Hey Guys
I have done lots of searching but i cant find what im looking for, so i show just ask.
Setup first.
I have a Asus AC66U running merlin, l have fiberop internet with vlan 34 for TV and vlan 35 for internet. I have setup port 4 for TV and all internet traffic is on wan port with vlan 35. Running Great.
Our internet provider has a app which can control the TV pvr. My question is the commands do i use, so my wireless device can control the tv as they are both on different vlans and dont see each other.
Robocfg show:
Switch: enabled gigabit
Port 0: 1000FD enabled stp: none vlan: 2 jumbo: off mac:
Port 1: 10FD enabled stp: none vlan: 1 jumbo: off mac:
Port 2: DOWN enabled stp: none vlan: 1 jumbo: off mac:
Port 3: DOWN enabled stp: none vlan: 1 jumbo: off mac:
Port 4: 100FD enabled stp: none vlan: 32802 jumbo: off mac:
Port 8: 1000FD enabled stp: none vlan: 1 jumbo: off mac:
VLANs: BCM53115 enabled mac_check mac_hash
1: vlan1: 1 2 3 8t
2: vlan2: 0 8u
34: vlan34: 0t 4
35: vlan35: 0t 8t
I have done lots of searching but i cant find what im looking for, so i show just ask.
Setup first.
I have a Asus AC66U running merlin, l have fiberop internet with vlan 34 for TV and vlan 35 for internet. I have setup port 4 for TV and all internet traffic is on wan port with vlan 35. Running Great.
Our internet provider has a app which can control the TV pvr. My question is the commands do i use, so my wireless device can control the tv as they are both on different vlans and dont see each other.
Robocfg show:
Switch: enabled gigabit
Port 0: 1000FD enabled stp: none vlan: 2 jumbo: off mac:
Port 1: 10FD enabled stp: none vlan: 1 jumbo: off mac:
Port 2: DOWN enabled stp: none vlan: 1 jumbo: off mac:
Port 3: DOWN enabled stp: none vlan: 1 jumbo: off mac:
Port 4: 100FD enabled stp: none vlan: 32802 jumbo: off mac:
Port 8: 1000FD enabled stp: none vlan: 1 jumbo: off mac:
VLANs: BCM53115 enabled mac_check mac_hash
1: vlan1: 1 2 3 8t
2: vlan2: 0 8u
34: vlan34: 0t 4
35: vlan35: 0t 8t