What's new

Old Firmware RT-N66u 3.0.0.4.260

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

jonnis555

New Around Here
Hi,

I oppdated to the latest firmware for my router RT-N66u, but now I have a big signal loss from the router.

My original firmware was 3.0.0.4.260 and it was working perfectly.

Can anyone provide me With the old firmware 3.0.0.4.260 or 270?

Thanks in advance!
 
To protect yourself against threats from the Internet, you better upgrade to the latest Merlin version firmware which contains the latest security fixes and should support your RT-N66U very well:
http://www.mediafire.com/download/s9eohajb7jdul5h/RT-N66U_3.0.0.4_374.42_0.zip

[EDIT] Reason to advise the Merlin version is that it contains all the recent updates and a special wireless driver which is known to help most users who suffer problems with newer firmware. The old .270 (and older) firmware versions do contain various security issues.
 
Last edited:
After updating your firmware to the latest available (374.42 RMerlin version), I would also do the following:

Full reset to defaults via the gui and after it completes; do a manual power cycle (unplug the power cord, wait for a couple of minutes and then plug it back in).

Now, manually setup the router again for your network and ISP. Do not use a config restore file to do so (this will negate the reset to defaults).

Use a new ssid for your wifi bands; or on each device you've connected to your existing network; 'forget this network' and then re-associate the device to the router again.


With the above steps complete, you will have a 2014 level router that is as fast or faster than it ever was with the best security possible at this time.


Do note though that if you're using Guest Networks that does seem to be partially broken (the guest networks work, but the limit access to the lan isn't working as it should be).


http://forums.smallnetbuilder.com/showpost.php?p=121020&postcount=10
 
I have .270 if you want it. It's on the 4 shared website.


Sent from my iPad using Tapatalk
 
Offering firmware .270 or any old version is like offering someone to remove the locks from their home.
I guess there was a good reason for Asus to remove it from the download site.
It is not a matter if, but when known vulnerabilities are exploited.
I know that the majority of routers of all manufacturers run old firmware because most users are unaware of the risks or even unaware of the existence of firmware. On purpose reverting to old vulnerable firmware is a different story which shall not be encouraged.
 
Last edited:
If the coverage of this device wasn't affected by the updates I should have used the latest. But "progress" isn't always better for that :mad:

I use my RT as AP.
Do I run the same risks as when using the RT as router/DNS server etc?
 
I use my RT as AP.
Do I run the same risks as when using the RT as router/DNS server etc?
With the RT-N66U as pure AP behind a router there is not much risk at the RT-N66U end.
Risks are where Internet NAT and DNS queries take place (the usual router functions).
 
Search 4 shared website all the firmwares are there.

Sent from my LG-D800 using Tapatalk
 
Last edited:

Similar threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top