New RT-AC87U with Merlin 380.64_2 was running hotter then I would like, even though 87c (188F) is within normal operating temperature. I figure cooler temps will prolong life of the components.
I had a laptop cooling pad but it draws a 550 ma from the USB 2.o port, which is higher than I like. So I fabricated a mount using a 120mm 12vdc case fan. The mount is made out of wood, with the fan mortise in from the bottom, and the top is mortised for outflow wind channels towards each side of the RT-AC87U vents. The 12vdc fan is running great and quieter off the 5v USB 2.0 port on the router.
Net results, before fan temp 87C (188F) down to 62C (145F) using less than 80ma, and practically whisper quiet.
I had a laptop cooling pad but it draws a 550 ma from the USB 2.o port, which is higher than I like. So I fabricated a mount using a 120mm 12vdc case fan. The mount is made out of wood, with the fan mortise in from the bottom, and the top is mortised for outflow wind channels towards each side of the RT-AC87U vents. The 12vdc fan is running great and quieter off the 5v USB 2.0 port on the router.
Net results, before fan temp 87C (188F) down to 62C (145F) using less than 80ma, and practically whisper quiet.