Help with Home Network Layout Question

[RBallin]

Current Setup:

1. Phone Company Router set in Bridge mode 1st Floor.
2. UDM Pro and 2xUSW-24port PoE switches in office 2nd floor.
3. Multiple Access Points (AP) and Multiple Camera’s (PoE)
4. Two (2) Cat7 cables running from floor 1 to floor 2.
4a. One (1) Cat7 cable runs from Phone Company Router to UDM Pro.
4a. UDM Pro connects to USW-24p-PoE switch.
4b. One (1) Cat7 cable runs back down from USW-PoE switch to a small USW-Flex 5port PoE switch.
(This is for a couple PoE camera’s, an AP, and an appleTV box.)

My Question is this. Can I eliminate the second cable run to/from the office on the second floor with a hardware solution placed in between the phone companies router and the UDM Pro?

Example. Phone Company Router to switch. Switch to UDM Pro. From Switch, cable runs to other USW-Flex switch controlling camera’s, AP, and appleTV.

If this is possible, what is the solution. If this is possible as stated above in my example. I would like to stay within the Ubiquiti brand however, all solutions will be welcomed.

Thanks in advance,
Richard

 

[degrub]

you would have to move the router to the location on 1st floor to eliminate the use of the one cable.
Why do you want to disuse the cable ?

 

[RBallin]

you would have to move the router to the location on 1st floor to eliminate the use of the one cable.
Why do you want to disuse the cable ?

It is more a cable management issue. As I rent, all cables are ran outside of walls. I currently use plastic cable management guides that have a double sided tape to keep them in place but I wanted to keep the clutter to a minimum. I wasn't sure if there was a hardware solution (Other than) moving the UDM Pro (router) to the first floor (as my networking skills are minimal at best) but thought i'd ask if there was a solution.
Thanks for the response. Looks like i'll be running multiple wires for now.

Have a great day!