ZyXEL GS1900-8HP 8-port GbE Smart Managed PoE Switch Reviewed

[Shonk]

The review here didnt get updated with the specs and i found it hard to find them

http://www.smallnetbuilder.com/lanw...-8-port-gbe-smart-managed-poe-switch-reviewed

anyway my ZyXEL GS1900-24E arrived today

I managed to get out of the cli anyway here's the specs

I presume mine is the Realtek 8382M being the 24 port version

Switch# show  version
Loader Version   : 2011.12.39239.41394
Loader Date      : Jul 25 2013 - 09:27:53
Firmware Version : V2.00(AAHK.1)
Firmware Date    : Mon Oct 20 19:06:52 CST 2014
Switch# ping -h;sh${IFS}-a${IFS}telnet
BusyBox v1.00 (2014.10.20-11:07+0000) multi-call binary


# cat /proc/version
[B]Linux version 2.6.19 (jiucai2012_wang@realsil-9be1f83.realsil.com.cn) (gcc version 3.4.4 mipssde-6.03.00-20051020) #8 PREEMPT Mon Oct 20 19:11:36[/B] CST 2014

#  [B](Edited for cloudflare block u name -a) [/B]
[B]Linux (none) 2.6.19 #8 PREEMPT Mon Oct 20 19:11:36 CST 2014 mips unknown[/B]

# cat /proc/cpuinfo
system type             : [B]RTL8380[/B]
processor               : 0
cpu model               : MIPS 4KEc V7.0
BogoMIPS                : 498.07
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : yes
hardware watchpoint     : yes
ASEs implemented        : mips16
VCED exceptions         : not available
VCEI exceptions         : not available

# cat /proc/meminfo
MemTotal:        [B]62416 kB[/B]
MemFree:         13720 kB
Buffers:          2160 kB
Cached:          22280 kB
SwapCached:          0 kB
Active:          15484 kB
Inactive:        15244 kB
SwapTotal:           0 kB
SwapFree:            0 kB
Dirty:               0 kB
Writeback:           0 kB
AnonPages:        6312 kB
Mapped:           2756 kB
Slab:                0 kB
SReclaimable:        0 kB
SUnreclaim:          0 kB
PageTables:        408 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:     31208 kB
Committed_AS:    14676 kB
VmallocTotal:  1048404 kB
VmallocUsed:     13320 kB
VmallocChunk:  1032120 kB
#


# ps
  PID  Uid     VmSize Stat Command
    1 root        272 S   init
    2 root            SWN [ksoftirqd/0]
    3 root            SW< [events/0]
    4 root            SW< [khelper]
    5 root            SW< [kthread]
    6 root            SW< [kblockd/0]
    7 root            SW  [pdflush]
    8 root            SW  [pdflush]
    9 root            SW< [kswapd0]
   10 root            SW< [aio/0]
   11 root            SW  [mtdblockd]
   24 root            SW< [loop0]
   30 root            SWN [jffs2_gcd_mtd3]
   33 root            SWN [jffs2_gcd_mtd4]
   44 root            RW< [WA Monitor Thre]
   56 root            SW< [LinkMonIsrThrea]
   57 root            SW< [Port Monitor Th]
   58 root            SW< [Port Security T]
   59 root            SW< [ACL Shutdown Th]
   64 root            SW< [Fiber Monitor T]
   65 root            SW< [Ext GPIO Thread]
   73 root            SW< [STP RX Thread]
   74 root            SW< [MSTP FSM Thread]
   75 root            SW< [MSTP Routine Th]
   76 root            SW< [MSTP Tick Threa]
   80 root            SW< [LACP RX Thread]
   83 root            SW< [IGMP RX Thread]
   86 root            SW< [DOT1X RX Thread]
   87 root            SW< [DOT1X RADIUS RX]
   88 root            SW< [DOT1X ARP RX Th]
   94 root            SW< [Voice VLAN Time]
   97 root            SW< [LACP RX Thread]
   98 root            SW< [TX Thread]
   99 root            SW< [Timer Thread]
  102 root            SW< [RLDP RX Thread]
  103 root            SW< [RLDP TX Thread]
  104 root            SW< [RLDP Enable Thr]
  114 root        212 S   klogd
  194 root        288 S   syslogd
  198 root       1136 S   polld
  200 root       1160 S   ksid
  202 root       1044 S   zon
  205 root        284 S   /bin/sh
  206 root        296 S   sh -c /bin/cli
  211 root       3076 S   /bin/cli
  214 root       1728 S   boa -c /home/
  215 root        888 S   boa -c /home/ -s
  216 root       1160 S   ksid
  233 root        576 S   dhcpcd -i Switch -t 315360000
  420 root        236 S   inetd
  427 root        224 S   /bin/telnetd
  428 root       3544 S   /bin/cli -a telnet -H 192.168.0.31
  480 root        300 S   sh -c ping -c 4 -h;sh${IFS}-a${IFS}telnet
  482 root        356 S   sh -a telnet
  483 root        292 R   ps

 

[Veldkornet]

I understand that this topic is from a while back, but I was wondering if the GS1900 models support SNMP 64-bit counters?

I can't really find any solid information on it.


Sent from my iPhone using Tapatalk