Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. FTC

    GUI on AiMesh Node

    Hi, Almost changing any setting in the GUI that should survive a reboot will cause a 'NVRAM Commit' internally. This is because settings are stored in the NVRAM and the way to make sure they 'hold' (effectively written to NVRAM and not only as a RAM copy) is through the 'commit' command. Now...
  2. FTC

    Beta Asuswrt-Merlin 386.7 Beta is now available

    This is great news. anyone else can confirm pixelserv-tls/diversion problems with RT-AX88 are gone with this beta ?
  3. FTC

    Slow smb transfer in ASUS RT AX88U

    Hi, regarding the PC with n interface, note that it is quite usual to get real throughput that is quite smaller than the theoretical max speed in wifi, due to the protocol overhead and being a shared channel with neighbours, other clients,... although I agree that 32 is much smaller than 150...
  4. FTC

    Slow smb transfer in ASUS RT AX88U

    Hi, yes, I mean MBps and the figure of 100MBps is wired. However, via wifi it is not so different, i.e Ijust copied a 1.5GB divx film from my router USB drive in 18 seconds via wifi, which is close to 83 MBPs.
  5. FTC

    Slow smb transfer in ASUS RT AX88U

    Hi, that performance is surely not right. I can do 100MBps SMB transfers with my AX88. In my case, with a USB 3.0 drive NTFS formatted and Merlin 386.3_2. (I am not using 386.5 due to a current incompatibility with pixelsrv... USB unrelated) I would definetly do the wired test to rule out any...
  6. FTC

    AX56U - as a mesh node

    Hi, I have an ax56 as an imesh node (cable connected) running also merlin last version, with an AX88U as a main router. This setup has been running like that for a year and a half aready. Not a single problem with the node since, and very good performance, so highly recommended.
  7. FTC

    Release Asuswrt-Merlin 386.4 is now available

    Hi, just a brief post to confirm my succesful upgrade to 386.4 after a full stable 80 day period on 386.3_2 in my Aimesh installation (AX88U server and AX56U node) and using mainly Diversion / Samba / OVPN / DLNA / AiProtection / IPTV functionality with a PPPoE FFTH 1Gb connection. Thanks...
  8. FTC

    IPTV Issue when upgrading to 386.3_2

    Hi. You are right that the DNSs you setup for LAN or in the WAN pages, (or the DNS filter settings) should not interfere with the DNS used and configured specifically for the Movistar Triple VLAN profile IPTV, but we are supposing that something interferes with it, and logically it could be...
  9. FTC

    IPTV Issue when upgrading to 386.3_2

    Hi, I don't think there is anything else to configure than just setting the proper profile (Movistar triple VLAN) and IP/DNS/mask/gateway for IPTV. It may/could then be something else that is confugured and interferes with the Movistar profile. Have you tried a full router reset and starting by...
  10. FTC

    IPTV Issue when upgrading to 386.3_2

    Hi, I am not sure on why it does not work for you, but I can confirm that in my case the 'Movistar triple VLAN' profile works perfectly under Merlin 386.3_2 (and all previous 386 firmwares) on my RT-AX88U. Are you sure you have correctly set up your decoder IP and DNS settings for IPTV ?
  11. FTC

    Beta Asuswrt-Merlin 386.3 beta is now available

    Hi, this is to report a successfull update from 386.2_4 (which had ran flawlessly for 53 days) to 386.3.b1 on my rt-ax88u server and also on the rt-ax56u that is configured as a wired imesh client. So far and after 15 hours all seems like running fine. My WAN connection is PPPoE over FTTH...
  12. FTC

    RT-AX56U ethernet backhaul

    Hi, for what it is worth, I have an RT-AX56U as an aimesh node with ethernet backhaul and working flawlessly with my main router RT-AXC88U. Both are using Merlin 386.2_2 at the moment (Aimesh 2.0). Note that as of today, there does not exist a 386 'official' firmware for the AX56U, so what you...
  13. FTC

    RT-AX88U Max wifi uplink speed at 150Mbps

    Hi, I'd check the following : - Interferences around your router (other wifi's, bluetooth or USB devices around..) - AiProtection / QoS / traffic monitor activated (*) ? try to disable those features by withdrawing those in adminitration->Privacy GUI tab, just to test and eliminate this as a...
  14. FTC

    Release Asuswrt-Merlin 386.2 is now available

    Hi I am experiencing also a very stable behavior with 386.2, however I can see too that there is some strange behavior when changing wifi parameters. In my case there are no unexpected restarts, but I can see that many times after an unrelated wifi change (i.e setting or clearing ax mode or...
  15. FTC

    Beta Asuswrt-Merlin 386.2 Beta is now available

    Hi, this is to report a successful dirty upgrade from 386.2 beta 1 to beta 3 on my RT-AX88U aimesh router and RT-AX56U aimesh node. Everything seems like working fine at this time : DHCP / Samba / diversion / OVPN server / IPTV / DLNA / AiProtection. My WAN is fiber 1Gb PPPoE symmetric. NTP time...
  16. FTC

    Thermal tape question...

    Hi, although I do not have the GT-AC5300, the pictures I found in the web show its heatsinks to have screws to keep them over the chips. In that case my recommendation is not to use thermal pads but some K5-PRO viscous thermal paste. This way you will be able to easily fill the gap with the...
  17. FTC

    AX88U 5Ghz wifi speed

    OK Then I am affraid you have nothing else to do to improve performance at the router level. To recap, you get lower speeds from one device (P20) than with another in the same conditions (is this true?) and in both cases with proper link rates... so everything is really pointing to the P20...
  18. FTC

    AX88U 5Ghz wifi speed

    So if the P20 has a link connection of 866mbps then definetly you should get more than 300mbps of real throughput in absence of other interferences or traffic. Did you disable the airtime fairness, MIMO and universal beanforming as suggested (wifi professional settings) ?
  19. FTC

    AX88U 5Ghz wifi speed

    Exactly. What is your link rate ? (see network map 'view list')
  20. FTC

    AX88U 5Ghz wifi speed

    Hi, first of all you'd have to determine where is the bottleneck -if any-, because you are getting some respectable throughput for being over wifi. Try the in-router speedtest (or with a PC ethernet connected) to be able to discard remote server or WAN related congestions. Then look in the...
Top