Locked myself out

[n0x0n]

I want ssh to be only accessible from the inside plus from a certain outside IP range.
I added an IP restriction and ticked "ssh", but now seem to be locked out of my router:
I can no longer access my router via the web interface, nor via ssh from the inside (which seems logical since I forgot to add that range first), nor via ssh from the outside (which is logical too, since I had set sshd to LAN instead of LAN+WAN).

How can I resolve this?

 

[Raphie]

Hard reset via reset button

 

[n0x0n]

I'd like to try that as a last resort, as it would mean that my whole day configuring the device would be lost...

 

[thelonelycoder]

Are you familiar with shell script?
You could disable the access restriction by way of modifying one of the AB-Solution start files on the USB device.
You'd need a Linux box to plug the device in tough.

 

[n0x0n]

Ah, nice idea, sounds like this could work. Yep, I'm in a linux-only household
So I''d take the micro-sd card out, mount it and alter ... which one and in which manner?

 

[thelonelycoder]

I'm about to hit the hay, I'll post instructions in the morning.

 

[n0x0n]

Thank you and good night...

 

[n0x0n]

Was up early and made a reset, thank you anyway.
I got " --> Entware device change detected" when running AB-solution, but paths were corrected.
Strange, as I have verified that the microsd is mounted in the same place as before, it has a label... any idea why this happens?
The dnsmasq config was also not OK, but I finished re-installing AB-solution and entware, now everything owrks as designed

 

[thelonelycoder]

Was up early and made a reset, thank you anyway.
I got " --> Entware device change detected" when running AB-solution, but paths were corrected.
Strange, as I have verified that the microsd is mounted in the same place as before, it has a label... any idea why this happens?
The dnsmasq config was also not OK, but I finished re-installing AB-solution and entware, now everything owrks as designed

I have no idea what changed on your end, it checks the Entware path and if not found, finds and changes all necessary files, especially in /jffs/scripts.

Glad it works now. With access restriction set, start the AB-Solution UI, this will add a rule set for pixelserv-tls IP automatically.