Release RT-AX86U_Pro : 3.0.0.6.102_34334 2024/11/06

[bbunge]

ASUS RT-AX86U Pro Firmware version 3.0.0.6.102_34334

Version 3.0.0.6.102_34334

58.23 MB

2024/11/06

1. Strengthened input validation and data processing workflows to further protect information security.
2. Enhanced AiCloud password protection mechanisms, safeguarding against unauthorized access attempts.
3. Enhanced device security through improved buffer handling in connection features.
4. Refined data handling processes, ensuring secure and accurate information management.
5. Enhanced file access control mechanisms, promoting a more secure operating environment.
6. Strengthened certificate protection, providing enhanced data security.

Please unzip the firmware file, and then verify the checksum.
SHA256: 25962af83278b3da6f46782167c5cc3b13bc36eef3cb388b6eade5241b356959

https://dlcdnets.asus.com/pub/ASUS/wireless/RT-AX86U%20Pro/FW_RT_AX86U_PRO_300610234334.zip?model=RT-AX86U%20Pro

 

[VANT]

Firmware version 3.0.0.6_102_34334-gc806ad3_403-gd851b
- Release Note -

Bug Fixes and Enhancements：
1. Strengthened input validation and data processing workflows to further protect information security.
2. Enhanced AiCloud password protection mechanisms, safeguarding against unauthorized access attempts.
3. Enhanced device security through improved buffer handling in connection features.
4. Refined data handling processes, ensuring secure and accurate information management.
5. Enhanced file access control mechanisms, promoting a more secure operating environment.
6. Strengthened certificate protection, providing enhanced data security.

 

[danlat1415]

Thanks.
Managed to update through 'Check for update' on router settings.
Not yet available online as a file download

 

[pandora0001]

https://dlcdnets.asus.com/pub/ASUS/wireless/RT-AX86U%20Pro/FW_RT_AX86U_PRO_300610234334.zip?model=RT-AX86U%20Pro

 

[OzarkEdge]

Updated both router AX88U Pro to 33338 and node AX86U Pro to this 34334... both releases appear to be noted similarly and rushed out together (why I decided to try them at once)... I could not get the router webUI AiMesh page to populate (maybe same webUI display issue fixed here?), among other weirdness, so I'll pass on these releases... they feel rushed out by the webUI and are still not listed on their website.

OE

 

[Tech9]

they feel rushed

Because of the recently discovered malware damaging Asus routers.

 

[bennor]

Some of the Asus pages have been updated with direct manual file download link for 3.0.0.6.102_34334.
https://www.asus.com/supportonly/rt-ax86u pro/helpdesk_bios/
https://www.asus.com/us/supportonly/rt-ax86u pro/helpdesk_bios/
https://www.asus.com/us/networking-...6u-pro/helpdesk_bios/?model2Name=RT-AX86U-Pro

However, as of this post, the following link still show the older 10/16 3.0.0.6.102_34319 firmware. Use the the above links if needed.
https://www.asus.com/networking-iot...6u-pro/helpdesk_bios/?model2Name=RT-AX86U-Pro

 

[bennor]

Just a general complaint about the Guest Network Pro. It really doesn't operate as one (at least me) would think or expect in some cases. Take for example the default IoT option selection. You would think (at least I do) that setting up IoT network would isolate the guest network IoT from the main LAN (no intranet access), but it doesn't happen when the Guest Network Pro Use same subnet as main network option is enabled. The user has to disable that setting to get the IoT to be isolated from the main LAN.

This creates a second issue if one wants to manually set IP addresses for their Guest Network Pro clients. When the Use same subnet as main network is disabled it obviously doesn't pull an IP address from the main LAN address pool (including any main LAN manual IP reservations). There doesn't appear (at first/second glance) to be a way to manually set IP reservations on Guest Network Pro clients when not using the same subnet as main network. So it appears to be a stupid trade off. If you want manual reservations you apparently cannot block intranet access, if you want to block intranet access then disable the Use same subnet as main network option for the Guest Network Pro group and you cannot set manual IP reservations for that Guest Network Pro group.

Even using the Customized Network didn't work as expected when setting Intranet access to disable and Use same subnet as main network to enable. Could still access the intranet. Had to disable Use same subnet as main network to truly disable intranet access when setting up a Customized Network.

Frustrating.

PS: Another observation. When Use same subnet as main network is disabled, one apparently cannot assign internal LAN network DNS servers like Pi-Hole to the Guest Network Pro group Advanced Settings > DNS Server > Assign section. The ugly workaround is to set the router's WAN DNS server(s) to the Pi-Hole's (which may or may not cause other possible issues depending on settings), then set the Guest Network Pro group's DNS server to Default. That seems to work at getting Guest Network Pro clients that are intranet isolated to use the main LAN Pi-Hole servers. The downside is that by using the router's WAN DNS servers any DNS requests logged by the Pi-Hole will show up as the router name and not the individual Guest Network Pro client name. Another frustrating trade off.

 

[maxbraketorque]

Interesting to hear. The last time I tried 3006, GN functionality was only partially implemented.