday, everything is working fine except: I'm not able to store port forwarding setting. I can add but as soon as change the tab or logout the settings are gone. There is no apply or save button on port forwarding tab.

That's strange because I have no less than 10 Port Forward rules saved permanently in my DSL-AC68U running GNUton 4.
To Add them - simply click "Add Profile" button at the foot of the Port Forward Page - then when all required info is entered in the Custom Configuration fields - simply click "OK" button and confirm that the rule has been added to the list.

Nothing further to do in my case - and the Port Forward rules stick!

 

[DaVoodoo]

Hi,
Just updated yestarday, everything is working fine except: I'm not able to store port forwarding setting. I can add but as soon as change the tab or logout the settings are gone. There is no apply or save button on port forwarding tab.

Mine also seems to work 100%

 

[bits]

I think it only applies to the NBN.

You can use byo VDSL modems for TPG fttn.

Providers often do not support byo modems, that does not mean they do not work.

 

[GNUton]

I have just released the new firmware 384.11-gnuton1 for DSL-AC68.
Enjoy.

 

[boylee]

I have just released the new firmware 384.11-gnuton1 for DSL-AC68.
Enjoy.

Thanks for your continued work... have just uploaded this latest firmware & noticed on the network map page clients are not listed ie: clients = 0; everything seems to be functioning as it should thou.