Skynet SkyNet Seems to be installed and running, but NO DATA in Merlin - SOLVED

[grahamgo]

RT-AX88U running Merlin version 3004.388.7
Installed Skynet using amtm
Router Model; RT-AX88U
Skynet Version; v7.5.9 (17/04/2024) (8bafa9c0ff41295c24a7871a8ad416b2)
iptables v1.4.15 - (vlan300 @ 192.168.1.1)
ipset v7.6, protocol version: 7
IP Address; (--------------) - (/)
FW Version; 388.7_0 (Apr 26 2024) (4.1.51)
Install Dir; /tmp/mnt/16GB-amtm/skynet (12.0G / 14.8G Space Available)
SWAP File; /tmp/mnt/16GB-amtm/myswap.swp (2.0G)

Using amtm. The debug test info shows that 18/18 tests successful (logging is enabled)
[#] 40447 IPs (+0) -- 2838 Ranges Banned (+0) || 7367 Inbound -- 420 Outbound Connections Blocked! [debug] [7s]

So Skynet appears to be installed and is running. However, when I open the SkyNet tab in Merlin I see the following

Skynet Statistics
Monitoring From To
Log Size - (0B

No Data to display.

Also in amtm. Running Open Skynet. Menu option 13 (stats). [1],[1],[1] It says "no logging detected, give this time to generate". But the SkyNet has been running for two days now.

I request some help. I have been trying to get it to work for 5 days now, and performed multiple installations. Logging is enabled, but it seems not to be logging, hence in Merlin nothing is ever displayed. What can I do to debug this?

SORRY! I cannot find a way to delete this post. But I have found the fix in another thread. I had to change the Merlin Log to Notice + Debug, now SkyNet works . NOTE. I had never used the Log and have never changed the default settings. So suggest that this necessary info be included somewhere in the SkyNet installation check. Anyway, after 5 days of trying, I'm very happy to have found the solution. Thanks!

 

[DJones]

RT-AX88U running Merlin version 3004.388.7
Installed Skynet using amtm
Router Model; RT-AX88U
Skynet Version; v7.5.9 (17/04/2024) (8bafa9c0ff41295c24a7871a8ad416b2)
iptables v1.4.15 - (vlan300 @ 192.168.1.1)
ipset v7.6, protocol version: 7
IP Address; (--------------) - (/)
FW Version; 388.7_0 (Apr 26 2024) (4.1.51)
Install Dir; /tmp/mnt/16GB-amtm/skynet (12.0G / 14.8G Space Available)
SWAP File; /tmp/mnt/16GB-amtm/myswap.swp (2.0G)

Using amtm. The debug test info shows that 18/18 tests successful (logging is enabled)
[#] 40447 IPs (+0) -- 2838 Ranges Banned (+0) || 7367 Inbound -- 420 Outbound Connections Blocked! [debug] [7s]

So Skynet appears to be installed and is running. However, when I open the SkyNet tab in Merlin I see the following

Skynet Statistics
Monitoring From To
Log Size - (0B

No Data to display.

Also in amtm. Running Open Skynet. Menu option 13 (stats). [1],[1],[1] It says "no logging detected, give this time to generate". But the SkyNet has been running for two days now.

I request some help. I have been trying to get it to work for 5 days now, and performed multiple installations. Logging is enabled, but it seems not to be logging, hence in Merlin nothing is ever displayed. What can I do to debug this?

SORRY! I cannot find a way to delete this post. But I have found the fix in another thread. I had to change the Merlin Log to Notice + Debug, now SkyNet works . NOTE. I had never used the Log and have never changed the default settings. So suggest that this necessary info be included somewhere in the SkyNet installation check. Anyway, after 5 days of trying, I'm very happy to have found the solution. Thanks!

No worries glad you figured it out. Change the blue title tag under edit thread from Skynet to Solved if you want.

 

[grahamgo]

No worries glad you figured it out. Change the blue title tag under edit thread from Skynet to Solved if you want.

Ok, I think I have done what you requested, thanks.

 

[DJones]

Ok, I think I have done what you requested, thanks.

Close enough.