What's new

Dual WAN setup, please help

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

yelo3

Regular Contributor
I'm trying to setup dual WAN with a 3g usb stick.
When I plug the USB stick, the router (AC56U) recognizes it, and the UMTS light starts to blink, so I think that it should be working.

I configured it using the fail over (see screnshot)
I tried to test the configuration by disconnecting the ADSL cable from my external modem, but it didn't suceed
I also tried to disconnect the ethernet cable from the wan port, but the 3g modem is never used.

Any help?
Thank you in advance
 

Attachments

  • 2016-04-26 11_04_57-ASUS Wireless Router RT-AC56U - Dual WAN.png
    2016-04-26 11_04_57-ASUS Wireless Router RT-AC56U - Dual WAN.png
    327.5 KB · Views: 586
3g usb stick.
first question is the usb stick on the compatibility list for asus

have you tried setting the usb stick as the primary wan and making sure you actually have internet connectivity

you also understand fallover is not instantaneous
 
Well, actually it is not supported.
I thought it was because of the blue light that indicates the presence of UMTS signal...
Also it works with another router by Vodafone.

Any one using ZTE K3806-Z - Vodafone, maybe it needs just a trick?
 
First try your modem as primary source of internet. I'm more then sure that it just doesn't work with Asus router.
 
I've tried to configure it as primary WAN, but asus router tells me that there's no SIM card
 
How can I manually test it through ssh?
I found guides about using wvdial, but it's not currently installed
 
Actually the device works:

Code:
comgt -d /dev/ttyACM1
SIM ready
Waiting for Registration..(120 sec max)
Registered on Home network: "vodafone IT",2
Signal Quality: 3,0

Any help on how to connect manually?
 
A problem might be that it is trying to use /dev/ttyACM0, see usb.log
Code:
No or unknown response.
done.
Incorrect SIM card or can't input the correct PIN/PUK code.
VAR: modem_enable(1) modem_autoapn(0) modem_act_node(ttyACM0) modem_type(tty) modem_vid(6610) modem_pid(4117)
     modem_isp(Vodafone) modem_apn(web.omnitel.it)
PIN: detect PIN if it's needed.
No or unknown response.
done.
Incorrect SIM card or can't input the correct PIN/PUK code.
 

Similar threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Members online

Top