Menu
What's new
By:
Filters Better Search

Entware-ng for arm, mipsel ....

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

ASAT said:
Is it possible to compile a simple C program without the Entware-ng dependency?
Click to expand...
No. source /opt/bin/gcc_env.sh and compile as in wiki
Code: 
source /opt/bin/gcc_env.sh
gcc $CFLAGS $LDFLAGS hello.c -o hello
 
Thank you. I compiled my little C program and it runs fine.

If I needed to build a statically linked version of some program on the router, is this possible? I've cross-compiled Entware-ng on my laptop and it appears to have built all the static libraries (the ".a" files). Can these be used on the router with Entware-gcc to statically link the C runtime?
 
ASAT said:
Thank you. I compiled my little C program and it runs fine.

If I needed to build a statically linked version of some program on the router, is this possible? I've cross-compiled Entware-ng on my laptop and it appears to have built all the static libraries (the ".a" files). Can these be used on the router with Entware-gcc to statically link the C runtime?
Click to expand...
Just try and report here. Statical linking can be tricky with glibc. Try not to use ld, use gcc. ld does not know where to find some static libs.
Other problems can arise from running statically linked glibc binary in uclibc environment.
 
zyxmon said:
An illustrated guide on installing Entware-ng (mipsel & armv7)
https://www.hqt.ro/how-to-install-new-generation-entware/

Thank you TeHashX
Click to expand...

very nice tutorial for installing....thank you all for your help on this project....i will be very happy if @zyxmon, @ryzhov_al or any others can made similar program to install for blocking incoming connection for single IP or ranges of IP....i am trying with some tutorials here from forum but i never didn`t get working....
 
bayern1975 said:
i will be very happy if @zyxmon, @ryzhov_al or any others can made similar program to install for blocking incoming connection for single IP or ranges of IP....i am trying with some tutorials here from forum but i never didn`t get working....
Click to expand...
"De Bayern san a stures voik und wuin nix söba lerna!" :rolleyes:
 
You are fooling around with me, but I really need that....
 
Entware-ng is synchronized with Openwrt. Changelog - https://github.com/Entware-ng/Entware-ng/wiki/Changelog#december-2015-first-decade

Patches from openembeded.org for glibc 2.22 applied (arm feed).
Uclibc-ng upgraded to 1.0.9 and patches from https://github.com/wl500g applyed (mipsel feed)
Entware system libraries will be automatically upgraded.

Two packages that were only in Entware-ng are now in Openwrt with slightly different names (pyasn1->python-pyasn1; zope.interface->zope-inteface) . If you have installed deluge (arm feed) it is better to run thees commands to upgrade.
Code: 
opkg update
opkg remove --force-depends pyasn1
opkg remove --force-depends zope.interface
opkg upgrade

If you have not installed deluge, simply run

Code: 
opkg update
opkg upgrade
 
Last edited:
zyxmon said:
Two packages that were only in Entware-ng are now in Openwrt with slightly different names (pyasn1->python-pyasn1; zope.interface->zope-inteface) . If you have installed deluge (arm feed) it is better to run thees commands to upgrade.
Code: 
opkg update
opkg delete - force-depends pyasn1
opkg delete - force-depends zope.interface
opkg upgrade
Click to expand...
The syntax above did not work on my two Asus routers to delete the packages. The better syntax is:
Code: 
opkg update
opkg remove --force-depends pyasn1
opkg remove --force-depends zope.interface
opkg upgrade
With kind regards
Joe :cool:
 
I took the plunge while bored with bunch of noise and only had access to a phone + SSH. The upgrade process was generally smooth. Configs for a few packages were overwritten. I thought I kept a log but seems I didn't...sorry.

Thanks for the nice work!
 
Hi, is there a way to install Entware-NG environment on OpenWRT? It would be quite useful since not all the packages are manteined on OpenWRT (aMule for example)
 
I had entware-ng running on my AC-56u but recently been unable to run an opkg update.
The error returned as follow:

root@myAsus:/tmp/home/root# opkg update
Downloading http://pkg.entware.net/binaries/armv7/Packages.gz.
wget: can't connect to remote host (81.4.123.217): Connection timed out
Collected errors:
* opkg_download: Failed to download http://pkg.entware.net/binaries/armv7/Packages.gz, wget returned 1.

I've also tried editing opkg.conf to use the address provided in the OP but same error.

I've read somewhere that it could be caused by mis-configured routing table. The following are the output for netstat -rn, traceroute & ifconfig. Would need someone to advise on how to solve this.
By the way, I have debian wheezy installed and there's no problem running apt-get in debian.
I have a static ip

root@myAsus:/tmp/home/root# traceroute 81.4.123.217
traceroute to 81.4.123.217 (81.4.123.217), 30 hops max, 38 byte packets
1 172.22.0.1 (172.22.0.1) 3.356 ms 1.977 ms 1.678 ms
2 103-6-148-37.myrepublic.com.sg (103.6.148.37) 1.212 ms 1.130 ms 38.111 ms
3 103-6-148-13.myrepublic.com.sg (103.6.148.13) 3.449 ms 5.633 ms 2.566 ms
4 116.51.27.101 (116.51.27.101) 2.467 ms 1.792 ms 2.743 ms
5 ae-0.r21.sngpsi05.sg.bb.gin.ntt.net (129.250.4.73) 2.204 ms 3.078 ms 1.761 ms
6 ae-8.r22.londen03.uk.bb.gin.ntt.net (129.250.7.64) 186.218 ms 186.174 ms 183.385 ms
7 ae-1.r02.londen03.uk.bb.gin.ntt.net (129.250.5.25) 182.934 ms 184.720 ms 181.819 ms
8 ae-3.r02.londen05.uk.bb.gin.ntt.net (129.250.2.119) 182.729 ms 181.730 ms 183.842 ms
9 82.112.115.130 (82.112.115.130) 259.755 ms 277.147 ms 255.949 ms
10 ae01.core01.lon10.uk.as5580.net (78.152.54.63) 258.172 ms * ae08.core02.lon01.uk.as5580.net (78.152.44.162) 260.367 ms
11 ae01.core02.ams02.nl.as5580.net (78.152.53.229) 262.379 ms 250.542 ms 253.088 ms
12 ae01.edge01.ams01.nl.as5580.net (78.152.45.66) 262.172 ms 251.155 ms 251.292 ms
13 as5580-gw.dataplace.nl.weservit.net (78.152.46.79) 189.037 ms ae01.edge01.ams01.nl.as5580.net (78.152.45.66) 258.942 ms 266.437 ms
14 as5580-gw.dataplace.nl.weservit.net (78.152.46.79) 190.444 ms 198.939 ms 199.593 ms
15 * * *
16 * * *
^C

root@myAsus:/tmp/home/root# netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
101.100.184.1 0.0.0.0 255.255.255.255 UH 0 0 0 vlan2
0.0.0.0 10.0.0.1 255.255.255.0 UG 0 0 0 br0
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
10.0.1.0 10.0.0.2 255.255.255.0 UG 0 0 0 br0
10.0.2.0 10.0.0.8 255.255.255.0 UG 0 0 0 br0
101.100.184.0 0.0.0.0 255.255.255.0 U 0 0 0 vlan2
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 101.100.184.1 0.0.0.0 UG 0 0 0 vlan2

root@myAsus:/tmp/home/root# ifconfig
br0 Link encap:Ethernet HWaddr 14:XX:XX:XX:08
inet addr:10.0.0.1 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8076 errors:0 dropped:0 overruns:0 frame:0
TX packets:8800 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1057406 (1.0 MiB) TX bytes:4944087 (4.7 MiB)

eth0 Link encap:Ethernet HWaddr 14:XX:XX:XX:08
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:22276362 errors:0 dropped:0 overruns:0 frame:0
TX packets:24526744 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2866215110 (2.6 GiB) TX bytes:3923831461 (3.6 GiB)
Interrupt:179 Base address:0x4000

eth1 Link encap:Ethernet HWaddr 14:XX:XX:XX:08
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:41265
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:163

eth2 Link encap:Ethernet HWaddr 14:XX:XX:XX:0C
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:105 errors:0 dropped:0 overruns:0 frame:2294479
TX packets:122 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16017 (15.6 KiB) TX bytes:35086 (34.2 KiB)
Interrupt:169

ifb0 Link encap:Ethernet HWaddr 1A:XX:XX:XX:CB
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:1077443 errors:0 dropped:0 overruns:0 frame:0
TX packets:1077443 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:950745768 (906.7 MiB) TX bytes:950745768 (906.7 MiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1%1076468424/128 Scope:Host
UP LOOPBACK RUNNING MULTICAST MTU:16436 Metric:1
RX packets:1510 errors:0 dropped:0 overruns:0 frame:0
TX packets:1510 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:132792 (129.6 KiB) TX bytes:132792 (129.6 KiB)

vlan1 Link encap:Ethernet HWaddr 14:XX:XX:XX:08
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7968 errors:0 dropped:0 overruns:0 frame:0
TX packets:8796 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1077529 (1.0 MiB) TX bytes:4975062 (4.7 MiB)

vlan2 Link encap:Ethernet HWaddr 14:XX:XX:XX:09
inet addr:101.100.184.132 Bcast:101.100.184.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1413 errors:0 dropped:0 overruns:0 frame:0
TX packets:1212 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:167590 (163.6 KiB) TX bytes:136964 (133.7 KiB)
 
The entware server (or its ISP) might have issue with IPs originated from Asia. Don't know why...

People with a Europe or America IP seem doing fine.
 
This has been solved already.
Please see my discussion with ryzhov_al at https://github.com/Entware-ng/Entware-ng/issues/133.
liquidwax said:
I had entware-ng running on my AC-56u but recently been unable to run an opkg update.
The error returned as follow:

root@myAsus:/tmp/home/root# opkg update
Downloading http://pkg.entware.net/binaries/armv7/Packages.gz.
wget: can't connect to remote host (81.4.123.217): Connection timed out
Collected errors:
* opkg_download: Failed to download http://pkg.entware.net/binaries/armv7/Packages.gz, wget returned 1.

I've also tried editing opkg.conf to use the address provided in the OP but same error.

I've read somewhere that it could be caused by mis-configured routing table. The following are the output for netstat -rn, traceroute & ifconfig. Would need someone to advise on how to solve this.
By the way, I have debian wheezy installed and there's no problem running apt-get in debian.
I have a static ip

root@myAsus:/tmp/home/root# traceroute 81.4.123.217
traceroute to 81.4.123.217 (81.4.123.217), 30 hops max, 38 byte packets
1 172.22.0.1 (172.22.0.1) 3.356 ms 1.977 ms 1.678 ms
2 103-6-148-37.myrepublic.com.sg (103.6.148.37) 1.212 ms 1.130 ms 38.111 ms
3 103-6-148-13.myrepublic.com.sg (103.6.148.13) 3.449 ms 5.633 ms 2.566 ms
4 116.51.27.101 (116.51.27.101) 2.467 ms 1.792 ms 2.743 ms
5 ae-0.r21.sngpsi05.sg.bb.gin.ntt.net (129.250.4.73) 2.204 ms 3.078 ms 1.761 ms
6 ae-8.r22.londen03.uk.bb.gin.ntt.net (129.250.7.64) 186.218 ms 186.174 ms 183.385 ms
7 ae-1.r02.londen03.uk.bb.gin.ntt.net (129.250.5.25) 182.934 ms 184.720 ms 181.819 ms
8 ae-3.r02.londen05.uk.bb.gin.ntt.net (129.250.2.119) 182.729 ms 181.730 ms 183.842 ms
9 82.112.115.130 (82.112.115.130) 259.755 ms 277.147 ms 255.949 ms
10 ae01.core01.lon10.uk.as5580.net (78.152.54.63) 258.172 ms * ae08.core02.lon01.uk.as5580.net (78.152.44.162) 260.367 ms
11 ae01.core02.ams02.nl.as5580.net (78.152.53.229) 262.379 ms 250.542 ms 253.088 ms
12 ae01.edge01.ams01.nl.as5580.net (78.152.45.66) 262.172 ms 251.155 ms 251.292 ms
13 as5580-gw.dataplace.nl.weservit.net (78.152.46.79) 189.037 ms ae01.edge01.ams01.nl.as5580.net (78.152.45.66) 258.942 ms 266.437 ms
14 as5580-gw.dataplace.nl.weservit.net (78.152.46.79) 190.444 ms 198.939 ms 199.593 ms
15 * * *
16 * * *
^C

root@myAsus:/tmp/home/root# netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
101.100.184.1 0.0.0.0 255.255.255.255 UH 0 0 0 vlan2
0.0.0.0 10.0.0.1 255.255.255.0 UG 0 0 0 br0
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
10.0.1.0 10.0.0.2 255.255.255.0 UG 0 0 0 br0
10.0.2.0 10.0.0.8 255.255.255.0 UG 0 0 0 br0
101.100.184.0 0.0.0.0 255.255.255.0 U 0 0 0 vlan2
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 101.100.184.1 0.0.0.0 UG 0 0 0 vlan2

root@myAsus:/tmp/home/root# ifconfig
br0 Link encap:Ethernet HWaddr 14:XX:XX:XX:08
inet addr:10.0.0.1 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8076 errors:0 dropped:0 overruns:0 frame:0
TX packets:8800 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1057406 (1.0 MiB) TX bytes:4944087 (4.7 MiB)

eth0 Link encap:Ethernet HWaddr 14:XX:XX:XX:08
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:22276362 errors:0 dropped:0 overruns:0 frame:0
TX packets:24526744 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2866215110 (2.6 GiB) TX bytes:3923831461 (3.6 GiB)
Interrupt:179 Base address:0x4000

eth1 Link encap:Ethernet HWaddr 14:XX:XX:XX:08
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:41265
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:163

eth2 Link encap:Ethernet HWaddr 14:XX:XX:XX:0C
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:105 errors:0 dropped:0 overruns:0 frame:2294479
TX packets:122 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16017 (15.6 KiB) TX bytes:35086 (34.2 KiB)
Interrupt:169

ifb0 Link encap:Ethernet HWaddr 1A:XX:XX:XX:CB
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:1077443 errors:0 dropped:0 overruns:0 frame:0
TX packets:1077443 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:950745768 (906.7 MiB) TX bytes:950745768 (906.7 MiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1%1076468424/128 Scope:Host
UP LOOPBACK RUNNING MULTICAST MTU:16436 Metric:1
RX packets:1510 errors:0 dropped:0 overruns:0 frame:0
TX packets:1510 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:132792 (129.6 KiB) TX bytes:132792 (129.6 KiB)

vlan1 Link encap:Ethernet HWaddr 14:XX:XX:XX:08
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7968 errors:0 dropped:0 overruns:0 frame:0
TX packets:8796 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1077529 (1.0 MiB) TX bytes:4975062 (4.7 MiB)

vlan2 Link encap:Ethernet HWaddr 14:XX:XX:XX:09
inet addr:101.100.184.132 Bcast:101.100.184.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1413 errors:0 dropped:0 overruns:0 frame:0
TX packets:1212 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:167590 (163.6 KiB) TX bytes:136964 (133.7 KiB)
Click to expand...
 
Entware-ng is synchronized with Openwrt. Binary repos were updated yesterday. One of the new packages is node. The name of the package is node or node_legacy - it depends on the feed/architecture.
Few remarks on node
1. You may need to add swap not to get OOM errors
2. Your HOME environment variable should point to usb storage. npm creates a huge cache in HOME dir.
3. You may need to run `npm config set registry http://registry.npmjs.org` before you use npm install
4. If you update npm with `npm -g install npm@latest` you may need to edit shebang in `/opt/lib/node_modules/npm/bin/npm-cli.js` (replace `/bin/usr/env node` with `/opt/bin/node`)

arm node_legacy package is already in binary repo. mipsel version will in repo soon, after more tests by ryzhov_al.
 
You must log in or register to reply here.

Similar threads

garycnew
Entware [SOLUTION] Cross-Compile ProxyChains-NG Entware Package via Debian Live DVD
2
Replies
22
Views
3K
sfx2000
sfx2000
garycnew
Entware [SOLUTION] Cross-Compile xxHash Entware Package via Debian Live DVD
Replies
0
Views
2K
garycnew
garycnew
garycnew
Entware [SOLUTION] Cross-Compile Nyx (Tor Command-Line Monitor) Entware Package via Debian Live DVD
Replies
0
Views
2K
garycnew
garycnew
garycnew
Entware [SOLUTION] Cross-Compile OnionShare Entware Package via Debian Live DVD
Replies
0
Views
1K
garycnew
garycnew
garycnew
Entware [SOLUTION] Cross-Compile Torsocks Entware Package via Debian Live DVD
Replies
3
Views
3K
heysoundude
heysoundude
Similar threads
Thread starter Title Forum Replies Date
M AC68U - RTL2832U and Entware Asuswrt-Merlin 5
W Question: About AX4200 regarding SSH support and Entware Asuswrt-Merlin 23
D How would you go about syncing/symlinking root home folder to entware drive during system operation? Asuswrt-Merlin 12
J Low-Power SSD for amtm, Diversion, Entware and Tailscale on the USB 2.0 Port (USB 3.0 configured as USB 2.0) Asuswrt-Merlin 130
J Format required for external drive with scripts + entware? Asuswrt-Merlin 7
C Entware doesn't get mounted after reboot on DSL-AC68U Asuswrt-Merlin 0

Similar threads

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Members online

Total: 799 (members: 21, guests: 778)
Top