Menu
What's new
By:
Filters Better Search

N14/N56/N65 QOS UP/DOWN + BFQ with Padavan's F/W builds

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

You don't need to change the script, but rather the config file. You can run the script directly from ssh session or reboot the router for changes to take effect. Unfortunately hardware nat has to be disabled completely so your speed will be crippled if you want qos.

Also for everyone, I haven't abandaned this, I am travelling in Europe and won't be back until june 5th-ish.
 
where i can download qos.conf

i have the RT-n56u and 3.0.3.8-082-moonman-2 installed i need the qos.conf to make copy and paste or download, i need your help, thanks
 
### Target Vendor/Product (support only Ralink RT3883/MT7620)
CONFIG_VENDOR=Ralink
CONFIG_PRODUCT=RT3883

### Target ProductID (board select, max 12 symbols)
CONFIG_FIRMWARE_PRODUCT_ID="RT-N56U"
#CONFIG_FIRMWARE_PRODUCT_ID="RT-N65U"
#CONFIG_FIRMWARE_PRODUCT_ID="SWR1100"
#CONFIG_FIRMWARE_PRODUCT_ID="BN750DB"

### Firmware version (3.K.X.X-YYY)
CONFIG_FIRMWARE_ROOTFS_VER="3.8"
CONFIG_FIRMWARE_BUILDS_VER="080-moonman-4"

### Linux kernel and toolchain
#CONFIG_LINUXDIR=linux-3.0.x
CONFIG_LINUXDIR=linux-3.4.x
CONFIG_TOOLCHAIN_DIR=/root/rt-n56u/toolchain-rt3883

############################################################
### Linux kernel configuration
############################################################

### Build ROOTFS_IN_RAM firmware mode (kernel+initramfs).
### Decreased firmware size, but more RAM used, slow boot.
### Also allow build image for load w/o flash from UART console
#CONFIG_FIRMWARE_TYPE_ROOTFS_IN_RAM=y

### Kernel driver select for WiFi AP 5GHz
### 2.4 = RT3883/3662 v2.4.3.6
### 2.7 = RT3883/3662 v2.7.1.6
CONFIG_FIRMWARE_WIFI5_DRIVER=2.7

### Kernel driver select for WiFi AP 2.4GHz
### 2.4 = RT3092 v2.4.0.5
### 2.5 = RT3092 v2.5.0.11
### 2.7 = RT3092 v2.7.1.5
CONFIG_FIRMWARE_WIFI2_DRIVER=2.7

### Enable IPv6 support
CONFIG_FIRMWARE_ENABLE_IPV6=y

### Enable BFQ I/O scheduler
CONFIG_FIRMWARE_ENABLE_BFQ=y

### Enable NTFS filesystem support via Paragon "ufsd" driver. ~0.4MB
CONFIG_FIRMWARE_ENABLE_UFSD=y

### Enable FAT/FAT32 filesystem support. ~0.1MB
#CONFIG_FIRMWARE_ENABLE_FAT=y

### Enable exFAT (FAT/FAT32 too) filesystem support. ~0.12MB
CONFIG_FIRMWARE_ENABLE_EXFAT=y

### Enable EXT2 filesystem support. ~0.1MB
#CONFIG_FIRMWARE_ENABLE_EXT2=y

### Enable EXT3 filesystem support. ~0.2MB
#CONFIG_FIRMWARE_ENABLE_EXT3=y

### Enable EXT4 (EXT3/2 too) filesystem support. ~0.4MB
CONFIG_FIRMWARE_ENABLE_EXT4=y

### Enable XFS filesystem support. ~0.6MB
#CONFIG_FIRMWARE_ENABLE_XFS=y

### Enable FUSE (filesystems in userspace) support. ~0.1MB
CONFIG_FIRMWARE_ENABLE_FUSE=y

### Enable swap files/partitions support. ~0.05MB
CONFIG_FIRMWARE_ENABLE_SWAP=y

### Include UVC camera modules. ~0.2MB
CONFIG_FIRMWARE_INCLUDE_UVC=y

### Include USB-HID modules. ~0.2MB
#CONFIG_FIRMWARE_INCLUDE_HID=y

### Include USB-Serial modules (e.g. pl2303). ~0.03MB
CONFIG_FIRMWARE_INCLUDE_SERIAL=y

### Include network QoS scheduling modules. ~0.2MB
CONFIG_FIRMWARE_INCLUDE_QOS=y

### Include IMQ module for shapers (a bit of performance degradation). ~0.02MB
CONFIG_FIRMWARE_INCLUDE_IMQ=y

### Include IFB module for shapers. ~0.03MB
CONFIG_FIRMWARE_INCLUDE_IFB=y

### Include IPSet utility and kernel modules. ~0.4MB
CONFIG_FIRMWARE_INCLUDE_IPSET=y

### Include NFSv3 server. ~0.6MB
CONFIG_FIRMWARE_INCLUDE_NFSD=y

### Include NFSv3 client. ~0.5MB
CONFIG_FIRMWARE_INCLUDE_NFSC=y

### Include CIFS (SMB) client. ~0.2MB
#CONFIG_FIRMWARE_INCLUDE_CIFS=y

############################################################
### Userspace configuration
############################################################

### Include WebUI international resources. Increased firmware size
#CONFIG_FIRMWARE_INCLUDE_LANG_BR=y
#CONFIG_FIRMWARE_INCLUDE_LANG_CZ=y
#CONFIG_FIRMWARE_INCLUDE_LANG_DA=y
#CONFIG_FIRMWARE_INCLUDE_LANG_DE=y
#CONFIG_FIRMWARE_INCLUDE_LANG_ES=y
#CONFIG_FIRMWARE_INCLUDE_LANG_FI=y
#CONFIG_FIRMWARE_INCLUDE_LANG_FR=y
#CONFIG_FIRMWARE_INCLUDE_LANG_NO=y
#CONFIG_FIRMWARE_INCLUDE_LANG_PL=y
#CONFIG_FIRMWARE_INCLUDE_LANG_RU=y
#CONFIG_FIRMWARE_INCLUDE_LANG_SV=y

### Include LPR printer daemon. ~0.12MB
CONFIG_FIRMWARE_INCLUDE_LPRD=y

### Include USB-over-Ethernet printer daemon. ~0.05MB
CONFIG_FIRMWARE_INCLUDE_U2EC=y

### Include "tcpdump" utility. ~0.6MB
CONFIG_FIRMWARE_INCLUDE_TCPDUMP=y

### Include "hdparm" utility (allow set HDD spindown timeout and APM). ~0.1MB
CONFIG_FIRMWARE_INCLUDE_HDPARM=y

### Include "parted" utility (allow make GPT partitions). ~0.3MB
#CONFIG_FIRMWARE_INCLUDE_PARTED=y

### Include SMB server. ~1.5MB
CONFIG_FIRMWARE_INCLUDE_SMBD=y

### Include syslog for SMB server. ~0.3MB
#CONFIG_FIRMWARE_INCLUDE_SMBD_SYSLOG=y

### Include FTP server. ~0.2MB
CONFIG_FIRMWARE_INCLUDE_FTPD=y

### Include EAP-TTLS and EAP-PEAP authentication support, openssl ~1.2MB, wpa_supplicant +0.04MB
CONFIG_FIRMWARE_INCLUDE_EAP_PEAP=y

### Include HTTPS support. openssl ~1.2MB
CONFIG_FIRMWARE_INCLUDE_HTTPS=y

### Include sftp-server. openssl ~1.2MB, sftp-server ~0.06MB
CONFIG_FIRMWARE_INCLUDE_SFTP=y

### Include dropbear SSH. ~0.3MB
CONFIG_FIRMWARE_INCLUDE_DROPBEAR=y

### Make the dropbear symmetrical ciphers and hashes faster. ~0.06MB
CONFIG_FIRMWARE_INCLUDE_DROPBEAR_FAST_CODE=y

### Include OpenSSH instead of dropbear. openssl ~1.2MB, openssh ~1.0MB
#CONFIG_FIRMWARE_INCLUDE_OPENSSH=y

### Include OpenVPN. IPv6 required. openssl ~1.2MB, openvpn ~0.4MB
CONFIG_FIRMWARE_INCLUDE_OPENVPN=y

### Include "openssl" executable for generate certificates. ~0.4MB
#CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y

### Include xUPNPd IPTV mediaserver. ~0.3MB
CONFIG_FIRMWARE_INCLUDE_XUPNPD=y

### Include Minidlna UPnP mediaserver. ~1.6MB
CONFIG_FIRMWARE_INCLUDE_MINIDLNA=y

### Include Firefly iTunes mediaserver. ~1.0MB
#CONFIG_FIRMWARE_INCLUDE_FIREFLY=y

### Include ffmpeg 0.11.x instead of 0.6.x for Minidlna and Firefly. ~0.1MB
CONFIG_FIRMWARE_INCLUDE_FFMPEG_NEW=y

### Include Transmission torrent. openssl ~1.2MB, transmission ~1.5MB
#CONFIG_FIRMWARE_INCLUDE_TRANSMISSION=y
 
I don't understand what you need. This firmware is not just qos.sh + qos.conf. It has all the necessary modules build into the kernel for the script to work. Even if you transfer the files over to offical Padavan's builds it will not work.

If you came from Padavan's firmware and you see no qos.conf in the router then you didn't follow the instructions and need to reset Internal storage:

If NOT coming from stock f/w, reset internal storage after flashing:
Advanced Settings -> Administration -> Settings ->
Router Internal Storage (/etc/storage) -> Reset
Click to expand...
 
Looks like Andy Padavan merged my changed to add gcc4.8 . Now it is officially supported. I'll try to get him to merge the qos part.
 
It isn't part of the original Padavan's config. Is it something that you want for yourself?
 
There should be enough flash space on N14 so I don't see why not. Should be available next build and only on N14 (if it compiles ;) )
 
New builds are up.
- ftdi_sio driver is built as a module for N14
- N65 builds are now full builds
 
Last edited:
Just FYI I included ftdi_sio in all builds. If you don't need it, there is no point in redownloading the new versions (083-moonman-3) - everything else is exactly the same. Padavan hasn't committed anything new. Also QOS feature, it seems, will never be in official builds :( so I'm gonna have to keep making these builds for QOS functionality.
 
Hi!

Just flashed the latest build on my 56U. But I don't see the clients list anymore. Is that a known issue?

Thanks!
 
You must log in or register to reply here.

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Staff online

Members online

Total: 744 (members: 26, guests: 718)
Top