Unbound Unbound not working on GT-AX6000

[Raphie]

When installing unbound via AMTM FW I get an unbound Entware missing error.
However entware is installed (as part of Diversion)
but it seems paths for the 386.6 branch FW are different than the routers running 352.2
On my 386.5.2 routers it’s working fine.
Can someone with an AX6000 pls test to see if they can install? It’s probably a path / symlink thing, but I don’t have enough Linux knowledge to start tinkering there.
tried the install script from Github directly as well, same issue. So someone with more knowledge then me needs to figure out the differences branches.
As I will not be the only one encountering this.

 

[dave14305]

I think the Entware install probably failed because amtm pipes the script to sh, which seems to be ambiguous on your router.

Ideas:

ls -l $(which sh)
wget --timeout=10 --tries=3 --retry-connrefused -qO - "https://bin.entware.net/aarch64-k3.10/installer/generic.sh" | /bin/sh

 

[Raphie]

That would then trigger a manual (re)install with the right path?

 

[Raphie]

Connected to 192.168.1.1.
login as: admin
admin@192.168.1.1's password: ***********


ASUSWRT-Merlin GT-AX6000 386.6_0 Wed Apr 20 01:45:24 UTC 2022
admin@GT-AX6000-AD78:/tmp/home/root# ls -l $(which sh)
lrwxrwxrwx 1 admin root 7 May 11 21:20 /opt/bin/sh -> /bin/sh
admin@GT-AX6000-AD78:/tmp/home/root# wget --timeout=10 --tries=3 --retry-connrefused -qO - "https://bin.entware.net/aarch64-k3.10
Info: Checking for prerequisites and creating folders...
Warning: Folder /opt exists!
Warning: Folder /opt/bin exists!
Warning: If something goes wrong please clean /opt folder and try again.
Warning: Folder /opt/etc exists!
Warning: If something goes wrong please clean /opt folder and try again.
Warning: Folder /opt/lib/opkg exists!
Warning: If something goes wrong please clean /opt folder and try again.
Warning: Folder /opt/tmp exists!
Warning: If something goes wrong please clean /opt folder and try again.
Warning: Folder /opt/var/lock exists!
Warning: If something goes wrong please clean /opt folder and try again.
Info: Opkg package manager deployment...
--2022-05-13 18:51:32-- http://bin.entware.net/aarch64-k3.10/installer/opkg
Resolving bin.entware.net... 188.114.97.3, 188.114.96.3, 2a06:98c1:3120::3, ...
Connecting to bin.entware.net|188.114.97.3|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 860008 (840K) [application/octet-stream]
Saving to: '/opt/bin/opkg'

/opt/bin/opkg 100%[=================================================================================

2022-05-13 18:51:32 (13.9 MB/s) - '/opt/bin/opkg' saved [860008/860008]

--2022-05-13 18:51:32-- http://bin.entware.net/aarch64-k3.10/installer/opkg.conf
Resolving bin.entware.net... 188.114.96.3, 188.114.97.3, 2a06:98c1:3121::3, ...
Connecting to bin.entware.net|188.114.96.3|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 175 [application/octet-stream]
Saving to: '/opt/etc/opkg.conf'

/opt/etc/opkg.conf 100%[=================================================================================

2022-05-13 18:51:32 (20.6 MB/s) - '/opt/etc/opkg.conf' saved [175/175]

Info: Basic packages installation...
Downloading http://bin.entware.net/aarch64-k3.10/Packages.gz
Updated list of available packages in /opt/var/opkg-lists/entware
Package entware-opt (227000-3) installed in root is up to date.
Info: Congratulations!
Info: If there are no errors above then Entware was successfully initialized.
Info: Add /opt/bin & /opt/sbin to $PATH variable
Info: Add "/opt/etc/init.d/rc.unslung start" to startup script for Entware services to start
Info: Found a Bug? Please report at https://github.com/Entware/Entware/issues
admin@GT-AX6000-AD78:/tmp/home/root#

 

[dave14305]

Now what happens if you try to install something? Or verify opkg:

opkg update
opkg list-installed

 

[Raphie]

Same error, see bottom screenshot

 

[Raphie]

Connected to 192.168.1.1.
login as: admin
admin@192.168.1.1's password: ***********


ASUSWRT-Merlin GT-AX6000 386.6_0 Wed Apr 20 01:45:24 UTC 2022
admin@GT-AX6000-AD78:/tmp/home/root# opkg update
Downloading http://bin.entware.net/aarch64-k3.10/Packages.gz
Updated list of available packages in /opt/var/opkg-lists/entware
admin@GT-AX6000-AD78:/tmp/home/root# opkg list-installed
bind-dig - 9.18.1-2
bind-libs - 9.18.1-2
ca-bundle - 20211016-1
column - 2.37.3-3
coreutils - 9.0-2
coreutils-base64 - 9.0-2
diffutils - 3.8-1
entware-opt - 227000-3
entware-release - 1.0-2
entware-upgrade - 1.0-1
findutils - 4.9.0-1
grep - 3.7-2
haveged - 1.9.17-1
libatomic - 8.4.0-11
libc - 2.27-11
libevent2 - 2.1.12-1
libexpat - 2.4.7-2
libgcc - 8.4.0-11
libhavege - 1.9.17-1
libmnl - 1.0.4-2
libnghttp2 - 1.44.0-1
libopenssl - 1.1.1n-1
libopenssl-conf - 1.1.1n-1
libpcre - 8.45-2
libpthread - 2.27-11
librt - 2.27-11
libsmartcols - 2.37.3-3
libssp - 8.4.0-11
libstdcpp - 8.4.0-11
libunbound - 1.15.0-1
libuv - 1.44.1-1
locales - 2.27-9
opkg - 2022-01-09-2edcfad1-1
pixelserv-tls - 2.4-1
terminfo - 6.3-1a
unbound-anchor - 1.15.0-1
unbound-checkconf - 1.15.0-1
unbound-control - 1.15.0-1
unbound-daemon - 1.15.0-1
zlib - 1.2.12-1
zoneinfo-asia - 2022a-1
zoneinfo-europe - 2022a-1
admin@GT-AX6000-AD78:/tmp/home/root#

 

[dave14305]

Same error, see bottom screenshot

What happens if you manually run opkg update

Nevermind, I already had you do that above. Odd. Unbound_Manager modifies the PATH for reasons probably long-forgotten. Probably an issue on your newly-supported router.

 

[Raphie]

Yup, someone needs to get nitty gritty with the scripts and update for ax6000, it’s broken

 

[visortgw]

It may be specific to Unbound_Manager as I have successfully installed multiple add-ons to GT-AX6000, but I haven't tried Unbound.

 

[Raphie]

Yes Diversion and Skynet work fine.