Help- Cannot assess router adminstration page

[leon]

Hello,

I realised today that I cannot access my router via by browser. I received the error "Firefox can’t establish a connection to the server at 192.168.1.1.". I have tried this will all my computers and phones. I also tried typing http://192.168.1.1 and https....

All my devices at home work well with full internet assess. I am able to SSH to the router. I did a ps and received

httpds -s -p 8443 -i br0

I am not sure what else can I do...

I am using Asus RT68U, running Merlin 380.64_2.

Thanks in advance.

 

[KevTech]

Did you try rebooting the router?

 

[TonyH]

Run command 'ipconfig /all' see whether ip address changed.
Also try ping the router.

 

[leon]

Did you try rebooting the router?

I did reboot the router. I also physically power off on the router.

Run command 'ipconfig /all' see whether ip address changed.
Also try ping the router.

Yes I can ping the router.

.

 

[KevTech]

Open a command prompt and ipconfig to see what address your default gateway is.

 

[leon]

Open a command prompt and ipconfig to see what address your default gateway is.

It is still 192.168.1.1.

 

[Zirescu]

Did you enable the allow only specified IP address on the UI?

 

[RMerlin]

HTTPS runs on port 8443, not the default 443 port. You have to provide that port:

https://192.168.1.1:8443

 

[leon]

Did you enable the allow only specified IP address on the UI?

I don't think so. Given that I can assess via SSH, is there a way for me to check?

 

[Zirescu]

Not sure what nvram value stores that entry. You could try disabling the https login to see if you can get back into the UI.
To disable https from telnet or ssh, use these commands:

nvram set http_enable=0
nvram commit
service restart_httpd

 

[szdaisy0228]

1.How often does this happen after your upgrade Firmware ?
2. what's the result of PS via ssh? only" httpds -s -p 8443 -i br0"?

 

[leon]

HTTPS runs on port 8443, not the default 443 port. You have to provide that port:

https://192.168.1.1:8443

Thank you This solves it!