Solved Network services filter issue - AX86U Pro - ASUSWRT

[bennor]

Also, when using the Network Service Filter tab, this too no longer works. The screen is left with the spinner perpetually. Tried in multiple browsers. The apply button does seem to be broken

View attachment 53904

interesting on this tab, rather than a no-op, this tab will show the wait spinner then log you out after about 20 seconds or so

You appear to be experiencing a completely different issue that is unrelated to the issue discussed in this posted topic dealing with Network Service Filter values not being saved. In this topic the Network Service Filter page would refresh without a value being saved when the apply button was selected.

You should, if you haven't already, start a new separate topic with your issue since it is unrelated to this one. The Asus-Merlin subforum would likely be an appropriate place for your issue since you are running the Asus-Merlin firmware:

Asuswrt-Merlin

Use this forum for posts about all versions of this alternative firmware for ASUS wireless routers

www.snbforums.com

 

[fakhan1]

I have been facing this issue on RT-AC3100 after upgrading to Merlin new version in 2022.

I am unable to save, after adding any rule in section "Firewall - Network Services Filter". Merlin keeps showing "Applyinh Setting" and then finally asks user to re-log on. Tried multiple times with same result. Each saving rule attempt results in kernel potentially unexpected fatal signal 11.

Nov 30 23:44:17 kernel: httpd/425: potentially unexpected fatal signal 11.
Nov 30 23:44:17 kernel: Pid: 425, comm: httpd
Nov 30 23:44:17 kernel: CPU: 1 Tainted: P (2.6.36.4brcmarm #1)
Nov 30 23:44:17 kernel: PC is at 0x65e40
Nov 30 23:44:17 kernel: LR is at 0x2afea5e0
Nov 30 23:44:17 kernel: pc : [<00065e40>] lr : [<2afea5e0>] psr: 60000010
Nov 30 23:44:17 kernel: sp : 7e981b50 ip : 2b0b093c fp : 00000001
Nov 30 23:44:17 kernel: r10: 7e981ba8 r9 : 7e981bac r8 : 00000000
Nov 30 23:44:17 kernel: r7 : 00145718 r6 : 00000000 r5 : 00000000 r4 : 00145718
Nov 30 23:44:17 kernel: r3 : 2b0a42d4 r2 : 00000258 r1 : 000812f6 r0 : 2b0b54e8
Nov 30 23:44:17 kernel: Flags: nZCv IRQs on FIQs on Mode USER_32 ISA ARM Segment user
Nov 30 23:44:17 kernel: Control: 10c53c7d Table: 5c94004a DAC: 00000015

 

[ColinTaylor]

I have been facing this issue on RT-AC3100 after upgrading to Merlin new version in 2022.

I am unable to save, after adding any rule in section "Firewall - Network Services Filter". Merlin keeps showing "Applyinh Setting" and then finally asks user to re-log on. Tried multiple times with same result. Each saving rule attempt results in kernel potentially unexpected fatal signal 11.

Nov 30 23:44:17 kernel: httpd/425: potentially unexpected fatal signal 11.
Nov 30 23:44:17 kernel: Pid: 425, comm: httpd
Nov 30 23:44:17 kernel: CPU: 1 Tainted: P (2.6.36.4brcmarm #1)
Nov 30 23:44:17 kernel: PC is at 0x65e40
Nov 30 23:44:17 kernel: LR is at 0x2afea5e0
Nov 30 23:44:17 kernel: pc : [<00065e40>] lr : [<2afea5e0>] psr: 60000010
Nov 30 23:44:17 kernel: sp : 7e981b50 ip : 2b0b093c fp : 00000001
Nov 30 23:44:17 kernel: r10: 7e981ba8 r9 : 7e981bac r8 : 00000000
Nov 30 23:44:17 kernel: r7 : 00145718 r6 : 00000000 r5 : 00000000 r4 : 00145718
Nov 30 23:44:17 kernel: r3 : 2b0a42d4 r2 : 00000258 r1 : 000812f6 r0 : 2b0b54e8
Nov 30 23:44:17 kernel: Flags: nZCv IRQs on FIQs on Mode USER_32 ISA ARM Segment user
Nov 30 23:44:17 kernel: Control: 10c53c7d Table: 5c94004a DAC: 00000015

I already reported this here and here.

 

[parkuozi]

As of today 12/31/2023 the "Network services Filter" Tab is now fixed in the Firmware and is now working.

I downloaded Firmware Version: 3.0.0.4.388_24231 on my RT-AX86U and the Network Service Screen is now working thanks to all who researched this and reached out to the ASUS Team to report the issue. A big thanks to the ASUS team for fixing this. Hope you keep monitoring these Boards and fix this sooner in the future.

BTW I had to force update the router as a normal pull failed to retrieve the new version. I also noticed ASUS RT-AC68U is on Firmware version 3.0.0.4.386_51668. Not sure if this would break my RT-AX86U
https://www.asus.com/us/networking-...ters/rtac68u/helpdesk_bios?model2Name=RTAC68U.


I do have the Original Factory Firmware and many of the suggestions above are specific to Merlin and do not work on the Factory Firmware. or I am not aware of how to make it work.

Happy New year to all.

 

[L&LD]

Please don't copy/paste your message to multiple forums.

Happy New Year!