Help me get ipv6 setup on router OS

[DanH]

Dangit thiggins I put this in the wrong section!!!! I am sorry can you move this to Other WAN and LAN?

I am using EdgeOS 6.38rc52.
I have Time Warner Cable (IPv6 works when using a ERL, so I know it is possible to get this working).
I am using interface E1WAN as WAN coming in from a CM600 cable modem.
I am using interface E2LAN as LAN going out to a Netgear switch, and then off to the rest of the network,
My firewall looks like this:

/ipv6 firewall filter
add chain=input connection-state=related
add chain=input connection-state=established
add chain=forward connection-state=established
add chain=input in-interface=E2LAN
add chain=forward connection-state=related
add chain=input dst-port=546 protocol=udp
add chain=input protocol=icmpv6
add chain=forward protocol=icmpv6
add chain=forward out-interface=E1WAN
add action=drop chain=input
add action=drop chain=forward

My IPv6 settings look like this:

I added a DHCPv6 Client and assigned the pool name TWC like this

The DHCPv6 client area looks like this:

part two below

 

[DanH]

The IPv6 Pool looks like this:

I created a new IPv6 address and assigned it to E2LAN (using the prefix from the client area in the address box, and TWC as the pool) looks like this:

My IPv6 Address List looks like this:

Now when I go to test IPv6 it fails with these results:

So my question is, what am I doing wrong? Thanks in advance for any help you can provide.

 

[DanH]

Got it working, not sure what I did that fixed it but it works now.