HP Procurve config help

[quetrax]

Hi!
This is my first post here so bare with me.

I have a HP Procurve 2510-24g switch that up til now has been workin like an unmanaged switch.
My ISP has provided me with a cheap switch that splits up the VLAN´s for their services (Internet, TV and VOIP).My plan now is to remove their equipment and just use my HP Procurve.
I checked with my ISP and it was OK for them so they just gave me the VLAN info and said good luck.

Other equipment used is a Netgear R7000 router, will use this as a dhcp server and for wireless connections.

My ISP VLAN´s:
VLAN 101 = Internet
VLAN 102 = TV
VLAN 103 = VOIP

Local VLAN = 110

My plan was this:
Port1: WAN (from Fiber to Ethernet converter)
Port2: VLAN 101 (To my routers WAN port)
Port3: VLAN 103 (To my VOIP box)
Port4: VLAN 110 (Back from router)
Port5-24: Vlan 110 (LAN)

Will this work?
And what should be tagged and what should be untagged?

Thanks for any help!

 

[Cloud200]

Check with your ISP as to what needs to be tagged/untagged on port 1
port 2 untagged VLAN 101
port 3 unknown, test it both ways
port 4-24 untagged

How are the TVs connected?

 

[quetrax]

Thank you for you help. I will try this out.
I dont use TV from my ISP at the moment. Im using satellite now.

 

[coxhaus]

I would try to simulate their VLAN switch by just replacing it. A lot of understanding will be gained from this exercise. Once you understand the data streams you may be able to structure it the way you want.