amtm amtm 4.9 - the Asuswrt-Merlin Terminal Menu, June 30, 2024 (locked thread)

[heysoundude]

No worries man, I don't think @thelonelycoder was intending for it to come off as a gotcha. When I saw this post, I become instantly concerned that @Jack Yaz took all his GitHub materials down. I use a lot of his scripts because of their niche attributes.

I'm more concerned that @Jack Yaz 's work isn't being actively maintained, and hasn't been forked: while it's currently functional on Merlin, the more changes that come to pass there might make them increasingly less so. If they do break, they'll have to be removed from amtm because of abandonment. @Martinski has been wonderful at making PR's that get merged, I'm not sure we'll see many more updates moving forward unless someone picks up the torch to carry it forward.
I suppose another tack to take would be to ask Asus to include the functionalities the scripts bring in their firmware...

 

[SomeWhereOverTheRainBow]

I'm more concerned that @Jack Yaz 's work isn't being actively maintained, and hasn't been forked: while it's currently functional on Merlin, the more changes that come to pass there might make them increasingly less so. If they do break, they'll have to be removed from amtm because of abandonment. @Martinski has been wonderful at making PR's that get merged, I'm not sure we'll see many more updates moving forward unless someone picks up the torch to carry it forward.

Whats this.... a voice from out in the crowd? Does this mean you are volunteering?!?

 

[Viktor Jaep]

Whats this.... a voice from out in the crowd? Does this mean you are volunteering?!?

I second the nomination!

 

[vlord]

I‘m not aware it being a finished and amtm compatible addon.

I had assumed from this post it was ready to go

 

[Swistheater]

I had assumed from this post it was ready to go

Those were my thoughts too when I saw the thread, but then I found spdMerlin. I quickly realized I didn't need anything else.

 

[heysoundude]

Whats this.... a voice from out in the crowd? Does this mean you are volunteering?!?

I don't know nuthin' 'bout birthin' babies...or scripting for that matter. You don't want me, trust me.

 

[alan6854321]

Don't know what happened, but after updating to 3004.388.4_beta1, the routerdate crontab entry disappeared. Had to uninstall & re-install to get it back.

 

[thelonelycoder]

Don't know what happened, but after updating to 3004.388.4_beta1, the routerdate crontab entry disappeared. Had to uninstall & re-install to get it back.

Noted.

 

[alan6854321]

Noted

Ah - I found the problem.
This was my init-start script, I think that "return 0" might put a spanner in the works!

#!/bin/sh
#
# Add our scripts to cron job list.
#
cru a AGTxEM "15 3 * * * /jffs/scripts/regular-email"
cru a AGTxMQ "*/5 * * * * /jffs/scripts/send-cputemp-mqtt"
return 0
/jffs/addons/amtm/routerdate restore # Added by amtm

 

[Cedarhillguy]

Regarding the AMTM email settings (em), for the next release could you add --crlf to the curl in send_testmail function?

I setup AMTM email and the email settings were correct, but it kept giving me a curl (8) weird server reply and failing. After some research online, I discovered cause. The unix Qmail mail transfer agent was rejecting and referring me to a URL stating as bare LFs are against 822bis section 2.3 which requires a carriage return before the linefeed (LF).

Adding the -crlf in the curl call (see below) successfully sends the test email for those with hosts using qmail transfer agents.

    $(/usr/sbin/curl --connect-timeout $EMAILTIMEOUT --max-time $EMAILTIMEOUT --url $PROTOCOL://$SMTP:$PORT \
        --mail-from "$FROM_ADDRESS" --mail-rcpt "$TO_ADDRESS" \
        --upload-file "$TMPEMAILFILE" \
        --ssl-reqd \
        --crlf \
        --user "$USERNAME:$(/usr/sbin/openssl aes-256-cbc $emailPwEnc -d -in "$AMTM_EMAIL_DIR/emailpw.enc" -pass pass:ditbabot,isoi)" $SSL_FLAG 2>/dev/null) \

 

[thelonelycoder]

Regarding the AMTM email settings (em), for the next release could you add --crlf to the curl in send_testmail function?

I setup AMTM email and the email settings were correct, but it kept giving me a curl (8) weird server reply and failing. After some research online, I discovered cause. The unix Qmail mail transfer agent was rejecting and referring me to a URL stating as bare LFs are against 822bis section 2.3 which requires a carriage return before the linefeed (LF).

Adding the -crlf in the curl call (see below) successfully sends the test email for those with hosts using qmail transfer agents.

    $(/usr/sbin/curl --connect-timeout $EMAILTIMEOUT --max-time $EMAILTIMEOUT --url $PROTOCOL://$SMTP:$PORT \
        --mail-from "$FROM_ADDRESS" --mail-rcpt "$TO_ADDRESS" \
        --upload-file "$TMPEMAILFILE" \
        --ssl-reqd \
        --crlf \
        --user "$USERNAME:$(/usr/sbin/openssl aes-256-cbc $emailPwEnc -d -in "$AMTM_EMAIL_DIR/emailpw.enc" -pass pass:ditbabot,isoi)" $SSL_FLAG 2>/dev/null) \

Thanks, will be done with the next update.

 

[thelonelycoder]

amtm 4.0 is now available

What's new
This major update includes features previously only available in Diversion:
- amtm header shows Entware device and usage
- Additional checks are made during Entware install
- Cron jobs can now be viewed in amtm with cj

Additionally, these features were added:
- Shows separator for what amtm considers third-party and non third-party scripts on the i install screen
- Reset/Remove r option shows more info when selected
- Added --crlf carriage return line to test mail function, thanks to @Cedarhillguy for reporting
- A few minor fixes

And last but not least, I'm very pleased to announce:
- Adds support for BACKUPMON - Backup/Restore your Router, by @Viktor Jaep

BACKUPMON - BACKUPMON v1.40 -Nov 20, 2023- Backup/Restore your Router: JFFS + NVRAM + External USB Drive! (Now available in AMTM!)

BACKUPMON v1.40 Released November 20, 2023 First off -- HUGE thanks to @Jeffrey Young for sharing his original backup script. His script is the main engine of BACKUPMON, and all credit goes to him! BACKUPMON is simply a wrapper around Jeff's backup script functionality, adding easy-to-use...

www.snbforums.com

- Adds support for Domain-based VPN Routing, by @Ranger802004

Domain-based VPN Routing Script

Domain VPN Routing is a tool used to route specific website domains to specific VPN tunnels or override all traffic being routed to a VPN tunnel to directly route through a WAN interface. ***v2.1.0 Release**** This is the release information regarding v2.1.0, please read the notes carefully...

www.snbforums.com

How to update amtm
Use u to update to this latest version.

Note that Diversion 5.0 is not yet available.

 

[Viktor Jaep]

amtm 4.0 is now available

Thank you @thelonelycoder for the continued improvements to AMTM, and for the inclusion of BACKUPMON, @SomeWhereOverTheRainBow's additions to the Router Date Keeper and @Ranger802004's Domain-Based VPN Routing Script! We truly appreciate you!

I don't know about anyone else, but I for one am VERY excited for Diversion v5.0!

 

[Clark Griswald]

Attempting to update, yet getting:
Enter option u
rm: remove '/jffs/addons/amtm/availUpd.txt'?
No change whether "y or n" are entered.

AMTM states 4.0 installed in green, yet header states 3.8. After exiting amtm and logging in again, doesn't show amtm status in red or green, and fails to download 4.0.
Attempted uf yet fails to update amtm. Perhaps a full reinstall in in my future.

 

[thelonelycoder]

I don't know about anyone else, but I for one am VERY excited for Diversion v5.0!

Even I can‘t wait for 5.0 to see the light and get that burden off of me There are major changes to the code - so profound that this amtm 4.0 release seems like a minor update.

 

[thelonelycoder]

Attempting to update, yet getting:
Enter option u
rm: remove '/jffs/addons/amtm/availUpd.txt'?
No change whether "y or n" are entered.

AMTM states 4.0 installed in green, yet header states 3.8. After exiting amtm and logging in again, doesn't show amtm status in red or green, and fails to download 4.0.
Attempted uf yet fails to update amtm.

I don't know what's going on at the Griswald residence, but try this:
Exit amtm, then run this in the terminal:

rm /jffs/addons/amtm/a_fw/amtm.mod

Then open amtm normally.

 

[Clark Griswald]

amtm 3.8 FW by thelonelycoder
GT-AX6000 (aarch64) FW-388.4 @ 192.168.1.1
Operation Mode: Wireless router
The Asuswrt-Merlin Terminal Menu

2 open Skynet v7.4.6

5 open scribe v3.2.0

j1 open connmon v3.0.2
j2 open ntpMerlin v3.4.5
j3 open scMerlin v2.4.0

j6 open uiScribe v1.4.5

ep manage Entware packages no upd


awm Asuswrt-Merlin firmware 388.4.0

/usr/sbin/amtm: line 318: can't create /jffs/addons/amtm/availUpd.txt: Read-only file system
/usr/sbin/amtm: line 318: can't create /jffs/addons/amtm/availUpd.txt: Read-only file system
m menu amtm v3.8 -> v4.0
_____________________________________________

amtm 4.0 is now available!
See https://diversion.ch for what's new.

Update amtm now? [1=Yes e=Exit]

AFTER "1"
amtm updated from v3.8 to v4.0

Getting from fwupdate.asuswrt-merlin.net
! Module amtm.mod redownload failed, using existing file
! using fallback server diversion.ch
! Module amtm.mod redownload failed, using existing file
! Module connmon.mod redownload failed, using existing file
! Module email.mod redownload failed, using existing file
! Module entware.mod redownload failed, using existing file
! Module ntpmerlin.mod redownload failed, using existing file
! Module scmerlin.mod redownload failed, using existing file
! Module scribe.mod redownload failed, using existing file
! Module skynet.mod redownload failed, using existing file
! Module swap.mod redownload failed, using existing file
! Module uiScribe.mod redownload failed, using existing file

For third-party script updates, use their
own update function.

 

[thelonelycoder]

/usr/sbin/amtm: line 318: can't create /jffs/addons/amtm/availUpd.txt: Read-only file system

There's your problem: Read-only file system

You'll have to format the jffs partition in the WebUI if that option is available on this particular router.

 

[Ripshod]

amtm 3.8 FW by thelonelycoder
GT-AX6000 (aarch64) FW-388.4 @ 192.168.1.1
Operation Mode: Wireless router
The Asuswrt-Merlin Terminal Menu

2 open Skynet v7.4.6

5 open scribe v3.2.0

j1 open connmon v3.0.2
j2 open ntpMerlin v3.4.5
j3 open scMerlin v2.4.0

j6 open uiScribe v1.4.5

ep manage Entware packages no upd


awm Asuswrt-Merlin firmware 388.4.0

/usr/sbin/amtm: line 318: can't create /jffs/addons/amtm/availUpd.txt: Read-only file system
/usr/sbin/amtm: line 318: can't create /jffs/addons/amtm/availUpd.txt: Read-only file system
m menu amtm v3.8 -> v4.0
_____________________________________________

amtm 4.0 is now available!
See https://diversion.ch for what's new.

Update amtm now? [1=Yes e=Exit]

AFTER "1"
amtm updated from v3.8 to v4.0

Getting from fwupdate.asuswrt-merlin.net
! Module amtm.mod redownload failed, using existing file
! using fallback server diversion.ch
! Module amtm.mod redownload failed, using existing file
! Module connmon.mod redownload failed, using existing file
! Module email.mod redownload failed, using existing file
! Module entware.mod redownload failed, using existing file
! Module ntpmerlin.mod redownload failed, using existing file
! Module scmerlin.mod redownload failed, using existing file
! Module scribe.mod redownload failed, using existing file
! Module skynet.mod redownload failed, using existing file
! Module swap.mod redownload failed, using existing file
! Module uiScribe.mod redownload failed, using existing file

For third-party script updates, use their
own update function.

You have scMerlin installed, how much space is there on jffs?
[/tangent]

 

[thelonelycoder]

And I want to thank @SomeWhereOverTheRainBow for his persistence for adding the TZ timezone and using UTC for the date in the Router date keeper rd script.
Your code has made it into the file.
I apologize for not adding the merit to the original post.