Menu
What's new
By:
Filters Better Search

Guest network (IoT) and network time

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

drinkingbird said:
Never tried but you should be able to access it via SSH I would assume.

Not sure why that value changed for you and not me. I don't know what uses it. Maybe it turns back to 0 after a reboot. For now I'd ignore it and try changing wl0.1 to 0 and see if you can now ping between devices.
Click to expand...

Real quick before I do that, I was able to SSH into the node router (AX58U). This one has different values for nvram isolate. Lol

Code: 
@RT-AX58U-8670:/tmp/home/root# nvram show | grep -i isolate
size: 79304 bytes (51768 left)
wl0.1_ap_isolate=0
wl0.2_ap_isolate=1
wl0.3_ap_isolate=0
wl0.4_ap_isolate=0
wl0.5_ap_isolate=0
wl0_ap_isolate=0
wl1.1_ap_isolate=0
wl1.2_ap_isolate=0
wl1.3_ap_isolate=0
wl1_ap_isolate=0
wl_ap_isolate=0
jorg@RT-AX58U-8670:/tmp/home/root#
 
Perhaps I need to reboot them. I don't think I did that after I enabled guest wifi.
 
jorgsmash said:
Perhaps I need to reboot them. I don't think I did that after I enabled guest wifi.
Click to expand...

Yes reboot after enabling guest, mentioned that in my previous post.

I just tested on mine and immediately after issuing
wl -i wl1.1 ap_isolate 0

My 5ghz devices could ping each other, and after changing it back it was immediately blocked again. So no need to restart wireless. However as I mentioned, that command will only work when scripted, it won't survive a reboot I don't think. The NVRAM variable will survive a reboot, however any settings changes can reset it back to 1.
 
drinkingbird said:
Yes reboot after enabling guest, mentioned that in my previous post.

I just tested on mine and immediately after issuing
wl -i wl1.1 ap_isolate 0

My 5ghz devices could ping each other, and after changing it back it was immediately blocked again. So no need to restart wireless. However as I mentioned, that command will only work when scripted, it won't survive a reboot I don't think. The NVRAM variable will survive a reboot, however any settings changes can reset it back to 1.
Click to expand...
So all I need to do is add
wl -i wl0.1 ap_isolate 0

To a script in /jffs/scripts/ and it will run every boot? For instance, my 'init-start' script:

Code: 
# cat init-start
#!/bin/sh
/jffs/scripts/init2-start
sh /jffs/addons/unbound/stuning start                   # unbound_manager

wl -i wl0.1 ap_isolate 0                                            # Allow guest clients to talk to each other

[ -x /jffs/addons/AdGuardHome.d/AdGuardHome.sh ] && /jffs/addons/AdGuardHome.d/AdGuardHome.sh init-start &
jorg@RT-AX88U-F610:/jffs/scripts#

And I need to do that on both routers?
 
Crap, even after a reboot, running 'nvram show | grep -i isolate' on the mesh node AX58U it still doesn't seem like this is going to work.


Code: 
AX58U-8670:/jffs/scripts# nvram show | grep -i isolate
size: 79378 bytes (51694 left)
wl0.1_ap_isolate=0
wl0.2_ap_isolate=1
wl0.3_ap_isolate=0
wl0.4_ap_isolate=0
wl0.5_ap_isolate=0
wl0_ap_isolate=0
wl1.1_ap_isolate=0
wl1.2_ap_isolate=0
wl1.3_ap_isolate=0
wl1_ap_isolate=0
wl_ap_isolate=0
jorg@RT-AX58U-8670:/jffs/scripts#

The node router isn't recognizing the "Allow access to Intranet" setting is disabled on the main router. And it has wl0.2 set to isolate for some reason.
 
jorgsmash said:
So all I need to do is add
wl -i wl0.1 ap_isolate 0

To a script in /jffs/scripts/ and it will run every boot? For instance, my 'init-start' script:

Code: 
# cat init-start
#!/bin/sh
/jffs/scripts/init2-start
sh /jffs/addons/unbound/stuning start                   # unbound_manager

wl -i wl0.1 ap_isolate 0                                            # Allow guest clients to talk to each other

[ -x /jffs/addons/AdGuardHome.d/AdGuardHome.sh ] && /jffs/addons/AdGuardHome.d/AdGuardHome.sh init-start &
jorg@RT-AX88U-F610:/jffs/scripts#

And I need to do that on both routers?
Click to expand...

You'll need to test which script it works best with, you may want to make it pretty late in the process such as services-start. Don't forget to make it executable.

Yes you'd need to run it on both. You'll need to monitor and see if anything changes it back (updating settings in the GUI likely will so just remember to reboot if needed after doing that). But if it seems to change on its own without you having changed anything, you'll probably need to look to put it into a service-event or service-event-end script. Or maybe update the NVRAM variable too so that when stuff changes it sees that and uses it. Probably can't hurt to update it regardless on each boot.
 
jorgsmash said:
Crap, even after a reboot, running 'nvram show | grep -i isolate' on the mesh node AX58U it still doesn't seem like this is going to work.


Code: 
AX58U-8670:/jffs/scripts# nvram show | grep -i isolate
size: 79378 bytes (51694 left)
wl0.1_ap_isolate=0
wl0.2_ap_isolate=1
wl0.3_ap_isolate=0
wl0.4_ap_isolate=0
wl0.5_ap_isolate=0
wl0_ap_isolate=0
wl1.1_ap_isolate=0
wl1.2_ap_isolate=0
wl1.3_ap_isolate=0
wl1_ap_isolate=0
wl_ap_isolate=0
jorg@RT-AX58U-8670:/jffs/scripts#

The node router isn't recognizing the "Allow access to Intranet" setting is disabled on the main router. And it has wl0.2 set to isolate for some reason.
Click to expand...

Put it in a later script and make sure the script is executable and being run.

Ignore wl0.2. You aren't using it. It's just a leftover value. WL0.1 and WL1.1 are both set to 0 above so looks good. What's the issue?

ONLY guest wireless 1 (wl0.1 and wl1.1) is propagated to the node. 2 and 3 are not part of aimesh, don't use those.
 
drinkingbird said:
Put it in a later script and make sure the script is executable and being run.

Ignore wl0.2. You aren't using it. It's just a leftover value. WL0.1 and WL1.1 are both set to 0 above so looks good. What's the issue?

ONLY guest wireless 1 (wl0.1 and wl1.1) is propagated to the node. 2 and 3 are not part of aimesh, don't use those.
Click to expand...
The issue is that wl0.1_ap_isolate=0 is set to 0 on the node router without me having changed anything. I haven't issued the command to change it from a 1 to a 0 yet, and I haven't added it to any scripts. It's just set that way by default even though I have guest network on, set to sync to mesh nodes, and I have access to Intranet disabled. So on the main router, it is still set to 1 (because I haven't changed it yet), and on the node router, it's set to 0 already.
 
Unfortunately I don't think this is going to work with AI mesh. I issued the commands, and connected my mac to the guest network and I am not able to ping any of the devices on the guest network.

Code: 
# wl -i wl0.1 ap_isolate 0
jorg@RT-AX88U-F610:/jffs/scripts# nvram show | grep -i isolate
wl0.1_ap_isolate=1
wl0.2_ap_isolate=0
wl0.3_ap_isolate=0
wl0.4_ap_isolate=0
wl0_ap_isolate=0
wl1.1_ap_isolate=0
wl1.2_ap_isolate=0
wl1.3_ap_isolate=0
size: 87668 bytes (43404 left)
wl1_ap_isolate=0
wl_ap_isolate=1
jorg@RT-AX88U-F610:/jffs/scripts# nvram set wl0.1_ap_isolate=0
jorg@RT-AX88U-F610:/jffs/scripts# nvram show | grep -i isolate
wl0.1_ap_isolate=0
size: 87668 bytes (43404 left)
wl0.2_ap_isolate=0
wl0.3_ap_isolate=0
wl0.4_ap_isolate=0
wl0_ap_isolate=0
wl1.1_ap_isolate=0
wl1.2_ap_isolate=0
wl1.3_ap_isolate=0
wl1_ap_isolate=0
wl_ap_isolate=1

jorg@RT-AX88U-F610:/jffs/scripts# nvram commit
jorg@RT-AX88U-F610:/jffs/scripts# service restart-wireless

Done.
jorg@RT-AX88U-F610:/jffs/scripts# nvram show | grep -i isolate
wl0.1_ap_isolate=0
wl0.2_ap_isolate=0
wl0.3_ap_isolate=0
wl0.4_ap_isolate=0
wl0_ap_isolate=0
size: 87668 bytes (43404 left)
wl1.1_ap_isolate=0
wl1.2_ap_isolate=0
wl1.3_ap_isolate=0
wl1_ap_isolate=0
wl_ap_isolate=1
jorg@RT-AX88U-F610:/jffs/scripts#


Code: 
% ping 192.168.101.36
PING 192.168.101.36 (192.168.101.36): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
Request timeout for icmp_seq 4
^C
--- 192.168.101.36 ping statistics ---
6 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.223
PING 192.168.101.223 (192.168.101.223): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
^C
--- 192.168.101.223 ping statistics ---
4 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.87
PING 192.168.101.87 (192.168.101.87): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
^C
--- 192.168.101.87 ping statistics ---
4 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.87
PING 192.168.101.87 (192.168.101.87): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
^C
--- 192.168.101.87 ping statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.87
PING 192.168.101.87 (192.168.101.87): 56 data bytes
ping: sendto: No route to host
ping: sendto: Host is down
Request timeout for icmp_seq 0
ping: sendto: Host is down
Request timeout for icmp_seq 1
ping: sendto: Host is down
Request timeout for icmp_seq 2
ping: sendto: Host is down
Request timeout for icmp_seq 3
ping: sendto: Host is down
Request timeout for icmp_seq 4
ping: sendto: Host is down
Request timeout for icmp_seq 5
^C
--- 192.168.101.87 ping statistics ---
7 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.87
PING 192.168.101.87 (192.168.101.87): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
ping: sendto: No route to host
Request timeout for icmp_seq 4
^C
--- 192.168.101.87 ping statistics ---
6 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.36
PING 192.168.101.36 (192.168.101.36): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
Request timeout for icmp_seq 4
Request timeout for icmp_seq 5
Request timeout for icmp_seq 6
^C
--- 192.168.101.36 ping statistics ---
8 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.5
PING 192.168.101.5 (192.168.101.5): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
^C
--- 192.168.101.5 ping statistics ---
4 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.5
PING 192.168.101.5 (192.168.101.5): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
^C
--- 192.168.101.5 ping statistics ---
4 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.5
PING 192.168.101.5 (192.168.101.5): 56 data bytes
ping: sendto: No route to host
Request timeout for icmp_seq 0
ping: sendto: Host is down
Request timeout for icmp_seq 1
ping: sendto: Host is down
Request timeout for icmp_seq 2
ping: sendto: Host is down
Request timeout for icmp_seq 3
^C
--- 192.168.101.5 ping statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=400<CHANNEL_IO>
    ether b8:f6:b1:17:67:2b
    inet 192.168.101.191 netmask 0xffffff00 broadcast 192.168.101.255
    media: autoselect
    status: active

jorgsmash@SmackMac ~ % ping 192.168.101.5
PING 192.168.101.5 (192.168.101.5): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
^C
--- 192.168.101.5 ping statistics ---
4 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ %
 
jorgsmash said:
Unfortunately I don't think this is going to work with AI mesh. I issued the commands, and connected my mac to the guest network and I am not able to ping any of the devices on the guest network.

Code: 
# wl -i wl0.1 ap_isolate 0
jorg@RT-AX88U-F610:/jffs/scripts# nvram show | grep -i isolate
wl0.1_ap_isolate=1
wl0.2_ap_isolate=0
wl0.3_ap_isolate=0
wl0.4_ap_isolate=0
wl0_ap_isolate=0
wl1.1_ap_isolate=0
wl1.2_ap_isolate=0
wl1.3_ap_isolate=0
size: 87668 bytes (43404 left)
wl1_ap_isolate=0
wl_ap_isolate=1
jorg@RT-AX88U-F610:/jffs/scripts# nvram set wl0.1_ap_isolate=0
jorg@RT-AX88U-F610:/jffs/scripts# nvram show | grep -i isolate
wl0.1_ap_isolate=0
size: 87668 bytes (43404 left)
wl0.2_ap_isolate=0
wl0.3_ap_isolate=0
wl0.4_ap_isolate=0
wl0_ap_isolate=0
wl1.1_ap_isolate=0
wl1.2_ap_isolate=0
wl1.3_ap_isolate=0
wl1_ap_isolate=0
wl_ap_isolate=1

jorg@RT-AX88U-F610:/jffs/scripts# nvram commit
jorg@RT-AX88U-F610:/jffs/scripts# service restart-wireless

Done.
jorg@RT-AX88U-F610:/jffs/scripts# nvram show | grep -i isolate
wl0.1_ap_isolate=0
wl0.2_ap_isolate=0
wl0.3_ap_isolate=0
wl0.4_ap_isolate=0
wl0_ap_isolate=0
size: 87668 bytes (43404 left)
wl1.1_ap_isolate=0
wl1.2_ap_isolate=0
wl1.3_ap_isolate=0
wl1_ap_isolate=0
wl_ap_isolate=1
jorg@RT-AX88U-F610:/jffs/scripts#


Code: 
% ping 192.168.101.36
PING 192.168.101.36 (192.168.101.36): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
Request timeout for icmp_seq 4
^C
--- 192.168.101.36 ping statistics ---
6 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.223
PING 192.168.101.223 (192.168.101.223): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
^C
--- 192.168.101.223 ping statistics ---
4 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.87
PING 192.168.101.87 (192.168.101.87): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
^C
--- 192.168.101.87 ping statistics ---
4 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.87
PING 192.168.101.87 (192.168.101.87): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
^C
--- 192.168.101.87 ping statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.87
PING 192.168.101.87 (192.168.101.87): 56 data bytes
ping: sendto: No route to host
ping: sendto: Host is down
Request timeout for icmp_seq 0
ping: sendto: Host is down
Request timeout for icmp_seq 1
ping: sendto: Host is down
Request timeout for icmp_seq 2
ping: sendto: Host is down
Request timeout for icmp_seq 3
ping: sendto: Host is down
Request timeout for icmp_seq 4
ping: sendto: Host is down
Request timeout for icmp_seq 5
^C
--- 192.168.101.87 ping statistics ---
7 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.87
PING 192.168.101.87 (192.168.101.87): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
ping: sendto: No route to host
Request timeout for icmp_seq 4
^C
--- 192.168.101.87 ping statistics ---
6 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.36
PING 192.168.101.36 (192.168.101.36): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
Request timeout for icmp_seq 4
Request timeout for icmp_seq 5
Request timeout for icmp_seq 6
^C
--- 192.168.101.36 ping statistics ---
8 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.5
PING 192.168.101.5 (192.168.101.5): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
^C
--- 192.168.101.5 ping statistics ---
4 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.5
PING 192.168.101.5 (192.168.101.5): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
^C
--- 192.168.101.5 ping statistics ---
4 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ping 192.168.101.5
PING 192.168.101.5 (192.168.101.5): 56 data bytes
ping: sendto: No route to host
Request timeout for icmp_seq 0
ping: sendto: Host is down
Request timeout for icmp_seq 1
ping: sendto: Host is down
Request timeout for icmp_seq 2
ping: sendto: Host is down
Request timeout for icmp_seq 3
^C
--- 192.168.101.5 ping statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ % ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=400<CHANNEL_IO>
    ether b8:f6:b1:17:67:2b
    inet 192.168.101.191 netmask 0xffffff00 broadcast 192.168.101.255
    media: autoselect
    status: active

jorgsmash@SmackMac ~ % ping 192.168.101.5
PING 192.168.101.5 (192.168.101.5): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
^C
--- 192.168.101.5 ping statistics ---
4 packets transmitted, 0 packets received, 100.0% packet loss
jorgsmash@SmackMac ~ %
Click to expand...

Like I said, with the NVRAM value you may have to reboot the router. With the WL command it takes effect immediately.

If you issue the WL command with no value you can see what it is currently set to, probably still 1 until you reboot. Or use the WL command to set it and it takes effect immediately.
 
jorgsmash said:
The issue is that wl0.1_ap_isolate=0 is set to 0 on the node router without me having changed anything. I haven't issued the command to change it from a 1 to a 0 yet, and I haven't added it to any scripts. It's just set that way by default even though I have guest network on, set to sync to mesh nodes, and I have access to Intranet disabled. So on the main router, it is still set to 1 (because I haven't changed it yet), and on the node router, it's set to 0 already.
Click to expand...

May be one of your other addons interfering. Did you reboot the node after enabling Guest 1? Typically that is required (actually you have to reboot both usually).
 
drinkingbird said:
Like I said, with the NVRAM value you may have to reboot the router. With the WL command it takes effect immediately.

If you issue the WL command with no value you can see what it is currently set to, probably still 1 until you reboot. Or use the WL command to set it and it takes effect immediately.
Click to expand...
I used the WL command initially. It's in the code snip I posted above.

drinkingbird said:
May be one of your other addons interfering. Did you reboot the node after enabling Guest 1? Typically that is required (actually you have to reboot both usually).
Click to expand...
Yes I rebooted both of them after I enabled the guest 1. That is what I was referring to in post #25. I had enabled the guest 1 and rebooted both.
 
jorgsmash said:
I used the WL command initially. It's in the code snip I posted above.


Yes I rebooted both of them after I enabled the guest 1. That is what I was referring to in post #25. I had enabled the guest 1 and rebooted both.
Click to expand...

May be time to factory reset that node and re-join it. Maybe even both and start from scratch (configure by hand, re-add 3rd party stuff one at a time, etc). Are both on the same code base (388 or 386)? Probably want them matching as close as possible.

On mine as soon as I disable AP isolation the devices on the same band (both 5 or both 2.4) can talk to each other. Between bands won't be able to due to some firewall rules that are in place. You're certain the devices you were testing with respond to ping?
 
drinkingbird said:
May be time to factory reset that node and re-join it. Maybe even both and start from scratch (configure by hand, re-add 3rd party stuff one at a time, etc). Are both on the same code base (388 or 386)? Probably want them matching as close as possible.

On mine as soon as I disable AP isolation the devices on the same band (both 5 or both 2.4) can talk to each other. Between bands won't be able to due to some firewall rules that are in place. You're certain the devices you were testing with respond to ping?
Click to expand...
They are both on the latest firmware. In my signature. Are you using AI mesh?
 
jorgsmash said:
They are both on the latest firmware. In my signature. Are you using AI mesh?
Click to expand...
Sorry was talking in another thread where they said the AX5 series didn't support 388 code. If they're both on the same code, only suggestion at this point is to factory reset the whole thing and start over. Some of your addons (or maybe ones you've uninstalled) may be interfering. Maybe that wl_ap_isolate value is something to do with it, mine is set to 0 even though I have guest and isolation enabled.

No, not running aimesh, but you're saying it isn't even working off the main router so thats before even getting into the node and aimesh.

Edit - that user had a 56U not a 58U.
 
Last edited:
drinkingbird said:
Sorry was talking in another thread where they said the AX5 series didn't support 388 code. If they're both on the same code, only suggestion at this point is to factory reset the whole thing and start over. Some of your addons (or maybe ones you've uninstalled) may be interfering. Maybe that wl_ap_isolate value is something to do with it, mine is set to 0 even though I have guest and isolation enabled.

No, not running aimesh, but you're saying it isn't even working off the main router so thats before even getting into the node and aimesh.

Edit - that user had a 56U not a 58U.
Click to expand...
Thanks for your help. I haven't been able to figure anything that's going to work for my needs. Are you any good at IPtables?

Link to another post about IPtables

Cheers!
 
jorgsmash said:
Thanks for your help. I haven't been able to figure anything that's going to work for my needs. Are you any good at IPtables?

Link to another post about IPtables

Cheers!
Click to expand...

IPTABLES and even EBTABLES won't help with changing client isolation. Seems the user in the other thread resolved their issues with isolation (opposite issue, clients on Aimesh node were not isolated) by downgrading to 386 code. But like I said, your best bet is probably start from scratch, get it working (hopefully on 388, if not try 386) then start re-adding your 3rd party stuff an make sure it keeps working.
 
drinkingbird said:
IPTABLES and even EBTABLES won't help with changing client isolation. Seems the user in the other thread resolved their issues with isolation (opposite issue, clients on Aimesh node were not isolated) by downgrading to 386 code. But like I said, your best bet is probably start from scratch, get it working (hopefully on 388, if not try 386) then start re-adding your 3rd party stuff an make sure it keeps working.
Click to expand...
Thanks. I'll give it a shot when I find some time to screw the wifi up for an extended period of time lol.
 
drinkingbird said:
IPTABLES and even EBTABLES won't help with changing client isolation. Seems the user in the other thread resolved their issues with isolation (opposite issue, clients on Aimesh node were not isolated) by downgrading to 386 code. But like I said, your best bet is probably start from scratch, get it working (hopefully on 388, if not try 386) then start re-adding your 3rd party stuff an make sure it keeps working.
Click to expand...
Why would I not be able to use IPtables to block client traffic from accessing other devices on the LAN? Even if they are on the same subnet. I should be able to isolate devices by only allowing them Internet access and not be able to reach other clients on the same subnet.
 
jorgsmash said:
Why would I not be able to use IPtables to block client traffic from accessing other devices on the LAN? Even if they are on the same subnet. I should be able to isolate devices by only allowing them Internet access and not be able to reach other clients on the same subnet.
Click to expand...

IPtables only gets hit for routed traffic. Traffic in the same subnet is not routed. If the clients are on different interfaces but in the same subnet (as happens with guest 2 and 3) you can use ebtables. If they are on the same interface and same subnet, neither will get hit, AP isolation (which just blocks the shared connection used for broadcasts so clients can't ARP for each other or send MDNS etc) is the only option.

Note that AP isolation is only a basic security feature if using WPA2 since that has been cracked and anyone with a piece of software and a USB wifi card that supports promiscuous mode can still sniff the data being sent between AP and other clients. With WPA3 it is more secure.

With guest 1 and/or Yazfi you can use iptables to filter between subnets (but not within) since the guest is in a different interface and subnet from LAN and other guests.
 
Last edited:
You must log in or register to reply here.

Similar threads

N
Guest and IoT Network Configuration
Replies
4
Views
220
RandomUser777
R
M
Any workaround to expand Guest Network 'features' on Mesh for IoT Devices | AX86U
Replies
2
Views
418
ChatmanR
ChatmanR
OakleyFreak
Solved Guest network On VPN on 3004-388.8_2
Replies
2
Views
450
OakleyFreak
OakleyFreak
T
GT BE98 Pro Guest Network Cannot Disable Intranet Access
Replies
3
Views
239
bennor
B
Siff
Printing from Guest Network (ASUSWRT-Merlin 3004.388.8_2)
Replies
5
Views
624
Jherb
J
Similar threads
Thread starter Title Forum Replies Date
M Any workaround to expand Guest Network 'features' on Mesh for IoT Devices | AX86U Asuswrt-Merlin 2
R Disable Intranet access for a LAN port (not the WiFi Guest network)? Asuswrt-Merlin 10
T GT BE98 Pro Guest Network Cannot Disable Intranet Access Asuswrt-Merlin 3
Siff Printing from Guest Network (ASUSWRT-Merlin 3004.388.8_2) Asuswrt-Merlin 5
W Quick Network/Guest question Asuswrt-Merlin 14
R RT-AX86U Pro LAN Port on Guest Network Asuswrt-Merlin 9
OakleyFreak Solved Guest network On VPN on 3004-388.8_2 Asuswrt-Merlin 2
B Asus - RT-AX88U - USB Application - Network Place (Samba) Share / Cloud Disk - Problem when enabling Allow guest login Asuswrt-Merlin 4
wcoastsands RT-AX88U Guest Network connection issue when Access Intranet is set to Disable Asuswrt-Merlin 5
G Access webserver on lan synology from guest network on AX88u router Asuswrt-Merlin 1

Similar threads

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Members online

Total: 666 (members: 11, guests: 655)
Top